Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Boarding
In order to start boarding the accepted passengers on the flight at least one terminal must be assigned to the boarding function. Flight status must be "OPEN" for Boarding.
Use the following entry:
Code Block | ||||
---|---|---|---|---|
| ||||
PBA4580/26JULAEP |
Response
No Formatcode |
---|
ASSIGNED BOARDING -> 4580/26JUL AEP |
Note |
---|
When working on a past date flight (one day after departure date) must replace the date for a "-" sign in order to indicate the system, departure date occurred in the past. |
For example, if departure date had had to be March 6 but actually departed on March 7, use the following format:
Code Block | ||||
---|---|---|---|---|
| ||||
PBA5609-COR |
Una vez asignada la terminal, se procede al embarque. El mismo puede ser individual o masivo. Los comandos son:
Once a terminal is assigned, Boarding process is ready to begin, use the following entry to board passengers, individual or Assign a terminal to begin boarding passengers, entry allows to board passengers individually o massively
Individual:
PB3 |
---|
Massive:
PB3,5,9,12,11,8,15,20 |
---|
Response:
Code Block |
---|
No Format |
8 PAX BOARDED |
Description:
PB | Fixed command |
3 | Check-in sequence number |
Warning |
---|
Use the sequence number for boarding, when boarding multiple passengers, if sequences are co-relative use a "-" to indicate the first and last one. When sequences aren´t co-relative use a "," (comma) to indicate each sequence number you're willing to board on the flight. Se realiza el embarque con el número de orden correspondiente a cada pasajero, si el embarque es masivo y los números son correlativos se puede utilizar el signo – (guión) indicando el primero y el último. Si los números de orden son aleatorios se los separa con la , (coma). Ejemple: PB3,8,56, |
Example:
PB3,8,56,88 |
---|
PB59-78 |
---|
Listado de pasajeros embarcados
En este caso se puede utilizar el mismo listado de pasajeros chequeados, este mismo proporciona en la última columna (BOARD) el indicador de aquellos que fueron embarcadosWarning | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The logic for accepting Adults and infants is the same as for the check in, meaning if the adult was accommodated including a lap infant, La relación entre pasajeros adultos e infantes se mantiene al igual que en el proceso de aceptacon de pasajeros es decir que si un adulto y un infante fueron chequeados juntos al abordarlos el sistema tomara la misma acción embarcando a ambos pasajeros Ejemplo: En el PNR, el PAX BEBE está asociado al PAX RIVAS
No Format | when boarding the adult the lap infant gets also boarded Example On the PNR, the passenger BABY is linked PAX RIVAS
En el check-in acepto al PAX BEBE con el PAX VEGA noformatPassenger BABY was accepted on the same transaction as passenger VEGA
En el boarding se puede embarcar al During boarding process item 1 (adultoadult) o 2 (infante) y automáticamente se sube a los dos PAXInfant) can be boarded and system will automatically board both items.
