DEI210 - PLANE CHANGE WITHOUT AIRCRAFT TYPE CHANGE
The Data Element Identifier (DEI) 210 is used in the SSM messages following IATA directives on Standard Schedule Interchange Manual (SSIM).
This documentation will show you how to add and delete the DEI within KIU Schedule. The element PLANE CHANGE WITHOUT AIRCRAFT TYPE CHANGE (DEI210) is used for these situations
There is a requirement to clear customs and deplane and re-board the same physical aircraft and type
Airlines require an aircraft change en-route to the same aircraft type, ie deplane and re-board a different aircraft but of the same aircraft type
Add DEI
The DEI210 element might be added during flight creation or on a previous flight
KSEI/(origin)(destination)/A/210
Description:
Indicator | Description |
---|---|
KSEI | Fixed command |
/ | Slash |
Origin destination | Leg where a boarding point is marked, first leg cannot be marked as boarding point |
/ | Slash |
A | Addition indicator |
/ | Slash |
210 | Data identification element number |
Response:
The response is a display of the flight details including all DEI elements
KSEI/MVDSCL/A/210
CARRIER FLIGHT AEP.AEPXX-WP 1408/20JUL20
XX 27
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END
1 0001225668 01JUL2020 30JUL2020 1234567 DAILY 3 SCL SCL
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP KAM NBC CAB DIST(km) TYPE
1 SCL AEP 2300 0100+1 60 1A 5/732 3 1 1147 J
2 AEP MVD 0200+1 0400+1 120 0 5/732 3 1 220 J
3 MVD SCL 0600+1 1000+1 300 0 5/732 3 1 1366 J
DATA ELEMENT IDENTIFIER
BRD OFF (DEI)
MVD SCL 210
LEG BRD OFF # M-C AUTH BS KAM LS NG-NL LSS TSO TSC NLOS WLL LFC RMT STATUS ML
1 SCL AEP 01 Y Y 120 0 0 0 0 0 L
02 B 0 0 L
03 H 0 0 L
2 AEP MVD 01 Y Y 120 0 0 0 0 0 L
02 B 0 0 L
03 H 0 0 L
3 MVD SCL 01 Y Y 120 0 0 0 0 0 L
02 B 0 0 L
03 H 0 0 L
SCL-MVD 01 Y Y 120 0 0 0 0 0 L
02 B 0 0 L
03 H 0 0 L
AEP-SCL 01 Y Y 120 0 0 0 0 0 L
02 B 0 0 L
03 H 0 0 L
SSM Message
XXXXXXX
.XXXXXXX 221901
SSM
LT
22JUL00005E001/KIUHELPAC/22JUL
RPL XASM
XX259
23JUL20 00XXX00 1234567
J SF3 Y.Y34
MVD0500 AEP0600 7/YS
AEP0700 ROS0800 7/YS
MVDAEP 505/ET
AEPROS 210
AEPROS 505/ET
Add in previously created flight
In order to add DEI210 on a previously created flight, you need to follow the flight modification flow
Retrieve flight (KA*)
Retrieve item (KS.)
Add DE210 to the leg/s (KSEI/)
Save changes(KSAVE)
Example
KA*505
KS.1
e
KSEI/MADBCN/A/210
KSAVE
Delete DEI
DEI210 data might be deleted from the flight leg/s
Example
KSEI/MADBCN/D/210
Indicator | Description |
---|---|
KSEI | Fixed command |
/ | Slash |
Origin destination | Leg where a boarding point is marked |
/ | Slash |
D | Delete indicator |
/ | Slash |
210 | Data identification element number |
Posible error messages
Error | Description |
---|---|
| DEI210 cannot be used on the first leg, only following boarding point might be added |
| DEI element only applies for leg, not segments |