General information

This functionality allows seats pre-assigment from the reservations module.

A Seat Map assigned to each equipment is created in the KASAT table that allows pre-assignment. When creating a flight through the Schedule module with an equipment with PRS, an inventory of Seat Map will be generated, creating an independent Seat Map for each flight / date generated.

Different features can be assigned to each seat / row / column of the Seat Map that will then be shown in the display (Seat Map Display). These are the conditions for the corresponding pre-assignment, for example, seats with additional cost or enabled only for certain classes of Reservations.

The seats can be preassigned from the PNR creation according to the parameters configuration set in JJPRS.

Once the Flight Check-In is enabled, the Seat Map assigned to the Check-In and flight registration must have the same conditions as the one created in Schedule and assigned in the KASAT table. Both seat maps will be kept in sync with each other allowing them to continue pre-assigning seats from the reservation module as well as assigning seats through the WebCheck-In (v2) or counters. If there are discrepancies between both Seat Maps, while the flight is available in the Check-In, pre-assignment will be allowed only for those seats that exist in both Seat Maps in the same cabin.

A passenger with a pre-assigned seat in a reservation can be checked directly through WebCheck-In or at counters. The seat can also be modified at the time of acceptance.

When modifying any preassigned seats at the time of Check-In, the system will release the pre-assigned seat but will not modify the SEAT element in PNR. That is, visually, the PNR will remain with the preassigned seat even if it has been released.

A single Seat Map can only be assigned to a single KASAT equipment and the Seat Map number created will match the KASAT equipment to which it is related.

Automatic seats re-accommodation will be possible only in cases when an equipment change occurs and the pre-assigned seat exists and is available in the new Seat Map. In cases where the same seat is not available, or in case of flight cancellation, the system will proceed to change the status of all SEAT elements to UN and place all PNRs on HDQ queue 55 and of the corresponding city for manual seat re-accommodation.

In case of creating, modifying, or deleting Seat Maps already assigned to active flights, the system will allow to change the same equipment already assigned for the changes to be applied through Schedules.

Documentos para clientes

KPRS - Kiu Pre Reserved Seats - Líneas aéreas
- DOC v1
- PDF v1
KPRS - Kiu Pre Reserved Seats - Agencias
- DOC v1
- PDF v1
KPRS - WebServices
- Seat Map Display v1
- Preasignación de asiento v1

En una v2 de KPRS Líneas aéreas y Agencias se deberá agregar a medida que esté disponbile:

Configuración JJPRS
WebCheckin
Otros GDS
Ancillaries

Considerations:

Seat Maps are created by the system, for each flight / date, at the time of equipment assignment (KASAT) that has an designated Seat Map (KPRS)
Parameters in this table define whether display and pre-assignment commands (4G) are allowed or not according to the flight date of departure and the date on which the commands are performed.
CRC or inventory commands (VST and VST / SS) can be executed at any time. The system will add a notification that the pre-assignment is deactivated by this table
Definitions of the JJPRS table are applicable to the entire Host and all systems and channels that use pre-allocation
Values of the JJPRS table are valid from the moment the parameters are configured.

Parameters

[ENA] - Enable PRS

This field defines the number of days before the departure of each flight that will begin to offer seats pre-assignment through the reservation module.
This table starts with a default value of 90 days before the departure of the flight.

[DIS] - Disable PRS

In this field, the number of hours before the departure of each flight will be defined, which will be omitted from pre-assigning seats through the reservation module.
This table starts with a default value of 2 (two) hours before the departure of the flight.

Designated Commands

Pre-assignment command (4G)

If an attempt to display a Seat Map or pre-assign a seat is done before the date enabled in the ENABLE PRS parameter or after the time set in the DISABLE PRS parameter, the system will respond with the error message NOT ALLOWED - PRS NOT ENABLED.

Inventory commands(VST)

VST and VST /SS inventory commands will always be available for the airline to check and control . If the flight departure is before the time established in the ENABLE PRS parameter or after the DISABLE PRS parameter, the responses will show the Seat Maps information and corresponding preassigned entries together with an alert indicating that the pre-assignment is not available: PRS NOT ENABLED - CHECK JJPRS

Seat Maps Configuration

Seat Maps

Once the Seat Maps are created, they can be viewed through a list and retrieved individually, either for viewing, modification or deletion.

