JJPRS Table
In this first instance there are two configurable parameters in the Seats Pre-assignment Table. At the time of activation, default values will be assigned to each of the parameters.
[ENA] | ENABLE PRS | Number of days before flight departure when the seat pre-assignment will be available |
[DIS] | DISABLE PRS | Number of hours before flight departure when the seat pre-assignment will be available |
Considerations:
- Seat Maps are created by the system, for each flight / date, at the time of equipment assignment (KASAT) that has an designated Seat Map (KPRS)
- Parameters in this table define whether display and pre-assignment commands (4G) are allowed or not according to the flight date of departure and the date on which the commands are performed.
- CRC or inventory commands (VST and VST / SS) can be executed at any time. The system will add a notification that the pre-assignment is deactivated by this table
- Definitions of the JJPRS table are applicable to the entire Host and all systems and channels that use pre-allocation
- Values of the JJPRS table are valid from the moment the parameters are configured.
Parameters
[ENA] - Enable PRS
This field defines the number of days before the departure of each flight that will begin to offer seats pre-assignment through the reservation module.
This table starts with a default value of 90 days before the departure of the flight.
[DIS] - Disable PRS
In this field, the number of hours before the departure of each flight will be defined, which will be omitted from pre-assigning seats through the reservation module.
This table starts with a default value of 2 (two) hours before the departure of the flight.
Designated Commands
Pre-assignment command (4G)
If an attempt to display a Seat Map or pre-assign a seat is done before the date enabled in the ENABLE PRS parameter or after the time set in the DISABLE PRS parameter, the system will respond with the error message NOT ALLOWED - PRS NOT ENABLED.
Inventory commands(VST)
VST and VST /SS inventory commands will always be available for the airline to check and control . If the flight departure is before the time established in the ENABLE PRS parameter or after the DISABLE PRS parameter, the responses will show the Seat Maps information and corresponding preassigned entries together with an alert indicating that the pre-assignment is not available: PRS NOT ENABLED - CHECK JJPRS
Seat Maps Configuration
Seat Maps
Once the Seat Maps are created, they can be viewed through a list and retrieved individually, either for viewing, modification or deletion.
The Seat Map ID will always correspond to the equipment ID according to the KASAT equipment table since the Seat Map will be directly related to the equipment assigned to the flights in the Schedule module.
Seat Maps List (KPRS/SM*)
Through this fixed command you can see the list of all Seat Maps currently created in the Host.
KPRS/SM*
Response;
Seat Maps IDs are the references to the equipment IDs of the KASAT table.
Retrieve Seat Map (KPRS/SMR/)
Through this command and using the Id number, you can retrieve the Seat Maps either for viewing or editing the details.
KPRS/SMR/<id seat>
KPRS/SMR/5
SEAT-MAP CONFIGURATION * KASAT=5
UPPER DECK
C
3
w>
F iA
E iA
D
»
C
B iA
A i*$E
w>
N <= ROW HAS FREQUENT FLYER RESTRICTIONS
Y <= ROW SHOWN IN AGT
N <= ROW HAS RBD RESTRICTIONS
MAIN DECK
C Y
1 2 4 5 6 7 8 9 10 11 12 13 14 15
w>
F A A$ A A A iA * A A$L A iA A A A
E A A$ A A A iA A A A$L A iA A A A
D A A A iA A A A$L A iA A A A
» = = =
C A A A iA A A A$L A A A iA A
B A A$ A A A iA A A A$L A A A iA iA
A A A$ i*$ A A iA A A A$L A A A iA iA
w>
N N N N N N N N N N N N N N <= ROW HAS FREQUENT FLYER RESTRICTIONS
Y Y Y Y Y Y Y Y Y Y Y Y Y Y <= ROW SHOWN IN AGT
N N Y Y Y N N N N N N N N N <= ROW HAS RBD RESTRICTIONS
# RBD RESTRICTIONS
ROW CABIN RBD ALLOWED
4 Y BKY
5 Y BKY
6 Y BKY
SEAT REFERENCES:
- OCCUPPIED
A AVAILABLE
B BLOCKED
E AVAILABLE WITH AC POWER
F AVAILABLE TO FREQUENT FLYER PASSENGER
I AVAILABLE WITH INFANTS
K AVAILABLE TO OTHER RBD
L AVAILABLE EXTRA LEGROOM SEAT
M AVAILABLE TO WHEELCHAIR
R RESERVED FOR AIRLINE
U AVAILABLE TO UNACCOMPANIED MINOR
V AVAILABLE PREFERENT/PREMIUM SEAT
* MULTIPLE OPERATIONAL CHARACTERISTICS
+ AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
/ RECLINE RESTRICTED
$ CHARGEABLE SEAT
w> WINDOWS
» CORRIDOR
= EMERGENCY EXIT
[ WINGS
# OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP
x DISCREPANCY IN CHECK-IN SEATMAP
After retrieving a Seat Map (KPRS / SMR), you must save the changes (KPRS / SME) or ignore it (KPRS / SMI) to free the area. Otherwise, the system will automatically release it 24 hours after it is taken or it will show the error RESTRICTED - FINISH OR IGNORE if you try to recover another Seat Map in the same work area.