Utilización del lector del código de barras en ambientes NO CUTE: En caso de utilizar un lector de código de barras para el embarque desde Windows, hay que indicarle esta función al sistema mediante el siguiente comandoUsing bar code reader in NON-CUTE environments: reading from Microsoft Windows use the following entry:
El mismo abre una ventana emergente con los datos del vuelo. Este comando solo se utiliza en aquellos aeropuertos que nos están administrados por plataformas de uso común (CUTE) como SITA, ULTRA o ARINC |
Table of Contents |
---|
This entry will display a pop up including the flight details. This entry is only used at airports where common use platforms (CUTE) such as SITA, ULTA, ARINC are NOT used. |
Table of Contents |
---|
Boarded Passenger List
Display the same list as for passengers accepted on the flight, this displays includes a column called BOARD, and an Indicator (Y) for the passengers that were boarded:
Code Block | ||||
---|---|---|---|---|
| ||||
PLC4580/26JULAEP |
RespuestaResponse:
No Formatcode |
---|
PLC4580/26JULAEP ** PASSENGERS CHECKED ** FLT: 4580 BRD: AEP WED 26JUL06 STATUS CHECK IN: OPEN BOARDING: OPEN PAXS: 24 ORD NAME SEAT BK OFF CODE BOARD 002. ZAOMON/A B COR CYPNSD Y 004. MENDEZ/JUAN Y COR VODDNB 005. DELAVEGA/DIEGO *CHD Y COR TQEJEW Y 006. DELAVEGA/MARTIN *CHD Y COR TQEJEW Y 007. LOPILO/A Y COR OFYEZM 008. LOPILO/S Y COR OFYEZM 009. LOPILO/D Y COR OFYEZM 011. JUNES/S 5C Y COR SUWDMD 012. YANEZ/ALVARO 3A Y COR BHZTLV Y 013. BELISCCI/ANTONELLA B COR NCMVAA Y 014. BASUALDO/MARCOS Y COR AJYVVN Y 015. BASUALDO/GABRIEL Y COR ESMGZC 016. BASILE/ALFREDO B COR ORIKJU 017. BRITOS/SERGIO Y COR TVFSTJ Y 018. SEMINARA/EZEQUIEL Y COR SADHHF Y (SEMINARA/RACO) 019. SEMINARA/RACO *INF Y COR SADHHF Y (SEMINARA/EZEQUIEL) 020. SEMINARA/FRANCO *CHD Y COR SADHHF Y 021. CHUBIEK/BARBARA Y COR SADHHF Y (SEMINARA/MIA) 022. SEMINARA/MIA *INF Y COR SADHHF Y (CHUBIEK/BARBARA) 023. TRASZO/A Y COR KGLICK Y (TRASN/A) 024. TRASN/A *INF Y COR KGLICK Y (TRASZO/A) 025. RACEDO/CARLOS Y COR WYFUGR Y (MILKSAWER/GIN) 026. MILKSAWER/GIN *INF Y COR WYFUGR Y (RACEDO/CARLOS) 027. MILES/ANA *CHD Y COR WYFUGR Y |
En la columna BOARD se observará una Y (Yes) si el pasajero ya ha sido embarcado al vuelo.
Listado de pasajeros pendientes de embarque
Se puede generar un listado de pasajeros chequeados pendientes de embarcar, y además proporciona un listado de los números de orden no utilizados o anulados por el sistema.
Para conocer quiénes y cuantos pasajeros faltan embarcar se dispone del comando:
Code Block | ||||
---|---|---|---|---|
| ||||
PBP4580/26JULAEP |
Respuesta:
noformatColumn BOARD will display a "Y" for the passengers that were boarded on the flight
Passenger List for pending for boarding
This list will display the passengers accepted on the flight but not yet boarded, also displays the sequence numbers that where off loaded:
Code Block | ||
---|---|---|
| ||
PBP4580/26JULAEP |
Response:
Code Block |
---|
PBP4580/26JULAEP ** PENDING PASSENGERS BOARDING ** FLT: 4580 BRD: AEP WED 26JUL06 STATUS CHECK IN: OPEN BOARDING: OPEN ORD NAME SEAT BK OFF CODE 028. AJUMEN/LORENA B COR NCMVAA 029. ARAGON/ANA Y COR TQEJEW 030. CAPRIES/A B COR SQTUCI OFF LOAD: 1, 3, 10 |
Este listado muestra también el número de secuencia de los pasajeros bajados del check in
This display also included the passengers that were off loaded (OFF LOAD 1,3,10).
