From this module you can manage the seat map assigned to a flight at check-in.

Block or reserve seats

Use the following entry to display the seat map

Code Block

language	xml
theme	FadeToGrey

PCflight nbr / FECHA ORIGEN,SMP

(Graphic mode allow the seat map management, to block or reserve seats)

To block o reserve seats select from the drop down menu, click on the seat to select, then click Apply. Click OK to exit.

To unblock repeat the same entry, right-click to selected seat, choose an option from the drop-down menu then click apply and OK to exit

back to top

Panel

borderColor	gris
bgColor	gris

Table of Contents

outline	true
class	fixedPosition

Managing the seat map by using entries

The functions to block, unblock, and the option to allow lap infants can be edited using entries instead of displaying the graphic seat map

Reserve Seats

Use the following options to reserve a seat

PC<flight nbr>,SMP/R+<seat number>

Reserves the selected seat number and keeps the previously reserved seats.

Example: PC4444,SMP/R+6A

Use the options below to reserve seat / rows

9A	Reserves seat 9A
7AC	Reserves seats 7A and 7C
10*	Reserves the whole row 10
1214	Reserves rows 12 and 14
*86A**	Reserves row 8 and seat 6A

PC<flight nbr>,SMP/R<seat number >

Reserves seat number 6A and unblocks all the previously reserved seats.

Example: PC4444,SMP/R8C

PC<flight nbr>,SMP/R-<seat number >

Removes the selected seat but keeps all the previously reserved seats on the list. Same logic to reserve seat/rows apply for unblocking.

Example: PC4444,SMP/R-12B

PC<flight nbr>,SMP/R

Deletes and unblock all the reserved seats

Note
Indicator SSM (Screen Seat Map) can replace SMP on any of the entries described on top to display a seat map

back to top

Block Seats

Use the following options to block a seat on the seat map.

PC<flight nbr>,SMP/B+<seat number >

Blocks the selected seat number and keeps the previously block seats.

Example: PC4444,SMP/B+6A

Use the following options to block a seat or row.

9A	Blocks the seat 9A
7AC	Blocks the seats 7A y 7C
10*	Blocks the whole row 10
1214	Blocks rows 12 and 14
*86A**	Blocks row 8 and seat 6A

PC<flight nbr>,SMP/B<seat number>

Block seat 6A and unblocks all the previously reserved seats

Example: PC4444,SMP/B8C

PC<flight nbr>,SMP/B-<seat number>

To unblock a specific seat and keeping the previously blocked seat. Same logic to block seat/rows apply for unblocking.

Example: PC4444,SMP/R-12B

PC<flight nbr>,SMP/B

Unblock and release all seats.

Note
Indicator SSM (Screen Seat Map) can replace SMP on any of the entries described on top to display a seat map

back to top

Lap Infant indicator

To indicate that infants are accepted in a seat in the seat map, the following command can be entered:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I2A

Description

PC3172/07FEBAEP,	Mandatory to indicate flight number, departing date and boar point
SMP	Indicador del seat map. También puede indicarse SSM (Screen Seat Map).
/	Slash
I	Indicator to accept lap infants
2A	Seat number accepting lap infant

Choose from the following options when editing a seat or row to accept lap infants

9A	Configures seat 9A
7AC	Configures seats 7A y 7C
10*	Configures row 10
1214	Configures row 12 and 14
*86A**	Configures row 8 and seat 6A

An I displaying on the center of the seat will indicate seat allows lap infants

Example:

Seats 3ABC allow lap infants and seat 2ABC do not

back to top

Delete lap Infant indicator

Use the following entry to delete te allow lap infant indicator from the seat map:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I-2A

Description:

Use the same entries as the ones described to add the lap infant indicator to remove it by adding a - sign before the seat number

Same logic to add indicator to seat/rows apply for removing the indicator.

Use the following entry to remove the the lap infant indicator for all the seats on the seat map

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I

This entry will delete all the indicators for lap infant previously added to the seat map

back to top

Managing the seat map from the control panel (version 2)

Introducción

Special feature configurations can be managed at check-in seat maps assigned to a flight. You can set special features for each seat at the time of check-in from the Flight Control Panel (PC)

Description

In order to manage the different characteristics that can be configured in the check-in seat map there are 2 types of versions.
Version 1 is the one distributed on all airlines and is the one that comes by default
Version 2 includes the possibility of configuring new special features, allowing them to the same seat and also includes equipment with 2 floors (upper and main deck)
The new multiple features that are included in version 2,configured to the same seat and the rows that identify the aircraft floor (upper and main deck) are not available to be displayed in the graphic mode, they can only be displayed in command mode. In any case, if version 2 is activated, the graph containing the characteristics of version 1 can be displayed.

Activate version type:

The version to be used by the airline is configurable and the airline must request it to KIU Support for activation.

Soported Features

This version incorporates the possibility of assigning and displaying multiple characteristics to the same seat and allows managing new characteristics that are not in force in version 1 (seats that have an electricity charger, seats that allow assigning people in wheelchairs, seats that allow seating unaccompanied minors)
In the seats that are in the rows configured in the upper deck, special and multiple characteristics can also be configured (in the same way that it is configured in the main deck)
This configuration allows managing the map of seats that contain multiple characteristics in the same seat (both operational and commercial) and also incorporates the possibility of configuring/viewing seats that allow passengers with reduced mobility (wheelchair) and unaccompanied minor (unaccompanied minor).
These new features are only displayed in the drop-down seat map in the PV and PC, that is, they are not displayed in the graphic that is displayed at the time of check-in or when requesting the PS.
The special characteristics that can be associated (both for the upper deck and for the main deck) to the seats are the following:

Descripton	Configuration Code	Seat Map Code
Blocked	BS	B
AC Power	AC	E
Infant	AI	i
Available for wheel chairs	WC	M
Reserved for the airline (so it won't be sold)	RS	R
Available for unaccompanied minor	UM	U

Configurate features to seats

Special features can be set for each seat

The entry to configure the special features for each seat from the Control Panel is:

PC<flight>/<date><origin>,SMP//<indicator><+><seat number/row/column>

Where:

Indicator: it is the configuration code of the special feature to be configured (according to the table previously described)
Seat: it is the identification of the row and/or column of the seat to be configured, depending on the characteristic to be configured, the row or column must be identified instead of the seat number.
+: Configures the indicated seat and keeps reserved the other seats that were previously reserved.
- If the "+" is not specified, it reconfigures the reserved seats and releases those that were previously configured

Example:

Code Block

language	vb
theme	FadeToGrey

PC4444/10MARAEP,SMP//AI10F

Description:

PC	Mandatory to indicate Control Panel configurations
4444	flight number
/	Slash
10MAR	Departure date
AEP	Origin
,	comma
SM	Seat map indicator
P	indicator to modify the map
//	doble Slash ( used to identify version 2)
AI	code to configurate, in this case AI (infant indicator)
10F	seat to which the characteristic is assigned (row 10 / column F)

Configuration options for more than one seat/full row/full column

9A	Reserve seat 9A
7AC	Reserve seats 7A and 7C
10*	Reserve the entire row 10
1214	Reserve the entire row 12 and 14
*86A**	Reserve the entire row 8 and seat 6A

Delete previously configured features

If you want to delete the configuration of a seat feature, you must enter the command as follows, with the negative symbol in front of the seat number, the same variants can be applied as for reserving seats / rows.