Display an active seat map in an area(KPRS/SMV)
This command is used to re-display a Seat Map that is under creation or has been previously retrieved. If there is no active Seat Map the system response will be NO DATA.
KPRS/SMV
Response:
KPRS/SMV NO DATA
The following commands are used to see all characteristics in a particular seat:
KPRS/SMV/ST<SEAT> KPRS/SMS/ST<SEAT>
Response:
KPRS/SMV/ST3F SEAT 3F CHARACTERISTICS * / - RECLINE RESTRICTED MV - SEAT WITH MOVIE O - AVAILABLE ONLY ADULTS US - SEAT WITH USB V - PREFERENT/PREMIUM SEAT w> - WINDOWS SEAT
KPRS/SMS/ST3F SEAT 3F CHARACTERISTICS * / - RECLINE RESTRICTED MV - SEAT WITH MOVIE O - AVAILABLE ONLY ADULTS US - SEAT WITH USB V - PREFERENT/PREMIUM SEAT w> - WINDOWS SEAT
Display Seat Map History (KPRS/SMH)
This command is used indicating the Seat Map ID to display the Seat Map history with all performed transactions.
Example:
KPRS/SMH/999
HISTORY - SEAT MAP [999]
KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF
KIUHELPLL - 09MAY17/1954Z
KPRS/SME/999
KIUHELPLL - 09MAY17/1954Z
KPRS/SMM/BS9E
KIUHELPLL - 09MAY17/2000Z
KPRS/SME
KIUHELPLL - 09MAY17/2000Z
KPRS/SMM/VS9A
KIUHELPLL - 10MAY17/1956Z
KPRS/SME
KIUHELPLL - 10MAY17/1956Z
KPRS/SMM/VS9AB
KIUHELPLL - 11MAY17/1956Z
KPRS/SME
KIUHELPLL - 11MAY17/1956Z
KPRS/SMD/999
KIUHELPLL - 11MAY17/2057Z
KPRS/SMA#Y/1-8ABEF
KIUHELPLL - 11MAY17/2057Z
KPRS/SME/999
KIUHELPLL - 11MAY17/2058ZConsiderations
All commands performed on a Seat Map Id will be included in the history
If a seat map is deleted and a new one is created with the same id, all the complete history will be included (creation, deletion, second creation, etc.)
Agent who performed any changes will be identified indicating date and time in UTC in which they were applied
Commands performed in chronological order will be displayed from the first and the subsequent ones.
Ignore retrieved Seat Map (KPRS/SMI)
This command allows to ignore any active seat map in an area. All changed applied not saved before ignoring will be lost.
KPRS/SMI
| KPRS/SMI |
|---|
KPRS/SMI OK
Save changes(KPRS/SME)
When editing an already created Seat Map, it is not necessary to indicate the ID or KASAT. This Id is mandatory only at the time of the first creation.