Se podrá consultar el listado de los pasajeros pendiente de embarque solicitando que los muestre con los bag tags de los equipajes despachados. Para generar este listado se deberá ingresar el siguiente comandoIn addition, this list can also be customized to display only the bag tag numbers for the passengers pending for boarding:
Code Block | ||||
---|---|---|---|---|
| ||||
PBP4112/BT |
Respuesta
Response:
No Formatcode |
---|
PBP4112/BT ** PENDING PASSENGERS BOARDING ** FLT: 4112 BRD: AEP MON 08SEP08 STATUS CHECK IN: OPEN BOARDING: OPEN ORD NAME SEAT BK OFF CODE BAGTAG 001. GOMEZ/PAULA 1A Y SLA XWMCBH 121212 002. TORRES/PAMELA 3A Y SLA XWMCBH 565656/58 003. FUR/MARIELA 6A Y SLA XWMCBH 45454545/46 |
In order to list passengers still missing at the gate together with their checked luggage and weight, the command is as follows:
Code Block | ||||
---|---|---|---|---|
| ||||
PBP4112/BT+ |
Response:
Code Block |
---|
PBP4112/BT+
** PENDING PASSENGERS BOARDING **
FLT: 4112 BRD: AEP MON 08SEP08
STATUS CHECK IN: OPEN
BOARDING: OPEN
ORD NAME SEAT BK OFF CODE BAGTAG
001. GOMEZ/PAULA 1A Y SLA XWMCBH 1/10 121212
002. TORRES/PAMELA 3A Y SLA XWMCBH 2/50 565656/58
003. FUR/MARIELA 6A Y SLA XWMCBH 2/14 45454545/46
|
Desembarcar Pasajeros
Para desembarcar un pasajero de un vuelo, el comando esYou will see the PCK indicator on PBP with any of the filters (BT or BT+) and it means “web checked-in passenger” as on the example below:
Image Added
Off load passengers
Use this entry to off load a passenger:
Code Block | ||||
---|---|---|---|---|
| ||||
PBD11 |
Description:
PBD |
Fixed command |
11 |
Sequence number |
Response:
1 PAX DEPLANED |
---|
En la respuesta se visualizará la cantidad de pasajeros desembarcados en la transacción ingresada y luego se leerá la leyenda PAX DEPLANED.
Al solicitar nuevamente los listados de pasajeros chequeados/embarcados o pasajeros pendientes de embarque se observará a dicho pasajero en las condiciones correspondientes.
Para aquellos trasnportadores que tengan configurada la opción The system responds with the amount on passengers offloaded followed by the text PAX DEPLAINED.
When displaying again the boarded/accepted passenger list, this passengers will be displayed accordingly
For the carriers that have the option [CWD]CONFIRMATION WHEN DEPLANING PAX en la tabla JJCHK podran optar por la opción de dar una advertencia al agente de aeropuerto al momento de desembarcar pasajero/s. La advertencia incluirá el apellido y nombre del pasajero, código de reserva y Party Reference (si existiera). La advertencia deberá ser aceptada con el indicador /Y
Ejemplo
on the JJCHK table set to YES, will display a warning for the agent displaying the passenger's first and last name, PNR code, and party code ( if applicable), this warning must be acknowledge by adding a /Y
Example:
Code Block |
---|
PBD16-18,1,3,10-12
RE-ENTER THE COMMAND TO DEPLANE THE FOLLOWING PSGRS FROM FLIGHT XX 210/03AUGAEP
1. ALVAREZ GUTIERREZ/DESIREE VANESSA - KYJXDQ [AA3]
3. CADORE/ROBER - KYJXDQ [AA3]
10. TEDESCO/ROSSELLA - EKUSXR [AC3]
11. RODRIGUEZ/JOSE - JKJWPK [AD2]
12. BOLIVAR/CARMEN - JKJWPK [AD2]
16. LOPEZ/PEDRO - NNHGZC
17. PEREZ/A - LSFBBW [AF2]
18. PEREZ/C - LSFBBW [AF2] |
Respuesta
Response:
Code Block |
---|
PBD16-18,1,3,10-12/Y
8 PAX DEPLANED |
Warning |
---|
- El orden del listado es en base al número de boarding pass y en orden ascendente
- En el PH se visualizará el comando con el indicador /Y
- Los pasajeros adultos con infantes relacionados serán desabordados en conjunto ya sea que en el comando se indique el numero de orden del adulto o del infante relacionado
Ejemplo:
|
Example:
Code Block |
---|
PBD2
RE-ENTER THE COMMAND TO DEPLANE THE FOLLOWING PSGRS FROM FLIGHT XX4522/10MARAEP
1. VEGA GOMEZ/DIANA - DLNRDF
2. BEBE/BEBE - DLNRDF
PBD2/Y
2 PAX DEPLANED
PBD1/Y
2 PAX DEPLANED |
- DLNRDF
2. BEBY/BEBY - DLNRDF
PBD2/Y
2 PAX DEPLANED
PBD1/Y
2 PAX DEPLANED |
Denied Boarding
Introduction
When canceling the passenger check-in procedure you may indicate that such cancellation is related to denied boarding.
