Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

 

 

 

Adding traffic manifest 

Traffic manifest is the report where cargo and mail details are specified.

At the same time, gets data from check-in and boarding of passengers and includes passenger counts, baggage counts and weight entered.

Use the following entry to display and enter data to the manifest.

 

PW4302/20APRAEP

Descripción:

PWFixed Command
4302Numero de Vuelo
/

Slash

20APRdate
AEPBoard point

Response:

FLT: 4302    BRD: AEP    THU 20APR06   REGISTRATION:  LV-KKK
STATUS    CHECK IN: OPEN      
          BOARDING: OPEN
        OFF  JMP ADT   CHD   INF  WEIGHT     BAG           LOAD    MAIL
        REL   1    7     1     2     560    13/175           10       5
        CRD   1    5     1     2     410     2/25            10       1
        USH   2    5     1     3     410     7/95             5       7
TTL LOCAL     4   17     3     7    1380    22/295           25      13
TTL DEP       4   17     3     7    1380    22/295           25      13
AVAILABLE WEIGHT    8000/ TTL WEIGHT      87/ REMAINING WEIGHT    7913
CREW:                           EXTRA CREW:
   1. LOPEZ/JOSE                          1. MARTIN/ERNESTO
   2. CASTRO/JUAN                      
   3. DANDOLA/MARIA                    
   4. LARA/CECILIA                     
   5. GERVASIO/PEDRO

Description:

FLT: 4302Flight
BRD: AEPBoard Point
THU 20APR06Date
REGISTRATION:  LV-KKK

Registration Number

STATUS 
CHECK IN: OPENPassenger Check-in Status
BOARDING: OPENPassenger Boarding Status
OFFOff Point
JMPJump Seats
ADTAdult Passenger Counts
CHDChild Passenger Counts
INFLap infant Counts
WEIGHTWeight established by the amount of passenger()
BAGPiece and weight of baggage
LOADCargo Hold Weight
MAILMail Weight
TTL LOCALTotals by leg
TTL DEPTotal by board point
AVAILABLE WEIGHTPeso disponible
TTL WEIGHTTotal weight (Takes on passenger weight, baggage, cargo hold and mail)
REMAINING WEIGHTMaximum weight for take off minus total weight
CREW:Crew
EXTRA CREW:Extra Crew

 

Use the following entry to add baggage, cargo hold and mail pieces and weight to the traffic manifest, for each flight leg (if more than one leg):

PW4302/20APRAEP/REL,BG30.450,LD1.10,ML2.15/CRD,BG25.500,LD1.10,ML01/USH,BG24.330,LD05,ML07

Response:

OK

 

Description:

PWComando fijo
4302flight number
/Slash
20APRDate
AEPBoard Point
/Slash
RELOff Point
,Slash
BGBaggage Indicator
30total baggage count
.Slash
450total baggage weight
,Slash
LDcargo Hold Indicator
1Total hold pieces
.Slash
10Total hold weight
MLMail indicator
2Mail pieces
.Slash
15total hold weight

Repeat the same format for every leg for the flight (if more than one)

Use BG indicator to manually add baggage weight additional to the weight entered at the check-in

Manifest can be edited as long as flight is not PD (flight close)

Manifest can be edited as long as flight is not closed for the affected flight leg.

In case of entering wrong data repeat the entry with the correct values. Delete a value by entering "0" for the desired indicator.

back to top

 

Editing Manifest 

Los datos de equipaje, carga y correo, ingresados en el manifiesto de tráfico, pueden ser modificados. Las modificaciones podrán ser:

  • Replace a value
  • Delete a value
  • Increase values 

Replace 

Replace a value by entering the following entry with a new value for a specific indicator.

Example:

PW3172/SLA,LD10.180

Delete:

To delete a value previously entered by entering the value zero (0) for a specific item.

Example:

PW3172/SLA,LD0.0

Modify: 

Para modificar el valor ingresado, agregando bultos y peso al valor cargado previamente, se debe ingresar el ítem con el nuevo valor y al final del peso se debe escribir el símbolo +.