The Seat Map ID will always correspond to the equipment ID according to the KASAT equipment table since the Seat Map will be directly related to the equipment assigned to the flights in the Schedule module.

Seat Maps List (KPRS/SM* )

Through this fixed command you can see the list of all Seat Maps currently created in the Host.

KPRS/SM*

Response;

Seat Maps IDs are the references to the equipment IDs of the KASAT table.

Retrieve Seat Map (KPRS/SMR/)

Through this command and using the Id number, you can retrieve the Seat Maps either for viewing or editing the details.

KPRS/SMR/<id seat>

KPRS/SMR/5
SEAT-MAP CONFIGURATION                      * KASAT=5
UPPER DECK
     C     
     3    
w>
F   iA   
E   iA   
D        
»         
C        
B   iA   
A   i*$E 
w>
     N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    <= ROW SHOWN IN AGT
     N    <= ROW HAS RBD RESTRICTIONS
MAIN DECK
     C         Y                                                           
     1    2    4    5    6    7    8    9    10   11   12   13   14   15   
w>
F    A    A$   A    A    A   iA    *    A    A$L  A   iA    A    A    A   
E    A    A$   A    A    A   iA    A    A    A$L  A   iA    A    A    A   
D              A    A    A   iA    A    A    A$L  A   iA    A    A    A   
»   =                                       =    =                       
C              A    A    A   iA    A    A    A$L  A    A    A   iA    A   
B    A    A$   A    A    A   iA    A    A    A$L  A    A    A   iA   iA   
A    A    A$  i*$   A    A   iA    A    A    A$L  A    A    A   iA   iA   
w>
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    <= ROW SHOWN IN AGT
     N    N    Y    Y    Y    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS
# RBD RESTRICTIONS
ROW  CABIN  RBD ALLOWED
  4  Y      BKY
  5  Y      BKY
  6  Y      BKY

SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  E           AVAILABLE WITH AC POWER
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  L           AVAILABLE EXTRA LEGROOM SEAT
  M           AVAILABLE TO WHEELCHAIR
  R           RESERVED FOR AIRLINE
  U           AVAILABLE TO UNACCOMPANIED MINOR
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  *           MULTIPLE OPERATIONAL CHARACTERISTICS
  +           AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS
  #           OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP
  x           DISCREPANCY IN CHECK-IN SEATMAP

After retrieving a Seat Map (KPRS / SMR), you must save the changes (KPRS / SME) or ignore it (KPRS / SMI) to free the area. Otherwise, the system will automatically release it 24 hours after it is taken or it will show the error RESTRICTED - FINISH OR IGNORE if you try to recover another Seat Map in the same work area.

Back to Top

Display an active seat map in an area(KPRS/SMV)

This command is used to re-display a Seat Map that is under creation or has been previously retrieved. If there is no active Seat Map the system response will be NO DATA.

KPRS/SMV

Response:

KPRS/SMV
NO DATA

Back to Top

Display Seat Map History (KPRS/SMH)

This command is used indicating the Seat Map ID to display the Seat Map history with all performed transactions.

Example:

KPRS/SMH/999
HISTORY - SEAT MAP [999]

KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF
    KIUHELPLL - 09MAY17/1954Z
KPRS/SME/999
    KIUHELPLL - 09MAY17/1954Z
KPRS/SMM/BS9E
    KIUHELPLL - 09MAY17/2000Z
KPRS/SME
    KIUHELPLL - 09MAY17/2000Z
KPRS/SMM/VS9A
    KIUHELPLL - 10MAY17/1956Z
KPRS/SME
    KIUHELPLL - 10MAY17/1956Z
KPRS/SMM/VS9AB
    KIUHELPLL - 11MAY17/1956Z
KPRS/SME
    KIUHELPLL - 11MAY17/1956Z
KPRS/SMD/999
    KIUHELPLL - 11MAY17/2057Z
KPRS/SMA#Y/1-8ABEF
    KIUHELPLL - 11MAY17/2057Z
KPRS/SME/999
    KIUHELPLL - 11MAY17/2058Z

Considerations

All commands performed on a Seat Map Id will be included in the history
If a seat map is deleted and a new one is created with the same id, all the complete history will be included (creation, deletion, second creation, etc.)
Agent who performed any changes will be identified indicating date and time in UTC in which they were applied
Commands performed in chronological order will be displayed from the first and the subsequent ones.