PC<flight>/<date><origin>,SMP//<indicator><-><seat number/row/column>

Example:

Code Block

language	xml
theme	FadeToGrey

PC4444/10MARAEP,SMP//AI-10F

Option to remove and release all seats blocked:

PC<flight>,SMP//BS

Option to delete and release all reserved seats:

PC<flight>,SMP//RS

Delete a configuration:

To delete the configuration of a seat that allows the acceptance of infants in the seat map the following command can be entered:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP//AI-2A

Description:

The fields are the same as those previously described with the difference that the minus symbol before the seat configured with the letter “I”.

The same variants can be applied as for setting up seats/rows.

To eliminate the configuration of all the seats in the seat map with the indicator “i”, the command is:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP//AI

This command eliminates all the seats with the indicator “I” that are configured in the seat map. seating.

Viewing the seat map

You can enter the following command to view the changes made so far, with the following command:

Option to display at the bottom the texts of the references indicating the meaning of the indicators:

PV<flight>/<date><origin><destination>

Option so that the texts of the references indicating the meaning of the indicators are not displayed at the bottom:

PV<flight>/<date><origin><destination>*

Example without displaying the text of reference:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS

Response:

No Format

PV4444/20FEBROS
     Y                                                                                                                  
     5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   
w>
F    A    A    A    A    A    A    A   iA E  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                      
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    U    A    A    A    A    A    A    A   
B    A    A    A    A    A    A    R    A    A    U    A    A    A    A    A    U    A    A    A    A    A    A    A   
A    A    A    A    A    M    M    A    A    A    U    A$   A    A    A    A    U    A    A    A    A    A    A    A$

Example displaying the text of reference at the bottom:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS*

Response:

No Format

PV4444/20FEBROS
     Y                                                                                                                  
     5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   
w>
F    A    A    A    A    A    A    A   iA E  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                      
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    U    A    A    A    A    A    A    A   
B    A    A    A    A    A    A    R    A    A    U    A    A    A    A    A    U    A    A    A    A    A    A    A   
A    A    A    A    A    M    M    A    A    A    U    A$   A    A    A    A    U    A    A    A    A    A    A    A$  


SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  E           AVAILABLE WITH AC POWER
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  L           AVAILABLE EXTRA LEGROOM SEAT
  M           AVAILABLE TO WHEELCHAIR
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  U           AVAILABLE TO UNACCOMPANIED MINOR
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  *           MULTIPLE OPERATIONAL CHARACTERISTICS
  +           AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Visualization of multiple characteristics of a seat

The alternative of visualization of all the characteristics is incorporated as configured in the same seat.

Seats that have multiple features can be identified on the map display with a "+" sign for the commercial features that seat has, and a "*" sign when it has multiple operational features.

To display the multiple characteristics that a particular seat contains, the format is as follows:

PV<flight>/<date><origin><destination>/ST<seat number>

Example:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS/ST10A

Response:

No Format
PV4444/20FEBROS/ST10A SEAT 10A CHARACTERISTICS ROUTE: ROS/AEP i - ALLOW INFANTS * M - WHEELCHAIR U - UNACCOMPANIED MINOR E - AC POWER

Introducción

En este capítulo se explica la metodología para la asignación de las características especiales de los asientos en los mapas de los equipos a través del OAC; teniendo en cuenta que la activación de la aerolínea para la administración de los mapas de asientos es la versión 1

Descripción

Se pueden establecer características especiales para cada asiento y que queden definidos con esta característica en el mapa de asientos asociado a una configuración
Dependiendo el tipo de activación que posea la aerolínea existen 2 tipos de configuración en la administración y visualización de los mapas de asientos.
En este capítulo se describe la metodología para la asignación de las características con la versión 1 activada

Activación del tipo de versión:

La versión a utilizar por la línea aérea es configurable por cliente y debe ser requerido a Soporte para su configuración

Características soportadas por la versión 1

Es la versión actual (default de todas las líneas aéreas)

Las características que pueden asociarse a los asientos son:

DescripciónCódigo configuraciónCódigo visualización en el mapaBloqueadoBBInfanteIIOtros

Configuration of characteristics in the equipment seat map (with version 1)

Introduction

This chapter explains the methodology for assigning the special characteristics of the seats in the team's maps through the OAC; taking into account that the activation of the airline for the administration of seat maps is version 1

Description

Special characteristics can be established for each seat and they are defined with this characteristic in the seat map associated with a configuration
Depending on the type of activation that the airline has, there are 2 types of configuration in the administration and display of seat maps.
This chapter describes the methodology for assigning features with version 1 activated Version
Activation by type:
- The version to be used by the airline is configurable by the customer and must be requested from Support for its configuration

Features supported by version 1

This is the current version (default for all airlines)

The features that can be associated with seats are:

Description	Configuration Code	Seat Map Code
Blocked	B	B
Infant	I	I
Other RBD (Reservation Booking Designator)	K	K Reservado
para la aerolínea (para que no sea vendido Reserved for airline (not to be sold)	R	R Asiento no reclinable
Non-reclining seat	N	/ Columna
de Ventana Window Column	W	w> Columna
de Pasillo Aisle Column	A	» Asientos
de salida de emergencia Emergency Exit	E	= Asientos sobre el ala
Over Wing Seats	G	[

Configuración en el mapa de asientos

Se pueden establecer características especiales para cada asiento y que queden definidos con esta característica en el mapa de asientos asociado a una configuración

Para configurar las características especiales para cada asiento en el equipo deben realizarse los siguientes pasos

Configuration in the seat map

Special characteristics can be established for each seat and they are defined with this characteristic in the seat map associated with a configuration

To configure the special characteristics for each seat in the equipment, the following steps must be carried out