If the passenger is denied boarding, it must be indicated if the reason was voluntary or involuntary, and if the passenger will be compensated or not.
The denied boarding functionality includes the following scope:
Identification of voluntary confirmed passengers to be denied boarding
List of voluntary passengers to be denied boarding
Cancellation of passengers, confirmed and on the waiting list, adding the feature "denied boarding"
Mass cancellation of confirmed and waitlisted passengers, adding the feature "denied boarding"
Denied boarding passengers list.
Passenger information with denied boarding in the PFS message (Passenger Final Sales)
Passenger records with denied boarding in the flight history
Voluntary denied boarding
During the check-in process , or edition of a passenger already checked, it can be indicated that a passenger is willing to accept denied boarding.
In the same way, it will also be possible to cancel the denied boarding previously assigned to a passenger.
If for operational or commercial reasons, any of the passengers on the flight should be left on the ground, the volunteers can be identified for denied boarding to cancel their check-in or the corresponding action.
Assignment
The indicator to identify a voluntary denied boarding passenger is VDB and can be indicated in the PU and PE command as follows:
Code Block | ||
---|---|---|
| ||
PU<PAX ITEM>,ST<SEAT NBR>,VDB
PE-<SEQ.NBR>,VDB |
Example:
Code Block | ||
---|---|---|
| ||
PU1, ST10A, VDB |
Once the VDB feature has been added to the passenger, it can be seen in the display of the flight history, and in the list of passengers not traveling.
Deletion
The VDB characteristic assigned to the passenger with the VDBN indicator can be deleted as shown below:
Code Block | ||
---|---|---|
| ||
PE-<SEQ.NBR>,VDBN |
Example:
Code Block | ||
---|---|---|
| ||
PE-2, VDBN |
List of voluntary denied boarding passengers
To obtain a list of the passengers who have volunteered for denied boarding, you must request a checked passengers display (PLC) by adding the VDB filter as shown below:
Code Block | ||
---|---|---|
| ||
PLC60/26AUGLHR/VDB |
Code Block | ||
---|---|---|
| ||
PLC60 / 26AUGLHR / VDB
** PASSENGERS CHECKED **
FLT: XX 60 BRD: LHR SUN 26AUG18
FILTER: VOLUNTARY DENIED BOARDING PASSENGERS
STATUS CHECK IN: OPEN
BOARDING: OPEN PAXS: 2
ORD NAME SEAT BK OFF CODE BOARD
001. QUINN / MIKE 10A AND MAD PEYTDQ 002. SMITH / MARIA 12F AND MAD QDJOPF
|
Denied Boarding
Single check-in cancellation
Once a passenger has been accepted, either confirmed or on the waiting list, it is possible to cancel the check-in procedure indicating that it has been denied boarding .
