Search Flights
Default Type of Journey
In this section you can choose the default type of journey to show on the Flight Search page. The options are:
- One way
- Round trip
Flight Search Display Logic
This section allows to change the name and code display that the passenger uses in the Flight Search screen. If there is no configuration the information for origins and destination is taken from KIU RES bases on INNOVATA updates.
Display options might be combined with the following indicators, always considering this sintaxis
<city name> <(airport code)>, <airport name> <(airport code)>, <country name> <(country code)>
- City Name
- City Code
- Airport Name
- Airport Code
- Country Name
- Country Code
Passengers Management
Throughout this section you can select the types of passenger that will be able to book and buy. Adult passenger is the default, Child and infant are optional.
Destination Settings
Minimum booking time
In this section you will be able to configure the allowed minimum time to book a flight before the depature.
Origin and Destination
In this section you will have to configure all the routes that are offered trough the IBE. They will be completed with the following criteria:
Indicating the IATA code for the airport or city of departure and arrival
You can designate wether the route is going to be available to use in that moment or load it up for future activation
You can indicate wether that route will accept direct flight or connection flight by checking the box “direct flight only”
Indicate what will be the frequency for the flight, which days of the week will be available to book a flight and in that order the calendar will be able to show only the days that the flight is offered
Bear in mind that if a city has more than one airport, you must add the code of the city to be able to search by city.
You can allow to search by airport name, but in that case you need to add the routes by airport too. For example, for the segment Buenos Aires – New York this will be some alternatives:
BUE - NYC will search from any airport in Buenos Aires to any New York airport, the result shows passengers all the flights that exist between the airports in those cities.
EZE - JFK will search from Ezeiza airport in Buenos Aires to John F Kennedy International airport in New York, the result only shows flights operating from those airports.
EZE - EWR will search from Ezeiza airport in Buenos Aires to Newark International airport in New York, the result only shows flights operating from those airports.
BUE - LGA will search from any airport in Buenos Aires to La Guardia airport in New York, the result shows passengers all flights that exist from any airport in Buenos Aires to the specific airport in New York
Frecuency
This configuration allows to choose which days of the week the route will be displayed on the calendar of the search flight screen.
First Available Date and Last Available Date
This configuration indicates the beginning and the end of operation for the route, the dates will be displayed on the calendar of the search flight screen All loaded routes and their configurations will be registered in the “List of Origins and Destinations” lists. You can edit the data by clicking on 
or delete by clicking on 
In addition, the icon
indicates if the route is enabled. In case of clicking, confirmation will be requested to disable the route.
Texts for Flight Search Display
This sections allows editing the texts for each indicator, in other word the airline can choose the names and codes to be displayed
If no configuration is made the information for origins and destination is taken from KIU RES bases on INNOVATA updates.
The configurations can be deleted by clicking on the 
icon or edited by clicking on the 
icon.
Country Settings
In this section you can create registers to configure different sales options on IBE so that the airline can unify on the Search Flight screen all the options available for the passengers. In order to create the registers the following data must be completed
Indicator | Description | Validation |
|---|---|---|
| Description | Text display on the combo of the Flight Search Screen | 25 alphanumeric characters |
| ISO Country Code | ISO country code where the sale is made | 2 alphabetic characters |
| Currency Code | ISO currency code in which the sale is made | 3 alphabetic characters |
| Currency Name | Text display to indicate currency (not implemented) | 25 alphanumeric characters |
| Device ID | Device ID from KIU RES where the booking will be made. Please remind to send an email to webservices@kiusys.com to authorise the use of the chosen device ID. | 10 alphanumeric characters |
| User ID | User ID from KIU RES that books the reservation.NEW USER ID from the HB* command line should be used here | 9 alphanumeric characters |
| Default | Flag that display the register as available for the passenger on the Flight Search screen. | |
| Display on Flight Search | Flag that display the register as available for the passenger on the Flight Search screen. |
All registers and their configurations will be shown on the Country Settings List. You can edit the data by clicking on or delete by clicking on . In addition, the icon indicates if theregister is displayed to the passenger. The icon 
marks the register as default.
Consideration
- The first created register will replace the configuration in which the airline was creates, the first configuration is always considered as default.
- The register set as default can't be erased
- The register set as default will be the first shown on the options combo on the Flight Search screen
- Only the non-default register/s might be edited; if you wish to edit the default register, you should mark another one and the proceed to the change.
- Form of payment should be created in KIU RES for every used country and currency.
- ITR configuration must exist in KIU RES for every country used on the settings otherwise the generic configuration must exsit in order to display the .pdf for the issued e-ticket.
Country Settings Frontend Label
In this section a title/label is set for the combo shown to the passengers, if no label is added no reference will be display on the flight Search screen. The text must be configured both in Spanish and English, entering the text in each tab (ES for Spanish and EN for English), 30 alphanumeric characters are supported for this configuration.
|
Search Results
Kiu_AirShopping
This method is managed exclusively with Family Fares, the fare basis are assembled in specific categories previously configured in KIU RES (FFAM/* command line). Based on these categories, the method will present the results of availability and price combined allowing the application of all existing fare rules and fare types (One Way, Round Trip, Through Fares).