Code Block

language	vb
theme	FadeToGrey

1. OAC/SMR157                 (recuperaciónretrieval of delthe mapaseat demap asientosto abe modificarmodified)
2. OAC/SMM/                   (configuración del asiento/fila/columnaseat/row/column configuration)
3. OAC/SMV                    (visualizacióndisplay delof mapathe demodified asientosseat modificadomap)
4. OAC/SME                    (grabasave losthe cambioschanges realizadosmade enon elthe mapa deseat asientosmap)
5. OAC/SMI                    (ignoraignores losthe cambioschanges realizadosmade)

Recuperación del mapa de asientos

Recuperar en pantalla el mapa de asientos que se desea configurar con el siguiente comando:

Para ver el mapa de asientos de un vuelo reservado el comando es el siguiente

OAC/SMR<numero de seat map>

Ejemplo

Retrieval of the seat map

Retrieve the seat map to be configured on the screen with the following command:

To view the seat map of a flight booked on command is the following

OAC/SMR<seat map number>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMR157

DescripciónDescription:

OAC	Comando fijo que identifica a las configuraciones Fixed command that identifies the configurations (Aircraft Configuration)
/	Barra separadora Slash
SM	Indicador de seat Seat map indicator ( Mapa de asientos Seat map)
R	Indicador para recuperar el mapa en pantalla Indicator to retrieve the map on the screen (Retrieve)
157	Id del equipo de KASAT al que se asociará el Seat Map que tendrá el mismo número de Id

Al realizar este comando el sistema desplegará en pantalla el mapa de asiento, para su visualización y posterior modificación, como se muestra a continuación.

Respuesta

of the KASAT team to which the Seat Map will be associated that will have the same Id number

When executing this command, the system will display the seat map on the screen, for viewing and later modification, as shown below.

Response:

No Format

OAC/SMR157
[157]
   Y        [                                                                                      
   1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 
w>
F     I  I  I  R  A  I  A  A  I  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
E     I  I  I  R  A  I  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
D     I  I  I  R  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
»              =                 =           =  =                                                  
C  I  I  I  I  B  A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
B  I  I  I  I  B  A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
»              =                 =           =  =                                                  
A  I  I  I  I  B  A/ A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
w>
 

SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  /           RECLINE RESTRICTED
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Modificación/configuración de las característica de asientos

Dependiendo de la versión activada para la administración del manejo del mapa de asientos, los comandos para configurar las características especiales de los asientos son los siguiente:
- Una vez desplegado el mapa de asientos se debe indicar la modificación a realizar.
Dependiendo de la versión activada para la administración del manejo del mapa de asientos, los comandos para configurar las características especiales de los asientos son los siguientes

Configurar una característica

Modification/configuration of seating characteristics

Depending on the version activated for the management of the seating map, the commands to configure the special characteristics of the seats are the following:
- Once the seating map is displayed, it must be indicated the modification to be made.
Depending on the version activated for managing seat map management, the commands to configure the special characteristics of seats are as follows

Configure a feature:

OAC/SMM/<indicador><asiento><indicator><seat>

DondeWhere:

Indicador: es el código de configuración de la característica especial a configurar (de acuerdo a la tabla descrita previamente; en este caso para esta versión el código es de un carácter)
Asiento: es la identificación de la fila y/o columna del asiento a configurar

Ejemplo

Indicator: is the code of configuration of the special feature to be configured (according to the table previously described; in this case for this version the code is one character)
Seat: it is the identification of the row and/or column of the seat to be configured

Example:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM/I10F

DescripciónDescription:

OAC	Comando fijo que identifica a las configuraciones Fixed command that identifies the configurations (Aircraft Configuration)
/	Barra separadora Slash
SM	Indicador de seat map (Mapa de asientos) Seat map
M	Indicador para modificar el mapa desplegado previamente Indicator to modify the previously displayed map (modify)
/	Barra separadora Slash
I	Código de característica a configurar, en este caso I (indicador de infante)
10F	Asiento al cual se le asigna la característica (fila 10 / columna F)

Opciones de configuración para más de un asiento/fila completa/columna completa

Un asiento: 2A

Varios asientos: 2AB3C

Una fila entera: 4*

Varias filas enteras

Feature code to configure, in this case I (infant indicator)
10F	Seat to which the characteristic is assigned (row 10 / column F)

Configuration options for more than one seat/full row/c full column

One seat: 2A
Multiple seats: 2AB3C
One full row: 4*
Multiple full rows: 4*5*

Un asiento y una fila entera

One seat and one full row: 3B5*

Eliminar una característica configurada previamente

Si se desea eliminar la configuración de una característica de un asiento se deberá ingresar el comando de la siguiente manera, con el símbolo negativo delante del número de asiento, como se muestra a continuación

Delete a previously configured feature

If you want to delete the configuration of a feature from an entry, you must enter the command as follows, with the negative symbol in front of the entry number, as shown below:

OAC/SMM/<indicador><indicator>-<asiento><seat>

EjemploExample:

Code Block

language	vb
theme	FadeToGrey

OAC/SMM/I-10F

Con esta entrada se elimina el permiso para que en el asiento 10F se pueda sentar un adulto con un infanteThis entry removes the permission for an adult with an infant to sit in seat 10F

Visualización / Redespliegue mapa de asientos

Una vez ingresadas las modificaciones en el mapa de asientos, se puede ingresar el siguiente comando para visualizar los cambios realizados hasta el momento, con el siguiente comandoOnce the modifications have been entered in the seat map, you can enter the following command to display the changes made so far, with the following command:

Code Block

language	vb
theme	FadeToGrey

OAC/SMV

Ignorar

Ignore Seat MapEn

cualquier momento se puede ignorar lo que se esté modificando o creandoAt any time you can ignore what is being modified or created:

Code Block

language	vb
theme	FadeToGrey

OAC/SMI

Guardar

Save Seat Map

Una vez agregado todos los indicadores, se debe grabar/guardar el seat mapOnce all the indicators have been added, the seat map must be saved/recorded:

Code Block

language	java
theme	FadeToGrey

OAC/SME

Borrar un

Delete a seat map

OAC/SMD{numero de seat map creadonumber created}

Clonar un

Clone a seat map

OAC/SMC{numero de seat map creadonumber created}

Generar gráfico del mapa de asientos

Una vez creado el seat map, podemos generar el gráfico o dibujo del mismo.