When indicating that a passenger is entitled for denied boarding the following considerations must be identified:
Voluntary or involuntary
Reason for denied boarding
Compensation method
An optional free text
The structure of the command is the following:
Code Block | ||
---|---|---|
| ||
PE- <PAX ITEM>, DEL / <TYPE> / <REASON> / <COMPENSATION> / <ADDITIONAL TEXT> |
Panel |
---|
Indicator Description DV: Denied Voluntary (Volunteer) TYPE DI: Denied Involuntary (Involuntary) It is a mandatory field. The valid options are: OB: Overbooking WR: Weight Restriction (Limitations of weight) REASON CE: Change of Equipment (Change of equipment) IS: Inoperable Seat (inoperative seat) GA: Goverment Action It is a mandatory field. The valid options are: CA: Cash COMPENSATION VC: Voucher NO: Not Apply (No compensation applies) It is a mandatory field. It is a free text that can be included for the purpose of providing extra information. TEXT Accepts up to 50 alphanumeric characters and spaces. It is an optional field. |
Examples:
Code Block | ||
---|---|---|
| ||
PE-1,DEL/DV/OB/CA/OVERBOOKED FLIGHT
PE-2,DEL/DI/WR/VC/DENIED BOARDING DUE TO WEIGHT RESTRICTIONS
PE-3,DEL/DV/GA/NO |
The system response will repeat the previously entered indicators:
PE60 / 26AUGLHRMAD-2, DEL / DV / OB / CA / OVERBOOKED FLIGHT
* * * P A X OFF L O A D * * *
CHECKIN-> XX060 / 26AUG LHR
ORD CODE NAME FOID OFF PARTY SEAT H.BAG BAG
# 002 QDJOPF SMITH / MARIA PP44553 MAD 0/000
** DENIED BOARDING: DV / OB / CA / OVERBOOKED FLIGHT
Command options with API
You can include the API indicator in the command to uncheck a passenger with denied boarding, to also indicate that you want to delete the preloaded API information (Advanced Passenger Information).
Examples:
Code Block | ||
---|---|---|
| ||
PE-1, DEL + API / DV / OB / CA / OVERBOOKED FLIGHT
PE-2, DEL + API / DI / WR / VC / DENIED BOARDING DUE TO WEIGHT RESTRICTIONS PE-3, DEL + API / DV / GA / NO |
Info |
---|
Important notice: Each passenger whose check-in is canceled with the "Denied Boarding" indicator (/ DV or / DI), will be considered in the PLU list as checked-in .(PLU or list of passengers who have not yet done check-in for the flight) This means that it will not be considered as a passenger pending for check-in at the airport. |
Cancellation of mass check-in with denied boarding
When performing a mass check-in cancellation procedure with PEDEL command you can also indicate that it was a denied boarding.
Confirmed passengers
The command structure to massively cancel check-in for confirmed passengers with denied boarding is the following:
Code Block | ||
---|---|---|
| ||
PEDEL<FLIGHT>/<DATE><ORIGIN>/<SEQ.NBR>/<TYPE>/<REASON>/<COMPENSATION>/<ADDTEXT> |
Example:
Code Block | ||
---|---|---|
| ||
PEDEL4178/26AUGAEP/1-4/DV/OB/CA/OVERBOOKED FLIGHT |
Indicators Type, Reason, Compensation and Additional Text apply the same way it applies to single passenger check-in cancellation.
In the "Seq. Number" field, you must indicate the numbers of boarding passes that will be massively unchecked. The options supported by this indicator are:
A single boarding pass number: 1
Several passengers separating with commas: 2,4,16
Selecting passenger ranges: 1-15
Combining options: 2,8,15-20,35
When performing the command the system will require confirmation of the action. To confirm the massive uncheck, the / Y flag must be added at the end of the command to process the transaction:
PEDEL4178/26AUGAEP/1-4/DV/OB/CA/OVERBOOKED FLIGHT
4 PASSENGERS WILL BE OFFLOADED. TO PROCESS ENTER
PEDEL4178/26AUGAEP/1-4/DV/OB/CA/OVERBOOKED FLIGHT/Y
Once the transaction is confirmed, the system will display boarding pass numbers that were unchecked:
PEDEL4178/26AUGAEP/1-4/DV/OB/CA/OVERBOOKED FLIGHT/Y
001 - OFFLOADED OK
002 - OFFLOADED OK
003 - OFFLOADED OK
004 - OFFLOADED OK
Waitlisted Passengers
The structure of the command to mass uncheck waitlisted passengers indicating that their boarding was denied, is as follows:
Code Block | ||
---|---|---|
| ||
PEDELSBY4178/26AUGAEP/1-4/DI/CE/NO |
Indicators Type,Reason,Compensation and Additional Text apply the same way it applies to single passenger check-in cancellation.
