System response in all cases will be a list of the passengers with their check-in order boarding number, name, seat, class, locator and booking class. Below each name you can see the SSR booked for that passenger.

Passengers must have at least one confirmed SSR to be included in the list
Only this This list can be viewed displayed only before the total closure of the flight flight is under final closeout (PD).
If the flight has more than one leg, the closing of all its legs is required so that the information stops being displayed.The command supports flight origin and origin/destination (list can be displayed until the flight is closeout at the last airport
This entry can be displayed by boarding airport (MVD) or by flight route(MVDBRC) in case the flight has more than one leg and the information of the leg in question is required)

Accepted passenger list displayed by Inbound/Outbound Connections

...

The Entries entries PLI and PLO display, as a list, all passengers accepted on the flight having inbound connections(PLI) or Outbound connections (PLO).

...

Inbound passenger list display

...

In order The entry to check display the list of incoming passengers on for a flight, the following Comma separator should be entered:

...

Note

On the flight XX16/23OCT operating the route ROS to COR, there are 13 passengers accepted (including INF) and 6 will continue to connect to flight XX17/23OCT from COR to NQN according to their itinerary, and other two will connect to flight XX8000/23OCT from COR to MDZ (excluding INF)

If no passengers includes an Outbound there is not any passenger with an outbound connection on its itinerary , the system responds response is NO DATA

...

Possible error messages

INVALID FLIGHT

Error on the Check flight number, date, or board point or the check if flight 's is already closed (PD)

Extensions

...

Code Block

PLO16/4NOVROS/BT
FLT:  16 ROS      THU 04NOV10   1D

 OUTBOUNDS FLIGHTS               OFF CL CODE   ST    NAME               BAGTAG

 XX017  04NOV CORNQN 09:45    1. COR Y  DMMNDP HK/HK BALBUENA/ROBERTO   12345
                              2. COR Y  NLNDNX HK/HK BETANCOURT/CH      12/6/7
                              3. COR Y  DMMNDP HK/HK DIAZ/OSCAR
                              4. COR Y  SDIZPZ HK/HK ESTABA/ALBERTO
                              5. COR Y  UJBJMC HK/HK GOMEZ/MIGUEL       23/234
                              6. COR Y  NGSJPU HK/HK LOPEZ/A  (CHD)
                              7. COR Y  NGSJPU HK/HK LOPEZ/B

                                 TOTAL CONNECTING:  7

                                 TOTAL CHECKED IN: 10

To display the amount pieces and number of pieces of baggage, their weight and the tag numbers add , use the extension /BT+ as shown below

Code Block

language	xml

PLI{flight}/{date}{Board Point}/BT+

,

Code Block

language	xml

PLO{flight}/{date}{Board Point}/BT+

...

Passenger weight is displayed as followingfollows:

TOTAL PAX WEIGHT ADT M: includes the weight for all accepted male passenger

...

TOTAL PAX WEIGHT CHD: includes the weight for all accepted Child child passenger

TOTAL PAX WEIGHT INF: includes the weight for all accepted infant passenger

...

PLC	Displays all passenger accepted on a flight
LD	Displays all passenger Reserved booked on a flight
PLI	Displays all passenger accepted on a flight whose itinerary includes and Inbound Connection with an inbound connection
LI	Displays all passenger Reserved reserved on a flight whose itinerary includes and Inbound Connection with an inbound connection
PLO	Displays Displays all passenger accepted on a flight whose itinerary includes and Outbound Connection with an outbound connection
LO	Displays all passenger Reserved on a flight whose itinerary includes and Outbound Connection with an outbound connection

Accepted passenger list with inbound connections (Version 2)

...

Those carriers using Version 2, of checkCarriers using Check-in version 2 will be able to access connecting passenger information list using the following extensions.display the list of passengers with either inbound or outbound connections as shown below:

Passenger information will be detailed with inbound and outbound connecting flight information , ( flight numbers, class of service, day date, date of the week, date, board point, off pint, departure and arrival time. extensión que incluye el itinerario inbound inmediatamente anterior. inbound route, STD and STA)

Inbound Connection:

Code Block

language	xml

PLC4444/15OCT/I

...