Generate seat map graphic

Once the seat map has been created, we can generate its graphic or drawing

OAC/SMG{numero de seat map creadonumber created}

Note
Si se modifica la configuración de un seat map, que está siendo usado en un vuelo, los cambios no se reflejarán automáticamente, sino que se tendrá que desasignar la matricula en uso, asignar otra y luego volver a asignar la que tenía originalmente. En este momento se reflejarán los cambios realizados en el OAC/SM.

Lista de comandos

ItemComandoDescripciónEjemplo

Modificadores

OAC/SMx

If the configuration of a seat map, which is being used on a flight, is modified, the changes will not be reflected automatically, but the license plate in use will have to be unassigned, assign another and then reassign the one you originally had.
At this time the changes made in the OAC/SM will be reflected.

List of Commands

RecuperarModificadores

Item	Command	Description	Example
OAC/SMx Modifiers	OAC/SMx *: List all A: Add M: Modify D: Delete R: Retrieve V: View I: Ignore E: End and Save changes	Posibles modificadores para Possible modifiers for OAC/ SMx
Lista List	OAC/SM*	Lista de equipos creados	List of equipments created
Retrieve	OAC/SMR/<id Seat Map>	Recuperar Retrieve Seat Map en pantalla on screen	OAC/SMR1
Ignorar Ignore	OAC/SMI	Ignorar Ignore retrieved Seat Map recuperado
Visualizar View	OAC/SMV	Redesplegar Redisplay Seat Map recuperado recovered
Guardar cambios Save changes	OAC/SME	Guardar cambios aplicados al Save changes applied to the retrieved Seat Map recuperado
Eliminar Delete	OAC/SMD/<id Seat Map>	Eliminar Delete Seat Map	OAC/SMD1
OAC/SMM//xx Modifiers	OAC/SMM/x I: Assign Infants B: Blocked Seat R: Reserved Seat W: Window (sólo a columnas) A: Aisle (sólo a columnas) G: Wing (sólo a filas) N: Not Recline E: Emergency Exit (sólo a filas) V: Preferential Seat K: RBDs restriction (sólo a filas)	Posibles modificadores para Possible modifiers for OAC/SMM/x
Ventana Window	OAC/SMM/W<columna>W<column> OAC/SMM/W-<columna>Indicar columna de ventana<column>	Indicate window column	OAC/SMM/WA OAC/SMM/W-A
Pasillo Aisle	OAC/SMM/A<columna>A<column> OAC/SMM/A-<columna>Indicar columna de pasillo<column>	Indicate aisle column	OAC/SMM/AG OAC/SMM/A-G
Alas Wings	OAC/SMM/G<fila>G<row> OAC/SMM/G-<fila>Indicar filas sobre las alas<row>	Indicate rows above wings	OAC/SMM/G8 OAC/SMM/G-8
Exit	OAC/SMM/E<fila>E<row> OAC/SMM/E-<fila>Indicar filas de Salida de Emergencia<row>	Indicate rows of Emergency Exit	OAC/SMM/E8 OAC/SMM/E-8
Infante Infant	OAC/SMM/I<filasI<rows/asientos>seats> OAC/SMM/I-<filas<rows/asientos>seats>	Indicar filas/asientos aptos infantesIndicate rows/seats suitable for infants	OAC/SMM/I112H13 OAC/SMM/I-12H
Reservado Reserved	OAC/SMM/R<filasR<rows/asientos>seats> OAC/SMM/R-<filas<rows/asientos>seats>	Indicar filas/asientos ReservadosIndicate rows/seats Reserved	OAC/SMM/R3* OAC/SMM/R-3*
Bloqueado Blocked	OAC/SMM/B<filasB<rows/asientos>seatss> OAC/SMM/B-<filas<rows/asientos>seats>	Indicar filas/asientos BloqueadosIndicate rows/seats Blocked	OAC/SMM/B5AB OAC/SMM/B-5A
No Reclina Non-reclining	OAC/SMM/N<filasN<rows/asientos>seatss> OAC/SMM/N-<filas<rows/asientos>Indicar filas/asientos no reclinablesseats>	Indicate non-reclining rows/seats	OAC/SMM/N3* OAC/SMM/N-3D
Preferencial Preferential	OAC/SMM/V<filasV<rows/asientos>seats> OAC/SMM/V-<filas<rows/asientos>seats>	Indicar filas/asientos Preferenciales Indicate rows/seats Preferential (VIP)	OAC/SMM/V3* OAC/SMM/V-3*
RBD	OAC/SMM/K<filas>K<rows>/<RBDs> OAC/SMM/K<filas>K<rows>/*	Indicar filas con restricciones según Indicate rows with restrictions according to RBD (* indica todos los RBDindicates all RBDs)	OAC/SMM/K113/ABK OAC/SMM/K113/*

Configuración características en mapa de asientos de los equipos (con versión

Configuration of characteristics in the equipment seat map (with version 2)

Introducción

En este capítulo se explica la metodología para la asignación de las características especiales de los asientos en los mapas de asientos de los equipos a través del OAC; teniendo en cuenta que la activación de la aerolínea para la administración de los mapas de asientos es la versión 2.

Descripción

Se pueden establecer características especiales para cada asiento y que queden definidos con esta característica en el mapa de asientos asociado a una configuración
Dependiendo el tipo de activación que posea la aerolínea existen 2 tipos de configuración en la administración y visualización de los mapas de asientos.
En este capítulo se describe la metodología para la asignación de las características con la versión 1 activada

Activación del tipo de versión:

La versión a utilizar por la línea aérea es configurable por cliente y debe ser requerido a Soporte para su configuración

Características soportadas por la versión 2

En esta versión se incorpora la posibilidad de asignar y visualizar múltiples características al mismo asiento y permite administrar nuevas características que no se encuentran vigentes en la versión 1 (asientos que tengan cargador de electricidad, asientos que permitan asignar a personas en silla de rueda, asientos que permitan sentar menores no acompañados)
Asimismo permite la configuración de mapas de asiento identificando configuraciones de aircraft con dos pisos. El piso superior es identificado como upper deck y el principal como main deck
En los asientos que se encuentren en las filas configuradas en el upper deck también pueden configurarse características especiales y múltiples (de la misma forma que se configura en el main deck)
Esta configuración permite administrar el mapa de asientos que contengan características múltiples en el mismo asiento (tanto operativas como comerciales) y asimismo se incorpora la posibilidad de configurar/visualizar asientos que permitan pasajeros con movilidad reducida (wheelchair) y menor no acompañado (unaccompanied minor).
Estas nuevas características son solamente visualizadas en el mapa de asientos desplegables en el PV, el PC, el OAC y en KPRS, es decir no se visualizan en el gráfico que se despliega al momento de realizar el checkin ni al solicitar el PS.