In the "Seq. Number" field, you must indicate the numbers of boarding passes that will be massively unchecked. The options supported by this indicator are the same as those for the confirmed passengers.
Considerations
When carrying out a mass passengers uncheck, whether they are confirmed or on the waiting list, the system will not allow executing the same command until the process of unchecking each passenger included in the command has been completed.
If a user enters the mass uncheck command and such transaction is already running in the same terminal, the system will report:
INVALID - IT IS RUNNING THE SAME PROCESS IN THIS DEVICE MIA00XX201
If a user enters the mass uncheck command for a flight and that transaction is already running for the same flight, the system will report:
INVALID - IT IS ALREADY RUNNING THE SAME PROCESS FOR FLIGHT XX5050/26AUGEZE
Denied boarding passengers list
To check the denied boarding passenger list of a particular flight, the following command should be entered
Code Block | ||
---|---|---|
| ||
PLD<FLIGHT>/<DATE><ORIGIN> |
Example:
Code Block | ||
---|---|---|
| ||
PLD5050/26AUGEZE
PLD5050/26AUGEZE |
** DENIED BOARDING PASSENGERS **
FLT: XX5050 BRD: EZE SUN 26AUG18
STATUS CHECK IN: OPEN
BOARDING: OPEN PAXS: 0
ORD NAME TYPE REASON MODE BK OFF CODE
001. BRAYER/MIKE DV OB CA Y MIA VUAFBT #DB REMARK: CASH WAS GIVEN
002. BRAYER/PETER DI WR VC Y MIA VUAFBT
#DB REMARK: VOUCHER DUE TO WEIGHT RESTRICTIONS
003. QUINN/ANNA DV CE CA Y MIA SHJRXV
#DB REMARK: DENIED BOARDING DUE TO CHANGE OF EQUIPMENT
004. SMITH/MARIA DI IS VC Y MIA ELHXQC #DB REMARK: INOPERABLE SEAT PAX RECEIVED VOUCHER
005. CERON/DIANA DV GA NO Y MIA ZBWYYE #DB REMARK: DENIED BOARDING BY GOV AUTHORITIES
006. TRENTO/PABLO DI OB NO Y MIA ZBWYYE #DB REMARK: TRANSFERRED TO ANOTHER AIRLINE
The display will show the following items:
ORD: Order number (Passenger boarding pass number)
NAME: Denied boarding passenger name
TYPE: Voluntary or Involuntary)
REASON: Reason for denied boarding (OB, WR, CE, IS, GA)
MODE: compensation mode (CA, VC, NO)
BK: Booking class
OFF: Destination
CODE: Booking code
Filters
The following filters can be applied to the boarding denied passengers list:
DBT<TYPE>
The list can be filtered by type of denied boarding: DV (Denied Volunteer) or DI (Denied Involuntary)
Only one type can be entered at a time, and the system will validate that they are 2 characters (it will not validate the codes).
Examples:
Code Block | ||
---|---|---|
| ||
PLD5050/26AUGEZE/DBTDV
PLD5050/26AUGEZE/DBTDI |
DBR<REASON>
The list can be filtered by reason or reason for denied boarding: OB, WR, IS, CE, GA.
Only one reason can be entered at a time, and the system will validate 2 to 4 characters (it will not validate the codes).
Examples:
Code Block | ||
---|---|---|
| ||
PLD5050/26AUGEZE/DBROB
PLD5050/26AUGEZE/DBRWR |
DBM<COMPENSATION METHOD>
The list can be filtered according to the method used to compensate the passenger: CA, VC, NO.