The Outbound flight information will display the indicator *CHECKED* to indicate that the passenger was accepted on the connecting flightsflight. The This indicator will generate only if passeger gets not appear when the passenger was not accepted on the outblund flights connecting flight.

Example:

PLC38/29SEPUSH/O

Code Block

** PASSENGERS CHECKED **
FLT:  666    BRD: COR    TUE 18AUG15
                     
STATUS    CHECK IN: OPEN      
          BOARDING: OPEN         PAXS:  11

 ORD    NAME                                 SEAT BK OFF CODE   BOARD
	
 007. o CANDELA PINA/HENLIAN+                  7A Y  AEP QPUYBM
      .O/ XX4420Y 18AUG TU AEPMDQ 1810 1855 *CHECKED* .

...

The indicator #S means BY SEAT

If for whatever reason there are passengers accepted with no seat number assigned, or passenger is Infant, system will display them on top.Passengers checked under a Free-Seating policy will be listed at the top of the list together with infants checked because any of them have a seat number assigned. If flight is fully checked using free-seating” ,then all passengers will be listed in order according to their BN

Passengers accommodated on a Jump Seat seat (JMP) will display be listed at the bottom

The list displays is displayed by ascending order.

...

List of accepted passenger

...

without

...

baggage

...

Use this entry to display all passengers accepted on the flight who did not check baggage in

...

This entry will generate a file and system responds will respond with a link to the file location on the PCcomputer. Click on the link to open the EXCEL file.

Considerations:

Passenger List list may be exported adding any of the list filters available.
Exporting will only be available if flight status is open, once flight is close, the system responds will respond with the following error message.

Code Block
NONOT PERMITIDOALLOWED - VUELO CERRADO NOT ALLOWED - FLIGHT CLOSEDFLIGHT CLOSED

Exporting PLC to a

...

FTP/Mail server

...

This entry permits allows to send the PQTV file including fields like: Y-Boarded or N-Not Boarded, seats , sequence number for check-in.and boarding number

Code Block
PLC4500/21JUN-SEND

Transit

...

passengers list

...

This list permits to displays all the trough passengers by flight segment. This list includes passengers whose itinerary includes a flight with two ore my flight segments. Excecute the entry from the intermediate board points in order to display the passengers transiting. transit passengers on a multisector or multileg flight. The input is as shown below:

For example, flight route is AEP/MDQ/MJR/BHI, and entry is executed from MDQ:

...

PLT	Fixed entry
4330	Flight number
/	Slash
29APR	Date
MDQ	Board Point

Of flight is the same date is the current date, date does not need to be specified on the entry:The command does not require to enter a date when flight is operating on current date.

Example:

Code Block

PLT4330MDQ 
** TRANSIT PASSENGERS** 
FLT: 4330 CNX: MDQ TUE 29APR14

STATUS CHECK IN: OPEN 
       BOARDING: OPEN 

      ORD  NAME                 SEAT BK  CODE     BOARD 
AEPMJR                    PAX 4 
      009. MADRIZ/IVAN JOSE       7B Y   EVYMSP    Y 
      010. NYBYF/ZIAHJ            7C Y   EVYMSP    Y 
      011. WATRHYHXN/TDMUAI       6C Y   EVYMSP    Y 
      012. BVEDT/RIFH             6B Y   EVYMSP 
AEPBHI                    PAX 5 
      004. QYPGAG/EUGENE         11A Y   WKIKKQ    Y 
      005. KYGAVACBK/ALTIN       11B Y   WKIKKQ    Y 
      006. AZUNOIS/KYPRINIS      11C Y   WKIKKQ 
      007. VINKUW/ZRHOUN         10B Y   WKIKKQ 
      008. GVISDYR/IDNIC MRS     10C Y   WKIKKQ 

TOTAL TTL PAX 9

...