Las características especiales que pueden asociarse (tanto para el upper deck como para el main deck) a los asientos son las siguientes:

DescripciónCódigo configuraciónCódigo visualización en el mapa

Bloqueado

Introduction

This chapter explains the methodology for assigning the special characteristics of the seats in the seating maps of the teams through the OAC; taking into account that the activation of the airline for the administration of seat maps is version 2.

Description

Special characteristics can be established for each seat and that they are defined with this characteristic in the seat map associated with a configuration
Depending on the type of activation that the airline has, there are 2 types of configuration in the administration and visualization of seat maps.
This chapter describes the methodology for assigning features with version 1 activated Version

Activation by type:

The version to be used by the airline is configurable by the customer and must be requested from Support for its configuration

Features supported by the version 2

This version incorporates the possibility of assigning and displaying multiple characteristics to the same seat and allows managing new characteristics that are not in force in version 1 (seats that have an electricity charger, seats that allow assigning people in wheelchairs, seats that allow unaccompanied minors to sit)
It also allows the configuration of seat maps identifying aircraft configurations with two floors. The upper deck is identified as the upper deck and the main deck as the main deck
In the seats that are in the rows configured in the upper deck, special and multiple characteristics can also be configured (in the same way that it is configured in the main deck)
This configuration It allows managing the map of seats that contain multiple characteristics in the same seat (both operational and commercial) and also incorporates the possibility of configuring/viewing seats that allow passengers with reduced mobility (wheelchair) and unaccompanied minor (unaccompanied minor).
These new features are only displayed on the drop-down seat map at the PV, PC, OAC and KPRS, that is, they are not displayed on the graph that is displayed at the time of check-in or when requesting the PS.

The special characteristics that can be associated (both for the upper deck and for the main deck) to the seats are the following:

Description	Configuration Code	Seat Map Code
Blocked	BS	B
AC Power	AC	E
InfanteInfant	AI	i
Otros Other RBD (Reservation Booking Designator)	BK	K
Extra legroom	LS	L
Disponible para silla de ruedasAvailable for wheelchair	WC	M
Pre-reserved seat (PRS)	N/A (desde función from KPRS function)	P
Reservado para la aerolínea (para que no sea vendidoReserved for the airline (not to be sold)	RS	R
Disponible para Menor no acompañadoAvailable for Unaccompanied Minor	UM	U
Preferent/Premium Seat	VS	V
Asiento no reclinableNon-Reclining Seat	NR	/
Asiento con costoAt Cost Seat	CS	$
Columna de VentanaWindow Column	WN	w>
Columna de PasilloAisle Column	AL	»
Asientos de salida de emergenciaEmergency exit seat	EX	=
Asientos sobre el alaOverwing seats	WG	[
Upper deck	UP	<upper deck>
Only Adults	OA	O

Configurar en el mapa de asientos

Se pueden establecer características especiales para cada asiento y que queden definidos con esta característica en el mapa de asientos asociado a una configuración

Para configurar las características especiales para cada asiento en el equipo deben realizarse los siguientes pasos

Configure in the seat map

Special characteristics can be established for each seat and they are defined with this characteristic in the seat map associated with a configuration

To configure the characteristics Special features for each seat in the equipment the following steps must be performed

Code Block

language	xml
theme	FadeToGrey

1. OAC/SMR157                 (recuperaciónseat delmap maparetrieval de asientos a modificarto modify)
2. OAC/SMM/                   (configuración del asiento/fila/columnaseat/row/column configuration)
3. OAC/SMV                    (visualizaciónseat delmap mapadisplay demodified asientosseat modificadomap)
4. OAC/SME                    (grabasave losthe cambioschanges realizadosmade ento elthe mapaseat de asientosmap)
5. OAC/SMI                    (ignoraignores losthe cambioschanges realizadosmade)

Recuperación del mapa de asientos

Recuperar en pantalla el mapa de asientos que se desea configurar con el siguiente comando:

Para ver el mapa de asientos de un vuelo reservado el comando es el siguiente

OAC/SMR<nro de seat map>

Ejemplo

Retrieval of the seat map

Retrieve on screen the seat map to be configured with the following command:

To see the seat map of a reserved flight, the command is the following

OAC/SMR<seat map number>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMR157

DescripciónDescription:

OAC	Comando fijo que identifica a las configuraciones Fixed command that identifies the configurations (Aircraft Configuration)
/	Barra separadoraSlash
SM	Indicador de seat map (Mapa de asientos)	R	Indicador para recuperar el mapa en pantalla Seat Map Indicator
R	Indicator to retrieve the map on the screen (Retrieve)
157	Id del equipo de KASAT al que se asociará el Seat Map que tendrá el mismo número de Id

Al realizar este comando el sistema desplegará en pantalla el mapa de asiento, para su visualización y posterior modificación, como se muestra a continuación.

Respuesta

of the KASAT team to which the Seat Map will be associated, which will have the same Id number

When carrying out this command, the system will display on the screen the seat Map, for viewing and later modification, as shown below.

Response:

No Format

OAC/SMR157
[157]
     Y              [                                                                                                                                                
     1    2    3    4    5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   
w>
F        iA   iA   iA    R    A   i*$L  U    A   iA    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E        iA   iA   iA    R    A   iA$+  M    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D        iA   iA   iA    R    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                             =                   =    =                                                                                   
C   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
B   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                             =                   =    =                                                                                   
A   iA   iA   iA   iA    B    /    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
w>
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS


SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  E           AVAILABLE WITH AC POWER
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  L           AVAILABLE EXTRA LEGROOM SEAT
  M           AVAILABLE TO WHEELCHAIR
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  U           AVAILABLE TO UNACCOMPANIED MINOR
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  *           MULTIPLE OPERATIONAL CHARACTERISTICS
  +           AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Modificación/configuración de las características de asientos

Los comandos para configurar las características especiales de los asientos son los siguientes:

Una vez desplegado el mapa de asientos se debe indicar la modificación a realizar.