Only one method at a time can be entered and the system will validate 2 characters( It will not validate the codes.)
Examples:
Code Block | ||
---|---|---|
| ||
PLD5050/26AUGEZE/DBMCA
PLD5050/26AUGEZE/DBMVC
PLD5050/26AUGEZE/DBMNO |
Filters combination
Different type of filters can be combined such as Type,Reason and compensation method
Example:
Code Block | ||
---|---|---|
| ||
PLD5050/26AUGEZE/DBTDV/DBROB/DBMCA |
In the previous example, the system will display a list of passengers with voluntary denied boarding overselling reasons and that were compensated with cash.
The following extensions may also be applied to the PLD list:
/ET: Electronic Ticket
/F: Form of ID
/FF: Frequent Flyer Number /MS: Messages
/BT: Bagtag information
/CT: Category
#N: Alphabetical order
/CY: By cabin Example:
PLD5050/26AUGEZE/DBTDV/ET/F/DBROB/DBMCA/BT
** DENIED BOARDING PASSENGERS **
FLT: XX5050 BRD: EZE SUN 26AUG18
FILTER BY TYPE: DV
FILTER BY REASON: OB FILTER BY MODE: CA
STATUS CHECK IN: OPEN
BOARDING: OPEN PAXS: 0
ORD NAME TYPE REASON MODE BK OFF CODE
FOID E-TICKET NUMBER H.BAG BAGGAGE
001. BRAYER/MIKE DV OB CA Y MIA VUAFBT
NI74125 9990210015285/1 0 0/0 #DB REMARK: CASH WAS GIVEN #BT:
Considerations
The PLD list will only show those passengers who were confirmed and then denied boarding. If the passenger was on the waiting list, and then the check-in was canceled, and boarding denied, it will not appear on this list.
The system does not validate either the type, mode, nor the reason. If non-existing codes are entered, the system will respond without data to the list.
The PLD list will be available before and after the final closing of the flight (PD command).
PFS (Passenger Final Sales)
Passengers with denied boarding will be identified in the PFS message that is generated at the time of flight closure (Check-in PD command).
The new indicators that will be displayed along with the .DBC / element of the message are the following:
OFFLK
Includes those passengers who were checked on the flight and then were canceled from the check-in with the DV or DI indicators.
OFFLN
Includes those passengers who were checked on the flight and then were canceled from the check-in with the DV or DI indicators and that were Go Show.
Flight history
In the flight history (PH command), it will be recorded if the passengers had their boarding denied as shown below:
Code Block | ||
---|---|---|
| ||
PH5050/26AUGEZE |
** HISTORY **
FLT: XX5050 BRD: EZE SUN 26AUG18
...
PE #001 DEL * DV/OB/CA/CASH WAS GIVEN
AEPXX-JF 0215 27AUG18
PE #002 DEL * DI/WR/VC/VOUCHER DUE TO WEIGHT RESTRICTIONS
AEPXX-JF 0216 27AUG18
PE #003 DEL * DV/CE/CA/DENIED BOARDING DUE TO CHANGE OF EQUIPMENT
AEPXX-JF 0216 27AUG18
PE #004 DEL * DI/IS/VC/INOPERABLE SEAT PAX RECEIVED VOUCHER
AEPXX-JF 0217 27AUG18
PE #005 DEL * DV/GA/NO/DENIED BOARDING BY GOV AUTHORITIES AEPXX-JF 0218 27AUG18
PE #006 DEL * DI/OB/NO/TRANSFERRED TO ANOTHER AIRLINE AEPXX-JF 0219 27AUG18
SSR in reservation
At the moment of closing the flight (PD command), the system will automatically add an OTHS SSR in the reservation of those passengers who had their boarding denied, informing the text DENIED BOARDING followed by the flight / date and name of the passenger, as shown below:
SSR
1 OTHS XX DENIED BOARDING XX4112/27AUGAEP-1BARBERO/LISA