MAN_Configurable text in Boarding pass BPT
- Andrea Sanguinetti
Introduction
This chapter describes the functionality that allows you to include a text in the boarding pass.
Description
This new functionality allows an indicative note to be printed on the ATB boarding pass.
This note is included in:
Boarding Pass PECTAB C (new) and all its versions, the text that is configured
Model 5112 of the thermals (it is the most complete and recommended model)
PECTAB C has the same characteristics as PECTAB B, it only has a new element added (# 8A) that is used to include the text, which is defined only to be displayed on the check stub.
The text to include in the BP is configured in the JJCHK table in the new section under the heading BOARDING PASS-CONFIGURABLE TEXT
The text included in the BP appears in the PH (the consultation of the history of the flight), both included in the checkin and in the reprint
The place where it appears in the Boarding Pass is the same one that is defined for the MB (Message Boarding, which is reported at the time of checkin PUx, MBtext free), so if the MB is reported at the time of checkin, prioritizes over the text that is configured in the configurable Boarding Pass text
The configuration of this text is done in the JJCHK under the BPT token
Text configuration
The configuration of the text must be requested by the carrier to its Executive Manager informing the following data:
Type: Domestic or International
Airport of origin of the flights: it can be for everyone, in that case ALL
Destination airport of / the flights: it can be for everyone, in that case ALL
Flight range / s from / to: can be for everyone
Text they need to show (maximum 50 characters)
Add
JJCHK<host>/BPT-ADD/TYP:<type>/ATO:<ato from>-<ato to>/FLT:<xxxx-yyyy>/TXT:<Text maximum 50 characteres> |
|---|
Description:
TYP | (Tipe of Route) indicates if the route is domestic or internacional |
ATO | Indicates ORIGIN AIRPORT and DESTINATION:
|
FLT | Indicates the flight range: xxxx-yyyy. To indicate all the range, please specify 0000-9999 |
Note:
All parameters are mandatory
Example:
JJCHKXX/BPT-ADD/TYP:DOM/ATO:AEP-MDQ/FLT:0000-1500/TXT:CIERRE PUERTA-GATE CLOSING 30 MIN BEFORE DEPTDisplay:
JJCHKXX |
|---|
-= BOARDING PASS-CONFIGURABLE TEXT =-
TYPE ATO-FRM ATO-TO FLT-RANGE TEXT
DOMESTIC AEP MDQ 0000-1500 CIERRE PUERTA-GATE CLOSING 30 MIN BEFORE DEPT
Modify (only the text)
JJCHK<host>/BPT-MOD/TYP:<type>/ATO:<ato from>-<ato to>/FLT:<xxxx-yyyy>/TXT:<Text maximum 50 characteres> |
|---|
Description:
TYP | (Tipe of Route) indicates if the route is domestic or internacional |
ATO | Indicates ORIGIN AIRPORT and DESTINATION:
|
FLT | Indicates the flight range: xxxx-yyyy. To indicate all the range, please specify 0000-9999 |
Note:
All parameters are mandatory
The item that needs to be modified should exist in the table (typ, ato and flt should match) but in case it does not exist, system will respond: "INVALID - CONFIGURATION DOES NOT EXIST"
Example:
JJCHKXX/BPT-MOD/TYP:DOM/ATO:AEP-MDQ/FLT:0000-1500/TXT:GATE CLOSING 30 MIN BEFORE DEPTDisplay
JJCHKXX |
|---|
Delete
JJCHK<host>/BPT-DEL/TYP:<type>/ATO:<ato from>-<ato to>/FLT:<xxxx-yyyy> |
|---|
Description:
TYP | (Tipe of Route) indicates if the route is domestic or internacional |
ATO | Indicates ORIGIN AIRPORT and DESTINATION:
|
FLT | Indicates the flight range: xxxx-yyyy. To indicate all the range, please specify 0000-9999 |
Note:
All parameters are mandatory
The item that needs to be deleted should exist in the table (typ, ato and flt should match) but in case it does not exist, system will respond: "INVALID - CONFIGURATION DOES NOT EXIST"
Example:
Boarding Pass modelo ATB example
Boarding Pass model 5112 (thermal) example