Dependiendo de la versión activada para la administración del manejo del mapa de asientos, los comandos para configurar las características especiales de los asientos son los siguientes

Modification/configuration of seat characteristics

The commands to configure the special characteristics of seats are as follows:
- Once the seat map is displayed, the modification to be made must be indicated .
Depending on the version activated for managing seat map management, the commands to configure the special characteristics of seats are the following

Code Block

language	vb
theme	FadeToGrey

OAC/SMM//<indicador><asiento><indicator><seat>

DondeWhere:

Indicador: es el código de configuración de la característica especial a configurar (de acuerdo a la tabla descrita previamente; en este caso para esta versión el código es de dos caracteres)
Asiento: es la identificación de la fila y/o columna del asiento a configurar

Ejemplo

Indicator: is the configuration code of the special feature to configure (according to the table previously described; in this case for this version the code is two characters)
Seat: is the identification of the row and/or column of the seat to configure

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMM//AI10F

DescripciónDescription:

OAC	Comando fijo que identifica a las configuraciones Fixed command that identifies the configurations (Aircraft Configuration)
/	Barra separadoraSlash
SM	Indicador de seat map (Mapa de asientos)Seat map
M	Indicador para modificar el mapa desplegado previamente Indicator to modify the previously displayed map (modify)
//	Doble barra separadora (utilizada para identificar la version 2
AI	Código de característica a configurar, en este caso AI (indicador de infante)
10F	Asiento al cual se le asigna la característica (fila 10 / columna F)

Opciones de configuración para más de un asiento/fila completa/columna completa

- Un asiento: 2A
- Varios asientos: 2AB3C
- Una fila entera: 4*
- Varias filas enteras: 4*5*
- Un asiento y una fila entera: 3B5*

Configuración de filas en equipos con dos pisos

Con esta versión, se introduce la posibilidad de configurar mapas de asientos para los aircraft con dos pisos. El piso superior es identificado como upper deck y el principal como main deck
Se debe configurar por fila completa y admite que cada asiento que se encuentra en el upper deck pueda configurarse cualquiera de las características especiales soportadas (Infante/Menor no acompañado, etc)

Teniendo recuperado el mapa de asientos, es decir

Double Slash (used to identify version 2)
AI	Feature code to configure, in this case AI (infant indicator)
10F	Seat to which the feature is assigned (row 10 / column F)

Configuration options for more than u n seat/full row/full column

One seat: 2A
Multiple seats: 2AB3C
One full row: 4*
Multiple full rows: 4*5*
One seat and one full row: 3B5*

Equipment Row Configuration with two floors

With this version, the possibility of configuring seat maps for aircraft with two floors is introduced. The upper deck is identified as upper deck and the main deck as the main deck
It must be configured per full row and allows each seat located on the upper deck to be configured with any of the special characteristics supported (Infant/Unaccompanied Minor, etc.)

Having retrieved the seat map, that is:

No Format

OAC/SMR143
[143]
     F         C                        Y                                                                                                                                                                                   
     1    2    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   
K    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
J              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
H    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
G              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                         
E                                       A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                         
B              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    <= ROW SHOWN IN AGT
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

Pueden configurarse las filas que estarán en el upper deck de la siguiente formaThe rows that will be in the upper deck can be configured as follows:

Code Block

language	java
theme	FadeToGrey

OAC/SMM//<indicador><fila>

Donde el indicador es UP

Ejemplo

<indicator><row>

Where UP is the indicator

Example:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM//UP10

RespuestaResponse:

No Format
OAC/SMM//UP10 OK

Despliegue Modified seat map modificadodisplay:

No Format

 UPPER DECK
     C     
     10   
K    A   
J    A   
H    A   
G    A   
»         
E        
D    A   
C    A   
»         
B    A   
A    A   
     N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    <= ROW SHOWN IN AGT
     N    <= ROW HAS RBD RESTRICTIONS
MAIN DECK
     F         C                   Y                                                                                                                                                                                   
     1    2    6    7    8    9    11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   
K    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
J              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
H    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
G              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                    
E                                  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                    
B              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    <= ROW SHOWN IN AGT
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

Eliminar una característica configurada previamente

Si se desea eliminar la configuración de una característica de un asiento se deberá ingresar el comando de la siguiente manera, con el símbolo negativo delante del número de asiento, como se muestra a continuación

Delete a previously configured feature

If you want to delete the configuration of a feature of a seat, you must enter the command as follows, with the symbol negative in front of the seat number, as shown below:

OAC/SMM//<indicador><indicator>-<asiento><seat>

EjemploExample:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM//AI-10F

Con esta entrada se elimina el permiso para que en el asiento 10F se pueda sentar un adulto con un infante

Visualización / Redespliegue mapa de asientos

Una vez ingresadas las modificaciones en el mapa de asientos, se puede ingresar el siguiente comando para visualizar los cambios realizados hasta el momento, con el siguiente comandoWith this entry the permission is removed so that seat 10F can seat an adult with an infant

View / Redisplay seat map

Once the modifications have been registered in the seat map, the following command can be entered to view the changes made so far, with the following command:

Code Block

language	java
theme	FadeToGrey

OAC/SMV

Ignorar

Ignore seat map

En cualquier momento se puede ignorar lo que se esté modificando o creandoOn you can ignore what is being modified or created at any time:

Code Block

language	java
theme	FadeToGrey

OAC/SMI

Guardar

Save seat map

Una vez agregado todos los indicadores, se debe grabar/guardar el Once all the indicators have been added, you must record/save give the seat map:

Code Block

language	java
theme	FadeToGrey

OAC/SME

Borrar

Delete seat map

OAC/SMD{numero de seat map creadonumber created}

Clonar

Clone seat map

OAC/SMC{numero de seat map creadonumber created}

Generar gráfico del

Generate seat map

Una vez creado el

graphic

Once the seat map , podemos generar el gráfico o dibujo del mismois created, we can generate the graph or drawing of it.

OAC/SMG{numero de seat map creadonumber created}

Note
Si se modifica la configuración de un seat map, que está siendo usado en un vuelo, los cambios no se reflejarán automáticamente, sino que se tendrá que desasignar la matricula en uso, asignar otra y luego volver a asignar la que tenía originalmente. En este momento se reflejarán los cambios realizados en el OAC/SM.

Visualización múltiples características de un asiento

Se incorpora la alternativa de la visualización de todas las características configuradas en un mismo asiento.
Los asientos que tengan múltiples características pueden ser identificados en el despliegue del mapa con un signo "+" para las características comerciales que tiene ese asiento, y un signo "*" cuando posea múltiples características operativas.
Identificación de múltiples características para un mismo asiento (desde el SMR o con el SMV)

Ejemplo (asientos

If the configuration of a seat map, which is being used on a flight, is modified, the changes will not be reflected automatically, but the license plate in use will have to be unassigned, assign another and then reassign the one you originally had.
At this time the changes made in the OAC/SM will be reflected.