Round Trip fares for round trip itineraries are shown using the following logic: departure options will display the half price of the most economic fare available, return options will display the remaining fare.
If a Family Fare does not exist for a route or flight the airline can choose how the situation is displayed on the results grid. It might be left blank or use a free text configured in the backoffice, see configuration
Family Fares
- KIU RES Family Fare Key: you will have to enter a key that associates the information loaded in KIU RES with the different names for the Families on KIBE. If you wish to use different names for the Families between KIU RES and KIBE you can do it in this section too. (only used with KIU_Airshopping)
- Family Fares: is the name of the fare group and the one that the passenger will see in the search results of flights and prices.
- Rate conditions: these are the fare conditions that include the fare group. The conditions must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English). The fare conditions will be visible to the passenger when the course is passed over the fare group's cell.
Once the data is loaded, they are reflected in the Price Groups table where you can edit the data by clicking on or delete it by clicking on
Not Available Family Fare
Only available for Kiu_AirShopping
If a Family Fare is not available on a responde of a search you may choose what the passenger will see on the page.
- Blank: the cell for that Family Fare will be left blank
- Free Text: a 20 alphanumeric character text can be added to display on the cell.
Terms and Conditions
Information text
In this section, the text displayed in the “Terms and Conditions” link is configured in a new window. The text must be configured both in Spanish and English, entering the text in each tab (ES for Spanish and EN for English). In order for the acceptance of Terms and Conditions to be mandatory, the option YES or NO must be selected.
Sold Out Fares
In this section, you can configure how you want to show the passenger that a fare is sold out. The possible options are:
• Do not show the amount of the fare, the passenger will only see the legend Sold Out.
• Show the fare amount and Sold Out e legend.
• Show the amount but with the price crossed out and Sold Out legend.
Information text
In this section, you configure the message or information text to be displayed in the search results screen in the lower part before the summary of the amounts of fares of your selection.
Pricing simulator in Search Response screen (KIU_AirPrice method)
This configuration simulates a quotation before moving onto the purchase. If the selected fares are not combinable, and error message will be displayed to the passengaer and they will be forced to select new fares. The error message displayed is the following
Your preferred fare/s can't be combined. Please select a new combination
Passengers Information
Passengers Information
Other Contacts
Emergency contact
This option allows to include in the information form that the passenger completes an emergency contact. The contact will be included on the booking as Emergency Contact, the contact city will be the one that belongs to the first segment.
Destination contact
This option allows to include in the information form that the passenger completes a contact at destination. The contact will be included on the booking as Contact at Destination. The contact city will be the one that belongs to the destination city of the consecutive segment taking into consideration any difference above 24 hours.
Form of Identification
In this section, the types of documents that you want to give the passenger as an option are configured. You can also configure with what name you want to show the document in the form that the passenger sees when completing the data. The name must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English). These are the documents that complete the FOID (Form of Identification) field in the passenger's booking.
Special Service Requirement
SSR DOCx
In this section, you will be able to configure those routes that request SSR DOCX information, meaning that the information that will be requested in the forms will also include documentation in addition to the usual personal information. The routes will be configured by origin and destination but it could also be configured by all origins and all destinations, in order to avoid input the information per route. You can only configured those that are in the IBE, the ones that are configured on BOOKING CONFIGURATION
Bear in mind that if there is no travel documentation, in every cases, the passengers date of birth will be entered as an SSR DOB (DATE OF BIRTH)
You can select which types of SSRs DOCx to use, for example SSR DOCS for traveling documents, SSR DOCO for visa information, SSR DOCA for addresses, destinations or residency information. In addition you can configure that all de DOCS should be requested
Once you added the routes, they will be documented on the “created configurations” board, where they can be edited by clicking in the icon 
and deleted by simply clicking the icon 
Documents DOCS Settings
In this section you will learn to configure the types of documents that you wish to accept for the SSR DOCS. You can also configure which Names will be showed on the form that the passenger completes. The name must be configured both in English (EN) and Spanish (ES)
Frequent Flyer
In this section the frequent flyers program/s will be activated so that the passengers can enter their information. If configured the airline IATA code and Frequent Flyer Program Name should be entered. The settings will be displayed on the Airlines Added table where they can be edited by clicking in the icon and deleted by simply clicking the icon
Reservation summary
Taxes
In this section, you must configure the names you want to show the taxes charged to the passenger. In case they are not configured, the passenger will see the IATA codes corresponding to each tax
The code and the description of the tax or rate must be detailed. The name must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English).
Once the tax and / or rate descriptions have been entered, they are documented in the table Existing Tax Codes from where they can be deleted by clicking on the icon or edited by clicking on the icon
Fees
In this section, you must configure the names you want to show the fees charged to the passenger. In case they are not configured, the passenger will see the same codes as KIUU RES hace (TX*FEE/* table)
The code and the description of the fee must be detailed. The name must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English).
Once the fee descriptions have been entered, they are documented in the table Fees from where they can be deleted by clicking on the icon or edited by clicking on the icon