When editing, changes can be saved with the following command:
KPRS/SME
Response
OK. SEAT MAP MODIFIED KASAT CONFIG 994
Create a Seat Map (KPRS/SMA)
In order to create a Seat Map for seat pre-assignment from KIU RES, you must do the following entry.
KPRS/SMA#<cabin>/<row>-<row><seats>#<cabin>/<row>-<row><seats> |
|---|
Example:
KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF
Description:
| KPRS | Fixed command for seat pre-assignment |
|---|---|
| / | Slash |
| SM | Seat map indicator |
| A | Add indicator |
| # | Hash tag to split cabins |
| C | Cabin indicator (mandatory class) |
| / | Slash |
| 1-8 | Rows range in number from/to set for a cabin |
| ABEF | Seats/Columns seat for a cabin. |
| # | Hasg tag to split cabins if necessary. |
| Y | Cabin indicator (mandatory) |
| / | Slash |
| 9-23 | Rows from/ to set for a cabin |
| ABCDEF | Seats/Columns seat for a cabin. |
Response:
SEAT-MAP CONFIGURATION * KASAT=NEW
C Y
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
F A A A A A A A A A A A A A A A A A A A A A A A
E A A A A A A A A A A A A A A A A A A A A A A A
D A A A A A A A A A A A A A A A
C A A A A A A A A A A A A A A A
B A A A A A A A A A A A A A A A A A A A A A A A
A A A A A A A A A A A A A A A A A A A A A A A A
N N N N N N N N N N N N N N N N N N N N N N N <= ROW HAS FREQUENT FLYER RESTRICTIONS
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y <= ROW SHOWN IN AGT
N N N N N N N N N N N N N N N N N N N N N N N <= ROW HAS RBD RESTRICTIONS
SEAT REFERENCES:
· OCCUPPIED
A AVAILABLE
I AVAILABLE WITH INFANTS
V AVAILABLE PREFERENT/PREMIUM SEAT
L AVAILABLE EXTRA LEGROOM SEAT
F AVAILABLE TO FREQUENT FLYER PASSENGER
K AVAILABLE TO OTHER RBD
B BLOCKED
R RESERVED
P PRE-RESERVED SEAT
/ RECLINE RESTRICTED
$ CHARGEABLE SEAT
w> WINDOWS
» CORRIDOR
= EMERGENCY EXIT
[ WINGS
# OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP
x DISCREPANCY IN CHECK-IN SEATMAPDescription:
SEAT-MAP CONFIGURATION * KASAT=NEW | New Seat Map indicator.- Not yet saved or associated with KASAT |
|---|---|
| C Y | Cabin indicator |
| 1 2 3 ... | Rows |
| A B C D E F | Seats/Columns |
ROW HAS FREQUENT FLYER RESTRICTIONS | Rows with frequent flyer restrictions with conditions |
ROW SHOWN IN AGT | Rows marked in Y are visible in the Seat Map Display from Travel agencies |
ROW HAS RBD RESTRICTIONS | Rows marked in Y apply passengers booked in certain classes |
| REFERENCES | Seat Map References |
Save new Saeat Map (KPRS/SME/)
Once the Seat Map creation process has begun, it will be possible to proceed with the configuration of the references and desired conditions for each row / seat. This configuration can also be done as a part of the modification of a Seat Map already created.
To save a Seat Map you must use the command indicated below, always taking into account that the Seat Map number that is assigned will correspond to the equipment number of the KASAT table to which Seat Map will be associated.
The relationship will always be one to one: a seat map for each KASAT equipment.
KPRS/SME/<KASAT equipment id>
Example:
KPRS/SME/994
OK. SEAT MAP CREATED FOR KASAT CONFIG 994
Description
| KPRS | Fixed command for seat pre-assignment |
|---|---|
| / | Slash |
| SM | Seat map indicator |
| E | Indicator to save changes.(End and Save) |
| / | Slash |
| 994 | Equipment KASAT id to which the Seat Map will be associated with the same Id number |
Modify Rows/Seats (KPRS/SMM/)
Both at the time of creation (KPRS / SMA) and when retrieving an already created Seat Map (KPRS / SMR), it is possible to add and edit conditions and features to the different rows and / or seats of the Seat Map in which you are working.