Visualization of multiple characteristics of a seat

The option of visualizing all the characteristics configured in the same seat is incorporated.
Seats that have multiple features can be identified on the map display with a "+" sign for the commercial features that seat has, and a "*" sign when it has multiple operational features
Identification of multiple characteristics for the same entry (from the SMR or with the SMV)

Example (seats 7F y 7E)

Code Block

language	vb
theme	FadeToGrey

OAC/SMV<asiento>SMV<seat>

RespuestaResponse:

No Format

OAC/SMV
[157]
     Y              [                                                                                                                                                
     1    2    3    4    5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   
w>
F        iA   iA   iA    R    A   i*$L  A    A   iA    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E        iA   iA   iA    R    A   iA$+  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D        iA   iA   iA    R    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                                                 =    =                                                                                   
C   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
B   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                                                 =    =                                                                                   
A   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
w>
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

Para visualizar las múltiples características que contiene un asiento en particular, el formato es el siguienteTo view the multiple characteristics contained in a particular seat, the format is as follows:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/<asiento><seat>

EjemploExample:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/7E

RespuestaResponse:

No Format
SEAT 7E CHARACTERISTICS i - ALLOW INFANTS $ - CHARGEABLE SEAT L - EXTRA LEGROOM SEAT E - AC POWER

Ejemplo:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/7F

Respuesta:

No Format
SEAT 7F CHARACTERISTICS i - ALLOW INFANTS M - WHEELCHAIR U - UNACCOMPANIED MINOR $ - CHARGEABLE SEAT L - EXTRA LEGROOM SEAT w> - WINDOWS SEAT

DescripciónDescription:

OAC	Comando fijo que identifica a las configuraciones Fixed command that identifies the configurations (Aircraft Configuration)
/	Barra separadoraSlash
SM	Indicador de seat map (Mapa de asientos)Seat map indicator
S	Indicador de despliegue (show)IShow indicator
/	Barra separadoraSlash
7F	Asiento que tiene un Seat that has a "*" en el despliegue previoin the previous display

List of Commands

Recuperar

Item	Command	Description	ExampleModificadores
OAC/SMxSMx Modifiers	OAC/SMx *: List all A: Add M: Modify D: Delete R: Retrieve V: View I: Ignore E: End and Save changes	Posibles modificadores para Possible modifiers for OAC/SMx
ListaList	OAC/SM*	Lista de equipos creados	List of created equipments
Retrieve	OAC/SMR/<id Seat Map>	Recuperar Retrieve Seat Map en pantallaon screen	OAC/SMR1
IgnorarIgnore	OAC/SMI	Ignorar Ignore Retrieved Seat Map recuperado
VisualizarView	OAC/SMV	Redesplegar Redisplay Retrieved Seat Map recuperado
Guardar cambiosSave Changes	OAC/SME	Guardar cambios aplicados al Save Changes Applied to Retrieved Seat Map recuperado
EliminarDelete	OAC/SMD/<id Seat Map>	Eliminar Delete Seat Map	OAC/SMD1
Modificadores OAC/SMM//xx Modifiers	OAC/SMM//x AI: Assign Infants AC: Cargador de celularPhone Charger CS: Chargeable Seat BS: Blocked Seat RS: Reserved Seat WN: Window (sólo a columnasonly columns) AL: Aisle (sólo a columnasonly columns) WG: Wing (sólo a filasonly rows) NR: Not Recline EX: Emergency Exit (sólo a filasonly rows) LS: Extra Leg Room Seat VS: Preferential Seat BK: RBDs restriction (sólo a filasonly rows) WC: Silla de ruedasWheelchair UM: menor no acompañadoUnaccompanied minor OA: Only Adults	Posibles modificadores para Possible modifiers for OAC/SMM//x
VentanaWindow	OAC/SMM//WN<columna>WN<column> OAC/SMM//WN-<columna>Indicar columna de ventana<column>	Indicate window column	OAC/SMM//WNA OAC/SMM//WN-A
PasilloAisle	OAC/SMM//AL<columna>AL<column> OAC/SMM//AL-<columna>Indicar columna de pasillo<column>	Indicate aisle column	OAC/SMM//ALG OAC/SMM//AL-G
AlasWings	OAC/SMM//WG<fila>WG<row> OAC/SMM//WG-<fila>Indicar filas sobre las alas<row>	Indicate rows above wings	OAC/SMM//WG8 OAC/SMM//WG-8
Exit	OAC/SMM//EX<fila>EX<row> OAC/SMM//EX-<fila>Indicar filas de Salida de Emergencia<row>	Indicate rows of Emergency Exit	OAC/SMM//EX8 OAC/SMM//EX-8
InfanteInfant	OAC/SMM//AI<filasAI<rows/asientos>seats> OAC/SMM//AI-<filas<rows/asientos>Indicar filas/asientos aptos infantesseats>	Indicate rows/seats suitable for infants	OAC/SMM//AI112H13 OAC/SMM//AI-12H
ReservadoReserved	OAC/SMM//RS<filasRS<rows/asientos>seats> OAC/SMM//RS-<filas<rows/asientos>Indicar filas/asientos Reservadosseats>	Indicate rows/seats Reserved	OAC/SMM//RS3* OAC/SMM//RS-3*
BloqueadoBlocked	OAC/SMM//BS<filasBS<rows/asientos>seats> OAC/SMM//BS-<filas<rows/asientos>Indicar filas/asientos Bloqueadosseats>	Indicate rows/ Blocked seats	OAC/SMM//BS5AB OAC/SMM//BS-5A
No ReclinaRecline	OAC/SMM//NR<filasNR<rows/asientos>seats> OAC/SMM//NR-<filas<rows/asientos>Indicar filas/asientos no reclinablesseats>	Indicate non-reclining rows/seats	OAC/SMM//NR3* OAC/SMM//NR-3D
PreferencialPreferential	OAC/SMM//VS<filasVS<rows/asientos>seats> OAC/SMM//VS-<filas<rows/asientos>Indicar filas/asientos Preferenciales seats>	Indicate rows/Preferential seats (VIP)	OAC/SMM//VS3* OAC/SMM//VS-3*
Extra Leg	OAC/SMM//LS<filasLS<rows/asientos>seats> OAC/SMM//LS-<filas<rows/asientos>Indicar filas/asientos con espacio extra seats>	Indicate rows/seats with extra space (Extra Leg Room)	OAC/SMM//LS3* OAC/SMM//LS-3*
CostoCost	OAC/SMM//CS<filasCS<rows/asientos>seats> OAC/SMM//CS-<filas<rows/asientos>Indicar filas/asientos con costoseats>	Indicate rows/seats with cost	OAC/SMM//CS11DEF OAC/SMM//CS-11E
RBD	OAC/SMM//BK<filas>BK<rows>/<RBDs> OAC/SMM//BK<filas>BK<row>/*	Indicar filas con restricciones según Indicate rows with restrictions according to RBD (* indica todos los RBDindicates all RBDs)	OAC/SMM//BK113/ABK OAC/SMM//BK113/*
AC Power (cargador energíapara celularcellphone charger)	OAC/SMM//AC<filasAC<rows/asientos>seats> OAC/SMM//AC<filasAC<rows/asientos> Indicar filas con cargador de energíaseats>	Indicate rows with power charger	OAC/SMM//AC112H13 OAC/SMM//AC112H13
WC (silla de ruedaswheelchair)	OAC/SMM//WC<filasWC<rows/asientos>seats> OAC/SMM//WC<filasWC<rows/asientos> Indicar filas/asientos disponible para silla de ruedasseats>	Indicate rows/seats available for wheelchair	OAC/SMM//WC112H13 OAC/SMM//WC112H13
UM (menor no acompañadounaccompanied minor)	OAC/SMM//UM<filasUM<rows/asientos>seats> OAC/SMM//UM<filasUM<rows/asientos> seats>	Indicar filas/asientos disponible para menor no acompañadoIndicate rows/seats available for unaccompanied minor	OAC/SMM//UM112H13 OAC/SMM//UM112H13
Upper deck	OAC/SMM//UP<fila> Indicar fila que se encuentra en el piso superiorUP<row>	Indicate row located on the upper deck	OAC/SMM//UP10
Only Adults	OAC/SMM//OA<filasOA<rows/asientos> Seat available only for seats>	Indicate rows/seats that only accept adult passengers	OAC/SMM//OA112H13