Ignore retrieved Seat Map (KPRS/SMI)

This command allows to ignore any active seat map in an area. All changed applied not saved before ignoring will be lost.

KPRS/SMI

KPRS/SMI

KPRS/SMI
OK

Back to Top

Save changes(KPRS/SME)

When editing an already created Seat Map, it is not necessary to indicate the ID or KASAT. This Id is mandatory only at the time of the first creation.

When editing, changes can be saved with the following command:

KPRS/SME

Response

OK. SEAT MAP MODIFIED KASAT CONFIG 994

Back to Top

Create a Seat Map (KPRS/SMA)

In order to create a Seat Map for seat pre-assignment from KIU RES, you must do the following entry.

KPRS/SMA#<cabin>/<row>-<row><seats>#<cabin>/<row>-<row><seats>

Example:

KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF

Description:

KPRS	Fixed command for seat pre-assignment
/	Slash
SM	Seat map indicator
A	Add indicator
#	Hash tag to split cabins
C	Cabin indicator (mandatory class)
/	Slash
1-8	Rows range in number from/to set for a cabin
ABEF	Seats/Columns seat for a cabin.
#	Hasg tag to split cabins if necessary.
Y	Cabin indicator (mandatory)
/	Slash
9-23	Rows from/ to set for a cabin
ABCDEF	Seats/Columns seat for a cabin.

Response:

SEAT-MAP CONFIGURATION                      * KASAT=NEW

    C                               Y                                                           
    1   2   3   4   5   6   7   8   9   10  11  12  13  14  15  16  17  18  19  20  21  22  23  
F   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
E   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
D                                   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
C                                   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
B   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A   A  
    N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   <= ROW HAS FREQUENT FLYER RESTRICTIONS
    Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   Y   <= ROW SHOWN IN AGT
    N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   N   <= ROW HAS RBD RESTRICTIONS
SEAT REFERENCES:
  ·           OCCUPPIED
  A           AVAILABLE
  I           AVAILABLE WITH INFANTS
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  L           AVAILABLE EXTRA LEGROOM SEAT
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  K           AVAILABLE TO OTHER RBD
  B           BLOCKED
  R           RESERVED
  P           PRE-RESERVED SEAT
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS
  #           OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP
  x           DISCREPANCY IN CHECK-IN SEATMAP

Description:

SEAT-MAP CONFIGURATION * KASAT=NEW	New Seat Map indicator.- Not yet saved or associated with KASAT
C Y	Cabin indicator
1 2 3 ...	Rows
A B C D E F	Seats/Columns
ROW HAS FREQUENT FLYER RESTRICTIONS	Rows with frequent flyer restrictions with conditions
ROW SHOWN IN AGT	Rows marked in Y are visible in the Seat Map Display from Travel agencies
ROW HAS RBD RESTRICTIONS	Rows marked in Y apply passengers booked in certain classes
REFERENCES	Seat Map References

Back to Top

Save new Saeat Map (KPRS/SME/)

Once the Seat Map creation process has begun, it will be possible to proceed with the configuration of the references and desired conditions for each row / seat. This configuration can also be done as a part of the modification of a Seat Map already created.

To save a Seat Map you must use the command indicated below, always taking into account that the Seat Map number that is assigned will correspond to the equipment number of the KASAT table to which Seat Map will be associated.

The relationship will always be one to one: a seat map for each KASAT equipment.