Features
Use the following command in order to add features to different seats.
KPRS/SMM/<indicator><row/column/seats>
KPRS/SMM/BK<rows/seats>/<RBDs>
BK indicator uses a different format :
Indicator and options
Possible indicator:
| WN | Window rows | Columns(A) One at a time |
|---|---|---|
| AL | Aisle Rows - Should indicate the preceding and subsequent columns of the corridor | Columns (CD) The aisle is surrounded by columns C and D |
| WG | Rows over the wing | Rows (10)One at a time |
| EX | Emergency Exit) | Row(10) One at a time |
| AI | Infant seats | Rows (1*2*) Seats (1AB) |
| BS | Blocked seats | Rows (1*2*) Seats (1AB) |
| RS | Seats reserved for airline usage | Rows(1*2*) Seats (1AB) |
| NR | Non recline seats | Rows (1*2*) Seats (1AB) |
| VS | Preferred Seats (VIP) | Rows (1*2*) Seats (1AB) |
| LS | Extra leg rooms seats | Rows (1*2*) Seats (1AB) |
| OA | Seat available only for adult passengers | Rows (1*2*) Seats(1AB) |
| SHA | Seats available with viewership from travel agencies | Rows (1*2*) |
| BK | Rows with restrictions according to RBD | Rows (1*2*) Rows or seats in between: 8-9B (in front of seat 9B) 0-1* (in front of row 1) |
| LA | No Seat - Lavatory | Rows (1*2*) Seats(1AB) Rows or seats in between: 8-9B (in front of seat 9B) 0-1* (in front of row 1) |
| GN | No Seat - Galley | Rows (1*2*) Seats(1AB) Rows or seats in between: 8-9B (in front of seat 9B) 0-1* (in front of row 1) |
| BA | No Seat - Bar | Rows (1*2*) Seats(1AB) Rows or seats in between: 8-9B (in front of seat 9B) 0-1* (in front of row 1) |
| BH | No Seat - Bulkhead | Rows (1*2*) Seats(1AB) Rows or seats in between: 8-9B (in front of seat 9B) 0-1* (in front of row 1) |
| US | USB port available | Rows (1*2*) Seats(1AB) |
| RF | Rear Facing Seat | Rows (1*2*) Seats(1AB) |
| MV | Seat with Movie View | Rows (1*2*) Seats(1AB) |
| XM | Seat without Movie View | Rows (1*2*) Seats(1AB) |
| SR<SSR CODE> | It allows to associate SSRs to individual seats or full rows. The SSR has to be configured in JJSSR table. If the SSR is "chargeable" and has an associated fare, the $ sign will be displayed on the seat map. | Rows (1*2*) Seats(1AB) E.g.: SRSTEX1* |
Options to indicate seats,rows or columns are :
1*13* | Row 1 and whole Row 13 |
|---|---|
A | Column A |
| 8 | Row 8 |
5AB | Seats 5A y 5B |
5AB6* | Seats 5A 5B y whole row 6 |
1*2A10*11A | Whole Rows 1 y 10 , seats2A y 11A |
Features combinations
Some features may be combined in the same seat and others may not be assigned simultaneously.
- BS and RS can not be combined with each other
- LS and VS can not be combined with each other
- BS and RS can be combined with LS and VS
- Last feature that is assigned will be active
- If a feature is removed, the one assigned previously will be displayed
- NR and AI may be combined with LS or VS
- NR and AI will not be displayed if assigned to the same BS or RS seat.
Delete features
Also during creation process (KPRS / SMA) as when retrieving an already created Seat Map (KPRS / SMR), it is possible to delete conditions and features to the different rows and / or seats of the Seat Map in which you are working.
The command to add these features using the same indicators and concepts is the following
KPRS/SMM/<indicator>-<rows/seats>
BK indicator has a different format to delete all RBD restrictions.