To add pieces and wight to previously added item, enter the extra pieces and weight followed by a + sign.

Example to add one piece with 15 kg

PW3172/SLA,LD1.15+

Add:

Use the following entry to increase only weight to a previously added item(Enter "0" for pieces and the new weight after the "." then add a +sign 

PW3172/SLA,LD0.80+

back to top

Manifest including passenger list 

Use the following entry to display the traffic manifest and include a passenger list:

PW3148/7MAYAEP*

Use this entry to display the data on PW and list the passengers accepted on the flight 

Description:

PWFixed command
3148Flight Number
/Slash
07-mayDate
AEPBoard Point
*Indicator to display PW and passenger list

Response:

PW3148/7MAYAEP*
FLT: 3148    BRD: AEP    THU 07MAY15   REGISTRATION:  LV-SSS
SCHEDULED TIME OF DEPARTURE: 20:35
   ACTUAL TIME OF DEPARTURE: 20:35
STATUS    CHECK IN: OPEN     
          BOARDING: CLOSE
        OFF   JMP   ADT   CHD   INF     M     F  WEIGHT     BAG          LOAD      MAIL
        COR     0     9     0     0     9     0     675    40/4097       0/0       0/0   
TTL LOCAL       0     9     0     0     9     0     675    40/4097       0/0       0/0   
TTL DEP         0     9     0     0     9     0     675    40/4097       0/0       0/0   
AVAILABLE WEIGHT       0/ TTL WEIGHT    4772/ REMAINING WEIGHT   -4772
CREW:                           EXTRA CREW:
** PASSENGERS CHECKED **
 ORD  NAME                                SEAT BK OFF CODE   BOARD  FOID               
   1. PULGARIN/JUANAMRS                     1A Y  COR EGNCFP        PP 58852003
       #BT: >XX001722
   2. BOHORQUES/CLEMENTINO +                2A Y  COR EGNCFP        PP 96117946
       #BT: >XX001726>XX001727
   3. RIOS/FERNANDO MR                      3A Y  COR EGNCFP        PP 14750917
       #BT: >XX001728>XX001729>XX001730
   4. MERCHAN/PAULA                         4A Y  COR EGNCFP        PP 33383888
       #BT: >XX001731>XX001732>XX001733>XX001734
   5. GUZMAN/DIANA                          5A Y  COR EGNCFP        PP 52016859
       #BT: >XX001735>XX001736>XX001737>XX001738>XX001739
   6. MADERA/JUANA                          6A Y  COR EGNCFP        PP 70649831
       #BT: >XX001740>XX001741>XX001742>XX001743>XX001744>XX001745
   7. VESCIO/IGNACIO                        7A Y  COR EGNCFP        PP 89282802
       #BT:>XX001746>XX001747>XX001748>XX001749>XX001750>XX001751>XX001752>XX001753
   8. ORANGE/BRIGHT                         8A Y  COR EGNCFP        PP 07915773
       #BT: >XX001758>XX001759>XX001760>XX001761>XX001762>XX001763>XX001764
   9. ORTIZ/MAURICIO MR                     9A Y  COR EGNCFP        PP 77484974
       #BT:
** TRANSIT PASSENGERS**
      ORD  NAME                             SEAT BK CODE   BOARD  FOID

This entry cannot be performed once flight is PD (Flight Close)

 

back to top

 

IPORT INTERFACE

RES2 is  a ground services provider with IPORT DCS  system which provides flight control services at airports wolrdwide.featr

For airlines usig  IPORT DCS, KIU offers integration to the interface to facilitate the loading of weight and balance data.