KPRS/SME/<KASAT equipment id>

Example:

KPRS/SME/994

OK. SEAT MAP CREATED FOR KASAT CONFIG 994

Description

KPRS	Fixed command for seat pre-assignment
/	Slash
SM	Seat map indicator
E	Indicator to save changes.(End and Save)
/	Slash
99\|4	Equipment KASAT id to which the Seat Map will be associated with the same Id number

Back to Top

Modify Rows/Seats (KPRS/SMM/)

Both at the time of creation (KPRS / SMA) and when retrieving an already created Seat Map (KPRS / SMR), it is possible to add and edit conditions and features to the different rows and / or seats of the Seat Map in which you are working.

Back to Top

Features

Use the following command in order to add features to different seats.

KPRS/SMM/<indicator><row/column/seats>

KPRS/SMM/BK<rows/seats>/<RBDs>

BK indicator uses a different format :

Back to Top

Indicator and options

Possible indicator:

WN	Window rows	Columns(A) One at a time
AL	Aisle Rows - Should indicate the subsequent column the corridor	Columns (C)One at a time
WG	Rows over the wing	Rows (10)One at a time
EX	Emergency Exit)	Row(10) One at a time
AI	Infant seats	Rows (12) Seats (1AB)
BS	Blocked seats	Rows (12) Seats (1AB)
RS	Seats reserved for airline usage	Rows(12) Seats (1AB)
NR	Non recline seats	Rows (12) Seats (1AB)
VS	Preferred Seats (VIP)	Rows (12) Seats (1AB)
LS	Extra leg rooms seats	Rows (12) Seats (1AB)
CS	Chargeable seats	Rows (12) Seats(1AB)
SHA	Seats available with viewership from travel agencies	Rows (12)
BK	Rows with restrictions according to RBD	Rows (12)

Options to indicate seats,rows or columns are :

113	Row 1 and whole Row 13
A	Column A
8	Row 8
5AB	Seats 5A y 5B
5AB6*	Seats 5A 5B y whole row 6
12A1011A	Whole Rows 1 y 10 , seats2A y 11A

Back to Top

Features combinations

Some features may be combined in the same seat and others may not be assigned simultaneously.

BS and RS can not be combined with each other
LS and VS can not be combined with each other
BS and RS can be combined with LS and VS
Last feature that is assigned will be active
If a feature is removed, the one assigned previously will be displayed
NR and AI may be combined with LS or VS
NR and AI will not be displayed if assigned to the same BS or RS seat.

Back to Top

Delete features

Also during creation process (KPRS / SMA) as when retrieving an already created Seat Map (KPRS / SMR), it is possible to delete conditions and features to the different rows and / or seats of the Seat Map in which you are working.

The command to add these features using the same indicators and concepts is the following

KPRS/SMM/<indicator>-<rows/seats>

BK indicator has a different format to delete all RBD restrictions.

KPRS/SMM/BK<rows/seats>/*

Back to Top

Possible Errors

Error	Description
CHECK ENTRY	Command format entered invalid When saving a seat map for the first time and the KASAT equipment number is missing
INVALID - CONFIGURATION/REGISTRATION ASSOCIATED	When saving a new Seat Map already associated to an equipment KASAT.
INVALID - CHECK SEAT MAP	Seat Map indicated does not exist
NO SEATS AVAILABLE	When indicating aisle or window, the corresponding columns must be indicated one at a time
NO CHANGES MADE - UPDATE OR IGNORE	When using KPRS/SME entry to save a map without any change.
INVALID - CHECK EQUIPMENT	When saving a Seat Map for the first time (KPRS / SME / kasat) indicating an incorrect / non-existent equipment id
CHECK SEATS CHARACTERISTICS	When assigning a feature to a seat / row that already has other characteristics that do not allow simultaneity
RESTRICTED - FINISH OR IGNORE	While trying to retrieve a Seat Map in a work area where there is already one active - you should save your changes or ignore

Back to Top

Seat Map Display

·	OCCUPIED
A	AVAILABLE
i	AVAILABLE WITH INFANTS
V	AVAILABLE PREFERENT/PREMIUM SEAT
L	AVAILABLE EXTRA LEGROOM SEAT
F	AVAILABLE TO FREQUENT FLYER PASSENGER
K	AVAILABLE TO OTHER RBD
B	BLOCKED
R	RESERVED FOR AIRLINE
P	PRE-RESERVED SEAT
/	RECLINE RESTRICTED
$	CHARGEABLE SEAT
w>	WINDOWS
»	CORRIDOR
=	EMERGENCY EXIT
[	WINGS
#	OCCUPPIED OR BLOCKED IN CHECK-IN SEATMAP
x	DISCREPANCY IN CHECK-IN SEATMAP