KPRS/SMM/BK<rows/seats>/*
Possible Errors
Error | Description |
|---|---|
CHECK ENTRY | Command format entered invalid When saving a seat map for the first time and the KASAT equipment number is missing |
INVALID - CONFIGURATION/REGISTRATION ASSOCIATED | When saving a new Seat Map already associated to an equipment KASAT. |
INVALID - CHECK SEAT MAP | Seat Map indicated does not exist |
NO SEATS AVAILABLE | When indicating aisle or window, the corresponding columns must be indicated one at a time |
NO CHANGES MADE - UPDATE OR IGNORE | When using KPRS/SME entry to save a map without any change. |
INVALID - CHECK EQUIPMENT | When saving a Seat Map for the first time (KPRS / SME / kasat) indicating an incorrect / non-existent equipment id |
CHECK SEATS CHARACTERISTICS | When assigning a feature to a seat / row that already has other characteristics that do not allow simultaneity |
RESTRICTED - FINISH OR IGNORE | While trying to retrieve a Seat Map in a work area where there is already one active - you should save your changes or ignore |
Seat Map Display
· | OCCUPIED |
|---|---|
A | AVAILABLE |
i | AVAILABLE WITH INFANTS |
V | AVAILABLE PREFERRED/PREMIUM SEAT |
L | AVAILABLE EXTRA LEGROOM SEAT |
F | AVAILABLE TO FREQUENT FLYER PASSENGER |
K | AVAILABLE TO OTHER RBD |
B | BLOCKED |
R | RESERVED FOR AIRLINE |
P | PRE-RESERVED SEAT |
/ | RECLINE RESTRICTED |
$ | CHARGEABLE SEAT |
w> | WINDOWS |
» | CORRIDOR |
= | EMERGENCY EXIT |
[ | WINGS |
# | OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP |
x | DISCREPANCY IN CHECK-IN SEATMAP |
| O | AVAILABLE ONLY ADULTS |
| M | AVAILABLE TO WHEELCHAIR |
| U | AVAILABLE TO UNACCOMPANIED MINOR |
| * | MULTIPLE OPERATIONAL CHARACTERISTICS |
| + | MULTIPLE COMMERCIAL CHARACTERISTICS |
| < | REAR-FACING SEAT |
| BAR | BAR |
| BHK | BULKHEAD |
| GAL | GALLEY |
| LAV | LAVATORY |
Possible Combinations
Available Seats (A L V) Combinan con Infantes (i), costo ($), no reclinable (/), no disponibles en Check-In (x) | |
|---|---|
| iA | Available seat for adult with infant |
| L$ | Available Seat with additional space at an extra charge |
| V/ | Available seat with recline limitations or preferences |
| iA$ | Available seat for adult with infant at an additional charge |
| iL/ | Available seat for for adult with infant with recline limitations and extra space. |
| xA | Available seat for pre-assignment non existent in RES Check-in Seat Map. |
Unavailable Seats(F K B R P . #) Combinable with non reclinable seat (/), unavailable for Check-In (x) | |
| K/ | Available seats for passenger in other booking classes and with recline limitations. |
| P/ | Pre-assigned seat with recline limitations |
| x. | Pre-assigned seat non existent in Res Check-in Seat Map |
Command List
Item | Command | Description | Example |
|---|---|---|---|
Modifiers KPRS/SMx | KPRS/SMx
| Possible modifiers for KPRS/SMx | |
| List | KPRS/SM* | Created Seat Maps list | |
| Retrieve | KRPS/SMR/<id Seat Map> | Retrieve Seat Map on screen | KRPS/SMR1 |
| Ignore | KPRS/SMI | Ignore retrieved Seat Map | |
| View | KPRS/SMV | Re-display retrieved Seat Map | |
| Save changes | KPRS/SME | Save changes applied to retrieved Seat Maps | |
| Create | KPRS/SMA#<cabin>/<row from>-<row to><columns/seats> | Create a new Seat Map | KPRS/SMA#Y/1-13ABCDEFGHI |