Export to EXCEL is also supported

Passenger list pending acceptance

...

List for passengers pending to check-in

...

PLU list includes passengers reserved on the flight but not yet checked-in by using the following entry.

Code Block

language	xml

PLU{flight}/{date}

...

To display a list for other station, add the board point after the departure date. i.e. PLU4420/01JULAEP

Passenger list pending acceptance with

...

filters

...

In order to retrieve a passenger list with pending acceptance but applying a filter for inbound or outbound connections you can use the following commandPLU also allows the retrieval for all passengers pending to be check-in with an inbound connection:

Code Block

language	xml

PLU<FLIGHT>/<DATE><ATO>/I

...

Displays It also lists all passengers pending to be checked-in and with inbound connectionswith an outbound connection

Code Block

language	xml

PLU<FLIGHT>/<DATE><ATO>/O

...

Displays A PLU list displaying passengers pending to be checked-in and with outbound connectionswith either an inbound or an outbound connection

Code Block

language	xml

PLU<FLIGHT>/<DATE><ATO>/IO

Displays passengers pending to be checked-in and with both inbound and outbound connections

Example:

PLU41/3OCTTUC/IO
** NON CHECKED PASSENGERS **
FLT: XX 41 BRD: TUC TUE 03OCT17

...

This entry generates a list including all passengers checked-in or boarded filtering by the agent sign/user name who accepted the passenger on the flight.
Add /US filter by sign/user name

/US as extension to PLC:

System displays the PLC information and adds the column AGENT ID, with the agent sign information of passengers accepted by agent ID.

/US is the filter for the PLC entry:

PLC displays a new column with the AGENT ID

Code Block
PLC<FLIGHT>/<DATE><Brd Point>/US

...

Code Block

** PASSENGERS CHECKED **
FLT: 4420    BRD: AEP    WED 23DEC15
                    
STATUS    CHECK IN: OPEN     
          BOARDING: OPEN         PAXS:  12

 ORD    NAME                                 SEAT BK OFF CODE   BOARD  AGENT ID
 001.   GUILARTE/OSWALDO                       3B B  MDQ KLXIEH        KIUHELPJF
 002.   ALSINA ROYO/JOSE LUI+                  3C B  MDQ KLXIEH        KIUHELPJF
 003.   TST/A                                 11A Y  MDQ VPLOBP        KIUHELPJF
 005.   CAMACHO/VALENTINA MA+                 11C Y  MDQ VPLOBP        KIUHELPJF
 006.   CARABALLERO GALVEZ/O+                  8A Y  BRC ZPRKLC        AEP00XXCK
 007.   CARRILLO/JUAN                          8B Y  BRC ZPRKLC        AEP00XXCK
 008.   TEST/ADTOTRO                           5B B  BRC FYELQU        AEP00XXCK
 009.   PACHECO/GILMA                          5C B  BRC FYELQU        AEP00XXCK
 010.   PEREZ/JUAN MR CARLOS                   9C B  MDQ KLXIEH        AEP00XXJM
 011.   SMITH/ADAM MR                         JMP B  BRC FYELQU        AEP00XXJM
 012.   CABEZAS/ANA SOFIA                     10A B  BRC FYELQU        AEP00XXJM
 013.   CAMACHO/VALENTINA MA+                  6A Y  BRC ZPRKLC        AEP00XXJM

Warning
The /US

...

System displays the PLC details only for those passenger accepted by the specified agent sign.