Quick

reference configuración seat map

Reference Seat Map Configuration (OAC/PC)

Guía rápida seat map

Característica

Visualización seatmap

Configuración equipo con

Seat map quick guide

Feature	Seatmap display Unit	Configuration with VSM-1 (OAC/SMM/)	Configuración equipo con Configuration with VSM-2 (OAC/SMM//)	Configuración PC con Configuration with VSM-1Configuración	PC con Configuration with VSM-2
BloqueadoBlocked	B	OAC/SMM/B1A	OAC/SMM//BS1A	PC301/6MARMAD,SMP/B+2J	PC301/6MARMAD,SMP//BS+2J
AC Power	E	N/A	OAC/SMM//AC1A	N/A	PC210/7JANAEP,SMP//AC5F
InfanteInfant	I	OAC/SMM/I1A	OAC/SMM//AI1A	PC210/7JANAEP,SMP/I4F	PC210/7JANAEP,SMP//AI4F
Other RBD	K	OAC/SMM/K1A	OAC/SMM//BK1A	N/A	N/A
Extra legroom	L	N/A	OAC/SMM//LS1A	N/A	N/A
Wheelchair	M	N/A	OAC/SMM//WC1A	N/A	PC210/7JANAEP,SMP//WC4F
Pre-reserved seat	P	N/A	N/A	N/A	N/A
Reservado para la aerolíneaReserved for airline	R	OAC/SMM/R1A	OAC/SMM//RS1A	PC210/7JANAEP,SMP/R3A	PC210/7JANAEP,SMP//RS4F
Menor no acompañadoUnaccompanied minor	U	N/A	OAC/SMM//UM1A	N/A	PC3270/1JUNCOR,SMP//UM8A
Preferent/Premium seat	V	OAC/SMM/V1A	OAC/SMM//VS1A	N/A	N/A
Múltiples características operativasMultiple operating features	*	N/A	N/A	N/A	N/A
Múltiples características comercialesMultiple commercial features	+	N/A	N/A	N/A	N/A
Asiento no Non-reclinable Seat	/	OAC/SMM/N10A	OAC/SMM//NR1A	N/A	N/A
Asiento con cargoSeat with charge	$	N/A	OAC/SMM//CS1A	N/A	N/A
Columna de VentanaWindow Column	w>	OAC/SMM/WF	OAC/SMM//WNF	N/A	N/A
Columna de PasilloAisle Column	>>	OAC/SMM/AD	OAC/SMM//ALD	N/A	N/A
Salida de emergenciaEmergency Exit	=	OAC/SMM/E5	OAC/SMM//EX5	N/A	N/A
AlaWing	[	OAC/SMM/G4	OAC/SMM//WG4	N/A	N/A
Upper deck	UPPER DECK	N/A	OAC/SMM//UP10	N/A	N/A
Only Adults	O	N/A	OAC/SMM//OA1*5ABC	N/A	N/A

Version	Old Version 23	New Version 24
Changes made by	Maria Fernanda Chaguan	Maria Fernanda Chaguan
Saved on	Sept 12, 2022	Sept 12, 2022

Page Comparison

Versions Compared

Key

Managing the seat map from the control panel (version 1)

Block or reserve seats

Managing the seat map by using entries

Reserve Seats

Block Seats

Lap Infant indicator

Delete lap Infant indicator

Managing the seat map from the control panel (version 2)

Configurate features to seats

Delete previously configured features

Delete a configuration:

Viewing the seat map

Visualization of multiple characteristics of a seat

Introducción

Descripción

Características soportadas por la versión 1

Configuration of characteristics in the equipment seat map (with version 1)

Features supported by version 1

Configuración en el mapa de asientos

Configuration in the seat map

Recuperación del mapa de asientos

Retrieval of the seat map

Modificación/configuración de las característica de asientos

Modification/configuration of seating characteristics

Eliminar una característica configurada previamente

Delete a previously configured feature

Visualización / Redespliegue mapa de asientos

Generar gráfico del mapa de asientos

Generate seat map graphic

Lista de comandos

List of Commands

Configuration of characteristics in the equipment seat map (with version 2)

Introducción

Descripción

Características soportadas por la versión 2

Features supported by the version 2

Configurar en el mapa de asientos

Configure in the seat map

Recuperación del mapa de asientos

Retrieval of the seat map

Modificación/configuración de las características de asientos

Modification/configuration of seat characteristics

Configuración de filas en equipos con dos pisos

Equipment Row Configuration with two floors

Eliminar una característica configurada previamente

Delete a previously configured feature

Visualización / Redespliegue mapa de asientos

View / Redisplay seat map

Ignore seat map

Save seat map

Delete seat map

Clone seat map

Generate seat map

graphic

Visualización múltiples características de un asiento

Visualization of multiple characteristics of a seat

List of Commands

Quick

Reference Seat Map Configuration (OAC/PC)

Guía rápida seat map

Seat map quick guide