| Create multi-cabin | KPRS/SMA#<cabin>/<row>-<row><seats>#<cabin>/<row>-<row><seats> | Create a new Seat Map with two cabins | KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF |
| Save creation and associate to KASAT | KPRS/SME/<equipment id KASAT> | Save new Seat Map always associated to a KASAT equipment. KASAT id number will be the Seat Map number You must create as many Seat Maps as equipments in KASAT | KPRS/SME/999 |
| Delete | KPRS/SMD/<Seat Map id> | Delete Seat Map and relationship with KASAT equipment. | KPRS/SMD1 |
| History | KPRS/SMH/<Seat Map id> | Visualize Seat Map history | KPRS/SMH/999 |
Modifiers KPRS/SMM/x | KPRS/SMM/x
| Possible modifiers for KPRS/SMM/x | |
| Window | KPRS/SMM/WN<column> KPRS/SMM/WN-<column> | Indicate window column | KPRS/SMM/WNA KPRS/SMM/WN-A |
| Aisle | KPRS/SMM/AL<first column><second column> KPRS/SMM/AL-<first column><second column> | Indicate aisle column | KPRS/SMM/ALCD KPRS/SMM/AL-CD |
| Wings | KPRS/SMM/WG<row> KPRS/SMM/WG-<row> | Indicate rows over the wings | KPRS/SMM/WG8 KPRS/SMM/WG-8 |
| Exit | KPRS/SMM/EX<row> KPRS/SMM/EX-<row> | Indicate Emergency Exit rows | KPRS/SMM/EX8 KPRS/SMM/EX-8 |
| Infant | KPRS/SMM/AI<rows/seats> KPRS/SMM/AI-<rows/seats> | Indicate rows/seats good for infants | KPRS/SMM/AI1*12H13* KPRS/SMM/AI-12H |
| Reserved | KPRS/SMM/RS<rows/seats> KPRS/SMM/RS-<rows/seats> | Indicate reserved rows/seats | KPRS/SMM/RS3* KPRS/SMM/RS-3* |
| Blocked | KPRS/SMM/BS<rows/seats> KPRS/SMM/BS-<rows/seats> | Indicate blocked rows/seats | KPRS/SMM/BS5AB KPRS/SMM/BS-5A |
| Non Recline | KPRS/SMM/NR<rows/seats> KPRS/SMM/NR-<rows/seats> | Indicate non recline rows/seats | KPRS/SMM/NR3* KPRS/SMM/NR-3D |
| Preferred | KPRS/SMM/VS<rows/seats> KPRS/SMM/VS-<rows/seats> | Indicate Preferred rows/seats (VIP) | KPRS/SMM/VS3* KPRS/SMM/VS-3* |
| Extra Leg | KPRS/SMM/LS<rows/seats> KPRS/SMM/LS-<rows/seats> | Indicate rows/seats with Extra Leg Room | KPRS/SMM/LS3* KPRS/SMM/LS-3* |
| Only Adult | KPRS/SMM/OA<rows/seats> KPRS/SMM/OA-<rows/seats> | Indicate chargeable rows/seats | KPRS/SMM/OA11DEF KPRS/SMM/OA-11E |
| Agency | KPRS/SMM/SHA<rows/seats> KPRS/SMM/SHA-<rows/seats> | Indicate rows/seats available for travel agencies Seat Map Display | KPRS/SMM/SHA1*13* KPRS/SMM/SHA-1*13* |
| RBD | KPRS/SMM/BK<rows>/<RBDs> KPRS/SMM/BK<rows>/* | Indicate rows with RBD restrictions (*indicates all RBDs) | KPRS/SMM/BK1*13*/ABK KPRS/SMM/BK1*13*/* |
KPRS_Check-In
Seat Maps that are used in the check-in module maintain their current operation, and the coexistence between both Seat Maps is synchronous from the moment the flight is initialized at check-in, either automatically or manually.
When assigning seats from the reservation module, a SEAT element with the information corresponding to the preassigned entries is generated in the PNR.
These seats will be informed and selected at the time of check-in.
If at the check-in the seats are modified, the preassigned seats will be released in the Seat Map but the SEAT elements of the PNRs will remain unaltered.
Performance
Seat Maps used for seat pre-assignment in reservations will be created and managed by the airline directly through the Schedule module, with KPRS commands defined in the corresponding instructions.