Code Block

language	xml

PLC<FLIGHT>/<DATE><ATO>/US<AGENT ID>

Example:

PLC4420/23DECAEP/USAEP00XXJM

Code Block

** PASSENGERS CHECKED **
FLT: 4420    BRD: AEP    WED 23DEC15
                    
STATUS    CHECK IN: OPEN     
          BOARDING: OPEN         PAXS:  12

FILTER BY USER

 ORD    NAME                                 SEAT BK OFF CODE   BOARD  AGENT ID
 010.   PEREZ/JUAN MR CARLOS                   9C B  MDQ KLXIEH        AEP00XXJM
 011.   SMITH/ADAM MR                         JMP B  BRC FYELQU        AEP00XXJM
 012.   CABEZAS/ANA SOFIA                     10A B  BRC FYELQU        AEP00XXJM
 013.   CAMACHO/VALENTINA MA+                  6A Y  BRC ZPRKLC

Warning

The /US indicator is combinable with other indicator from the PLC
PLC can be exported including the /US indicator
Under the column AGENT ID, displays the agent sign corresponding to the field NEW USER ID displays on the entry HB*
When filtering the list by entering an AGENT ID, system only verifies ID enteres is 9 characters. If User does not exist or format is incorrect system responds there are no records for the ID entered
The PLC always displays the agent ID who performed the PU entry (There are no displays for agents who edited or offloaded passengers)

...

filter can be combined with other filters on the PLC
PLC can be exported including the /US indicator
Under the column AGENT ID, the agent information is the one shown in the field NEW USER ID when transmitting the HB* command
When filtering by AGENT ID, the system will only verify if the entered ID had 9 characters but if user does not exist or the ID format was incorrect, the response will be NO RECORDS for the entered ID
Agent ID for a PU command will be always shown on the PLC but not if the agent edited or offloaded a passengerd record

The following entry displays the total number of passengers checked-in by agent:

Code Block
PLA{flight}/{date}{airport}

Example:

PLA4420/04AUGAEP

System respondsresponse:

Code Block

language	xml

PLA4420/04AUGAEP
FLT:   49    BRD:MVD    TUE 29SEP15
USER      NAME                 CHECKED   BOARDED  DELETED DEPLANED REPRINTED_BP REPRINTED_BT
KIUHELPGL PERES/JOHN               2         2                 2            1           5
KIUHELPAC CONTRERA/ANA                       1                 1            1

The list includes the user ID, last name and name for each of the agents who participated on he check-in process accepted passengers on the flight

CHECKED:	Amount of passenger checked-in by the Agent
BOARDED:	Amount of passenger boarded by the Agent
DELETED:	Amount of passenger canceled by the Agent
DEPLANED:	Amount of passenger deplained by the Agent
REPRINTED_BP:	Amount of reprinted boarding passes by the Agent
REPRINTED_BT:	Amount of reprinted bag tags by the Agent ( System counts the amount of entries and not the tag itself)

Amount of passenger checked-in by the Agent

...

List for accepted passengers needing manual reacommodation

...

This list will display all passengers that were accommodated and after change of registration could not be automatic re-accommodated by using the following entryneeding to be reaccommodated manually after an aircraft registration change:

Code Block
ORD NAME SEAT BK OFF CODE BOARD 001. FRATTIN/JUAN 2A Y MDQ OAKFIJ 002. MERLINI/MARIANO ?9A Y MDQ XDVYXZ

This list is cleared once the passenger is manually accomodated reaccomodated by using the passenger edit command PE-2,ST

...

Versions Compared

Old Version 13

New Version 14

Key

Accepted passenger list displayed by Inbound/Outbound Connections

Inbound passenger list display

Possible error messages

Extensions

Inbound Connection:

List of accepted passenger

without

baggage

Exporting PLC to a

FTP/Mail server

Transit

passengers list

Passenger list pending acceptance

List for passengers pending to check-in

Passenger list pending acceptance with

filters

List for accepted passengers needing manual reacommodation

Page Comparison

Versions Compared

Old Version 13

New Version 14

Key

Accepted passenger list displayed by Inbound/Outbound Connections

Inbound passenger list display

Possible error messages

Extensions

Inbound Connection:

List of accepted passenger

without

baggage

Exporting PLC to a

FTP/Mail server

Transit

passengers list

Passenger list pending acceptance

List for passengers pending to check-in

Passenger list pending acceptance with

filters

List for accepted passengers needing manual reacommodation