Possible Combinations

Asientos Disponibles (A L V) Combinan con Infantes (i), costo ($), no reclinable (/), no disponibles en Check-In (x)
iA	Asiento disponible para adulto con infante
L$	Asiento disponible con cargo/costo adicional con extra espacio
V/	Asiento disponible con limitaciones para reclinar y preferencial
iA$	Asiento disponible para adulto con infante con cargo/costo adicional
iL/	Asiento disponible para adulto con infante con limitaciones para reclinar y extra espacio
xA	Asiento disponible en preasignación no existe en Seat Map de Check-in
Asientos No Disponibles (F K B R P . #) Combinan con no reclinable (/), no disponibles en Check-In (x)
K/	Asiento disponibles para pasajeros en otras clases de reservas y con limitaciones para reclinar
P/	Asiento preasignado con limitaciones para reclinar
x.	Asiento preasignado no existe en Seat Map de Check-In

Back to Top

Lista de comandos

Back to Top

Item	Comando	Descripción	Ejemplo
Modificadores KPRS/SMx	KPRS/SMx *: List all A: Add M: Modify D: Delete R: Retrieve V: View I: Ignore E: End and Save changes H: History	Posibles modificadores para KPRS/SMx
Lista	KPRS/SM*	Lista de Seat Maps Creados
Recuperar	KRPS/SMR/<id Seat Map>	Recuperar Seat Map en pantalla	KRPS/SMR1
Ignorar	KPRS/SMI	Ignorar Seat Map recuperado
Visualizar	KPRS/SMV	Redesplegar Seat Map recuperado
Guardar cambios	KPRS/SME	Guardar cambios aplicados al Seat Map recuperado
Crear	KPRS/SMA#<cabina>/<fila desde>-<fila hasta><columnas/asientos>	Creación de nuevo Seat Map	KPRS/SMA#Y/1-13ABCDEFGHI
Crear Multicabina	KPRS/SMA#<cabina>/<fila>-<fila><asientos>#<cabina>/<fila>-<fila><asientos>	Creación de nuevo Seat Map con dos cabinas	KPRS/SMA#C/1-8ABEF#Y/9-23ABCDEF
Guardar creación y asociar a KASAT	KPRS/SME/<id equipo KASAT>	Guardar nuevo Seat Map asociado siempre a un equipo de KASAT El número de KASAT será el número de Seat Map Deberán crearse tantos Seat Maps como equipos en KASAT	KPRS/SME/999
Eliminar	KPRS/SMD/<id Seat Map>	Eliminar Seat Map y su relación con el equipo de KASAT	KPRS/SMD1
Historia	KPRS/SMH/<id Seat Map>	Visualizar la historia del Seat Map	KPRS/SMH/999
Modificadores KPRS/SMM/x	KPRS/SMM/x SHA: Show Agencies AI: Assign Infants CS: Chargeable Seat BS: Blocked Seat RS: Reserved Seat WN: Window (sólo a columnas) AL: Aisle (sólo a columnas) WG: Wing (sólo a filas) NR: Not Recline EX: Emergency Exit (sólo a filas) LS: Extra Leg Room Seat VS: Preferential Seat BK: RBDs restriction (sólo a filas)	Posibles modificadores para KPRS/SMM/x
Ventana	KPRS/SMM/WN<columna> KPRS/SMM/WN-<columna>	Indicar columna de ventana	KPRS/SMM/WNA KPRS/SMM/WN-A
Pasillo	KPRS/SMM/AL<columna> KPRS/SMM/AL-<columna>	Indicar columna de pasillo	KPRS/SMM/ALG KPRS/SMM/AL-G
Alas	KPRS/SMM/WG<fila> KPRS/SMM/WG-<fila>	Indicar filas sobre las alas	KPRS/SMM/WG8 KPRS/SMM/WG-8
Exit	KPRS/SMM/EX<fila> KPRS/SMM/EX-<fila>	Indicar filas de Salida de Emergencia	KPRS/SMM/EX8 KPRS/SMM/EX-8
Infante	KPRS/SMM/AI<filas/asientos> KPRS/SMM/AI-<filas/asientos>	Indicar filas/asientos aptos infantes	KPRS/SMM/AI112H13 KPRS/SMM/AI-12H
Reservado	KPRS/SMM/RS<filas/asientos> KPRS/SMM/RS-<filas/asientos>	Indicar filas/asientos Reservados	KPRS/SMM/RS3* KPRS/SMM/RS-3*
Bloqueado	KPRS/SMM/BS<filas/asientos> KPRS/SMM/BS-<filas/asientos>	Indicar filas/asientos Bloqueados	KPRS/SMM/BS5AB KPRS/SMM/BS-5A
No Reclina	KPRS/SMM/NR<filas/asientos> KPRS/SMM/NR-<filas/asientos>	Indicar filas/asientos no reclinables	KPRS/SMM/NR3* KPRS/SMM/NR-3D
Preferencial	KPRS/SMM/VS<filas/asientos> KPRS/SMM/VS-<filas/asientos>	Indicar filas/asientos Preferenciales (VIP)	KPRS/SMM/VS3* KPRS/SMM/VS-3*
Extra Leg	KPRS/SMM/LS<filas/asientos> KPRS/SMM/LS-<filas/asientos>	Indicar filas/asientos con espacio extra (Extra Leg Room)	KPRS/SMM/LS3* KPRS/SMM/LS-3*
Costo	KPRS/SMM/CS<filas/asientos> KPRS/SMM/CS-<filas/asientos>	Indicar filas/asientos con costo	KPRS/SMM/CS11DEF KPRS/SMM/CS-11E
Agencia	KPRS/SMM/SHA<filas/asientos> KPRS/SMM/SHA-<filas/asientos>	Indicar filas/asientos disponibles en Seat Map Display desde agencias	KPRS/SMM/SHA113 KPRS/SMM/SHA-113
RBD	KPRS/SMM/BK<filas>/<RBDs> KPRS/SMM/BK<filas>/*	Indicar filas con restricciones según RBD (* indica todos los RBD)	KPRS/SMM/BK113/ABK KPRS/SMM/BK113/*