Seat Maps used for seat allocation at check-in must be requested to KIU for its creation, management and associating with the corresponding registration as it has been up to now.
It is important that in the creation of both Seat Maps the relationship and agreement be maintained according to the equipment to which they will be assigned.
During the period in which the flight allows seat pre-assignment through the reservation module and it is not initialized at check-in, the Seat Maps information, features and pre-assigned seats will be maintained and taken from the pre-assignment module. seats in reservations (KPRS).
Once the flight is available for check-in (initialization of the flight either manual or automatic), both Seat Maps will coexist and will be synchronized automatically, indicating in KPRS the seats assigned in check-in (indicator # in 4G) and in pre-assigned check-in (indicator P in PV).
If the flight is initialized in the Check-In but no registration is assigned , the Seat Map that will be displayed will be the Pre-Assignment one (without considering the Check-in Seat Maps .
When initializing the flight, both Seat Maps begin to coexist. If the flight is de-initialized (PCD), the system will show the pre-assignment Seat map for reservations without considering the previous information of the Check-in Seat Map.
Differences between Seat Maps
From the moment the flight is initialized at check-in,seats that may be offered for pre-assignment will be only those that exist in both Seat Maps in the same cabins.
The seats that are configured in the pre-assignment Seat Map but do not exist in the Check-in Seat Map or exist but in a different cabin, can not be preassigned.
These seats will be shown as occupied (.) In the common display of Seat Map (4G *) and with the discrepancy indicator with the Seat Map of Check-In (x) in the extended display (4G **) and CRC ( VST).
Display a Seat Map
From the Check-In module, Seat Maps can be displayed in the usual way, with PV and PS commands.
PV1998/21JUNCDG C [ [ Y 4 5 6 7 8 9 10 11 12 13 14 15 w> F A A I P A A A A A I A P E A P I A P A A A A I A A » = = D A A A A I A A C A A A A I A A » = = B A A I A A A A A A I A A A A A I I A A A A I I A P w>
In the cryptic Check-in Seat Map references (PV), you can view seats with a P indicator which are the ones that are preassigned from the reservation module.
Those seats are actually occupied in the Check-In by already accepted passengers (with seats preassigned or assigned at check-in), and will be shown with the dot indicator (.).
PS1998/21JUNCDG
.
In the Check-in Seat Map references (PS) you can see in the seats that are preassigned from the reservation module in yellow.
Seats effectively occupied in the Check-In by passengers already accepted (either with preassigned seats or assigned at check-in), will be shown in gray.
Check-in without preassigned seats
Check-in process is done in the usual way. If the passenger does not have a pre-assigned seat, the seat available in the Check-in Seat Map may be assigned.
This seat will be shown as occupied in the Check-in Seat Map and as assigned in the check-in in the Seat Map of pre-assignment (indicator #) and can not be assigned to another passenger in either of the two modules.
Check-In with preassigned seats
When searching for passengers at check-in through the PF command, the preassigned seat data under the SEAT column is included in the response.
Example:
PF1998/21JUNCDGFRA-CDGFRA CHECKIN-M> XX1998 /21JUN CDG ITEM CODE NAME FOID OFF ST CC SEAT FF 1 BIHYPA CDGFRA/ECO PP95934691 FRA HK YW 16C 2 IJOZPH CDGFRA/BUSINESS PP30581850 FRA HK CM 7F 3 RVMWHZ CDGFRA/FIRST PP02390021 FRA HK FF 2A
PF1 CHECKIN-M> XX1998 /21JUN CDG ITEM CODE NAME FOID OFF ST CC SEAT FF 1 BIHYPA CDGFRA/ECO PP95934691 FRA HK YW 16C
If the passenger does not have a preassigned seat, the SEAT field will be shown as blank.
Passenger acceptance on the same seat
If the passenger is effectively confirmed that will be on the the same seat that was preassigned, it will be possible to proceed directly with the passenger's acceptance without indicating the seat in the command and without the display of the Check Map Map Seat.
The system will assume that the preassigned seat is maintained in reservations and will be maintained at check-in.