 

Check interface information

 

 

In order to check IPORT  interface information the following entry must be made

 

 

PWD <flight> / <date> <airport of immediate destination>

 

Example:

 

 

PWD4444/27JULMDQ
XX4444/27JUL17/MDQ
Flight status: CHECK IN: CLOSE / BOARDING: OPEN
Total pax: 8+1
Paxs por Clase F: 1+1+0+0
Paxs por Clase C: 1+1+0+0
Paxs por Clase Y: 3+1+0+1
Paxs por Cabinas: A0/B0/C0
Especial info: NIL
Bags: 10Y
Weight: 60Y
BAG AV: 6.0
RUSH: 0

 

 

Description:

 

In case of not specifying the destination airport the system will answer with the following message:INVALID FLIGHT

PWD
Command
Error message
<flight>1 to 4 characters 
/Slash 
<date>DDMM 
<airport>3 letter IATA code

 in case of not specifying the destination airport the system will respond the following message:

INVALID FLIGHT

 

Interface Generation Logic

 

 

La información se podrá consultar de acuerdo a los estatus del Check-in y Boarding del vuelo (PC) teniendo en cuenta la siguiente lógica

The information will be available according to Check-in and Boarding Flight (PC) status ,considering the following logic

 

CHECK-IN
BOARDING
¿PWD available?
Error message
OPENOPENNO
CHECK STATUS
CLOSEOPENSI 
CLOSECLOSESI 
OPENCLOSESI 
SUSPENDEDOPENSI 
SUSPENDEDCLOSESI 

 

 

INTERFACE

 

This interface is validated with the carrier and IPORT . It is based on the information that can be taken from check-in commands PC,PW and PZ.

hi

<FLIGHT> / <DATE> / <IMMEDIATE DESTINATION AIRPORT CODE>
-Total pax: <AMOUNT PSGR (ADT + CHD)> + <INF>
-Flight status: CHECK IN: + status / BOARDING: + status
-Pax Class F: <number of male paxs> + <number of female paxs> + <number of  CHD paxs > + <number of INF paxs>
-Pax Class C: <<number of male paxs> + <number of female paxs> + <number of  CHD paxs > + <number of INF paxs>
-Pax Class Y: <number of male paxs> + <number of female paxs> + <number of  CHD paxs > + <number of INF paxs>
-Paxs by Cabins: <ZONE n> <AMOUNT OF PSGR> / <ZONE n> <AMOUNT OF PSGR> / <ZONE n> <AMOUNT OF PSG> / etc.
-Special info: NIL or <QUANTITY OF SSR> <CODE SSR> / <AMOUNT OF SSR> <CODE SSR> / <AMOUNT OF SSR> <CODE SSR>
-Bags: <AMOUNT> <CABIN F> / AMOUNT> <CABIN C> / AMOUNT> <CABIN Y>
-Weight: <QUANTITY OF KILOS> <CABIN F> / <QUANTITY OF KILOS> <CABIN C> / <QUANTITY OF KILOS> <CABIN Y>
-BAG AV: <total weight of bags / quantity of bags units>
-RUSH: <number of units of bags arriving and dispatched from the destination airport>

 

 


es include the online m

anagement information reporting tool, flight messaging, and flight control with its smart flight monitor tool. 

Data Shipping

Automated

Automated data shipping extracts information from the JJCHK table applying the Interface generation logic 

Manual

Manual data shipping supports up to five email addresses.


PWD <flight> / <date> <airport destination> - <email>, <email>

Example:

PWD419/19SEPMIA-AIRPORTS@MAIL.COM,SUPPORT@MAILCOM

 

 

 

 

Error messages

 

Command
Mensaje de Error
Solucion
PWD <flight> / <date> <airport of immediate destination>INVALID - CHECK REGISTRATIONCheck if zones are missing and add them to OAC.
PWD <flight> / <date> <airport of immediate destination>INVALID FLIGHTCheck if year is missing
PWD <flight> / <date> <airport of immediate destination>INVALID FLIGHT

Check if arrival airport must be specified

PWD <flight> / <date> <airport of immediate destination>CHECK STATUS

While CHECK IN OPEN and BOARDING OPEN ,PWD command cannot be performed.

 

 

 

 

 

 

 

 

  • No labels