[ENA]	ENABLE PRS	Number of days before flight departure when the seat pre-assignment will be available Default: 90 days before departure
[DIS]	DISABLE PRS	Number of hours before flight departure when the seat pre-assignment will be available Default: 2 hours before departure

General information

Configuration (JJPRS)

Enabling JJPRS table

Considerations:

Parameters

Designated Commands

Pre-assignment command (4G)

Inventory commands(VST)

Seat Maps

Seat Maps List (KPRS/SM* )

Retrieve Seat Map (KPRS/SMR/)

Display an active seat map in an area(KPRS/SMV)

Display Seat Map History (KPRS/SMH)

Ignore retrieved Seat Map (KPRS/SMI)

Save changes(KPRS/SME)

Create a Seat Map (KPRS/SMA)

Save new Saeat Map (KPRS/SME/)

Modify Rows/Seats (KPRS/SMM/)

Features

Indicator and options

Features combinations

Delete features

Possible Errors

Seat Map Display

Lista de comandos

KPRS - Kiu Pre Reserved Seats User

General information

Configuration (JJPRS)

Enabling JJPRS table

Considerations:

Parameters

Designated Commands

Pre-assignment command (4G)

Inventory commands(VST)

Seat Maps

Seat Maps List (KPRS/SM* )

Retrieve Seat Map (KPRS/SMR/)

Display an active seat map in an area(KPRS/SMV)

Display Seat Map History (KPRS/SMH)

Ignore retrieved Seat Map (KPRS/SMI)

Save changes(KPRS/SME)

Create a Seat Map (KPRS/SMA)

Save new Saeat Map (KPRS/SME/)

Modify Rows/Seats (KPRS/SMM/)

Features

Indicator and options

Features combinations

Delete features

Possible Errors

Seat Map Display

Lista de comandos