PF2 CHECKIN-M> XX1998 /21JUN CDG ITEM CODE NAME FOID OFF ST CC SEAT FF 1 IJOZPH CDGFRA/BUSINESS PP30581850 FRA HK CM 7F
PU1 CHECKIN->XX1998/21JUN CDG ORD CODE NAME FOID OFF CC PARTY SEAT BAG 001. IJOZPH CDGFRA/BUSINESS PP30581850 FRA CM 7F 0/000
Passenger acceptance when the same seat is unavailable.
If a passenger has a preassigned seat, and this seat is not available at the time of check-in (due to discrepancies between Seat Maps, for example), the system will display the Check-in graphic Map Seat as if the passenger had no preassigned seat, allowing the check-in agent to proceed with the selection of a new seat.
Example:
PF1999/5JULEZEMAD-CASTE CHECKIN-M> XX1999 /05JUL EZE ITEM CODE NAME FOID OFF ST CC SEAT FF 1 WGLTFQ CASTELLON/DANITZA MR PP 67193097 MAD HK YY 29A 2 ¤ WHITE/BARRY PP 85826068 MAD HK YY 29B
Seats 29A and 29B are not available in the check-in seat map therefore, when carrying out the passenger acceptance command (PU1 or PU1-2), the Check-in seat Map will be displayed and will allow the agent select the new seats.
Acceptance of multiple passengers when some seats are not available
If you proceed to check-in more than one passenger with preassigned seats, and some of the seats do not exist in the Check-in Seat Map , you must proceed to single passengers acceptance.
On the one hand, passengers whose preassigned seats are also used in the Check-In may be accepted.
Separately, passengers who require a change of seat in the Check-In may be accepted.
Passenger Acceptance by changing a seat
When accepting a passenger at check-in, it is possible to assign a different seat to the one that has been preassigned.
For this, you must find the new seat to assign that is available through the different options by displaying the Check-in Seat Maps (PV or PS) and assign a new seat to the passenger by commands at the time of acceptance with the ST indicator <seat>.
Example:
- Passengers with preassigned seats 15A and 15B
PF1999/6JULEZEMAD-DUMA CHECKIN-M> XX1999 /06JUL EZE ITEM CODE NAME FOID OFF ST CC SEAT FF 1 LDJDKW DUMAS/BRICE PP 11005997 MAD HK YY 15A 2 ¤ JIMENEZ/SERGIO MR PP 29638968 MAD HK YY 15B
- Seat Map display with seats available for assignment at Check-In, for new seats selection.
- P indicates seats that are preassigned from reservations and are displayed on the Check-in Seat Map.
PV1999/6JULEZEMAD C [ [ Y 4 5 6 7 8 9 10 11 12 13 14 15 w> F A A I A A A A A A I A A E A A I A A A A A A I A A » = = D A A A A I A A C A A A A I A A » = = B A A I A A A A A A I A P A A A I I A A A A I I A P w>
- Assignment of new seats 12E and 12F for passengers, in the acceptance command (PU) and ST indicator, ST
PU1-2,ST12EF CHECKIN->XX1999/06JUL EZE ORD CODE NAME FOID OFF CC PARTY SEAT BAG 001. LDJDKW DUMAS/BRICE PP 11005997 MAD YY AA2 12E 0/000 002. LDJDKW JIMENEZ/SERGIO MR PP 29638968 MAD YY AA2 12F 0/000
Passenger uncheck
When canceling a passenger Check-In who had a preassigned seat, the system will proceed to release the seat of the pre-assignment module in reservations as well as in the Check-in Seat Map , although in the PNR the SEAT element will remain active.
Possible Errors
SEAT NOT AVAILABLE |
|
|---|---|
CHECK -> <seat><flight><route> |
|
CHECK -> |
|
Release preassigned seats
The release of seats will occur in the following scenarios related to Check-In.
Change of seat at check-in | When accepting a passenger at check-in in a seat different from the preassigned one , the previously reserved seat is released |
|---|---|
| Unchecking a passenger | When unchecking a passenger the previously assigned seat is released. |