Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

 

 


INTRODUCTION

The concept of OB FEE refers to administrative charges that can be defined and charged, for the airline and / or travel agency, in the issuance of electronic tickets.


OFF FEE TYPES

OB is the identifier code IATA gives administrative or extra charges on ticket issuances.

There are 3 types of OB FEES(charges):

 

  •  Type T - Ticketing  Fee
  •  Type F - Form of Payment Fee
  •  Type R -Requested Service Fee (functionality not implemented)

 

Considerations:

  • The use of the FEE OB within the airline is configured from the JJETKT table of each country under the OB FEE [OBF] parameter .If the indicator is in N (NO) it means that the airline can not apply, nor can configure the collection of FEEs. If it is in Y (YES), the airline can configure the FEEs to be charged at the time of ticket issuance.

 

  • The use of the FEE OB will allow the airline to charge one or more values for the following reasons:

           Type T: Ticketing Fee. A fee is charged for ticket issuance. The value can be with a single amount or a percentage on the Net Fare.

          Type F:  Form of payment fee . It can be charged only when the type of payment is with a credit card or Debit. The value can be with a single amount or a percentage of the total.

        

  • Ticketing  with FEES can be automatic or manual. If automatic mode was applied, the system will take the values defined in the table TX * FEE / *

  • OB FEES are charged only for each new issue and are not reimbursable.

  • OB FEE charges do not apply to the fare mask, that is, they can not be used in the pricing of unpublished rates.

 

 

Configurations


To configure the usage of the charges, the OB FEE parameter of the JJETKT / COUNTRY table of the airline must be in Y (YES). If the parameter is in N (NO), pricing and ticketing may not include FEE
The activation will enable the messages when pricing an itinerary. The messages that can be presented are the following:

 

AIRLINE FEES INCLUDED: when OB charges are included in fare quote

 

AIRLINE FORM OF PAYMENT FEES MAY APPLY: when the use of OB is active but the payment method has not been detailed.

 

PRICED WITH VALIDATING CARRIER XX: when the use of OB is active


MANIPULATION OF FEES : when the use of OB has been manipulated and modified manually


 


DISPLAY AND CONFIGURATION OF THE OB FEE TABLE

The command to display the table is:

Code Block
languagexml
themeFadeToGrey
TX*FEE/*

 

 

The data that set up the table are the following:

 

Code Block
languagexml
themeConfluence
ITEM

Indicates the item number, or position, of the FEE in the table.

Code Block
languagexml
themeConfluence
CODE

Indicates the OB FEE code. It is composed of a fixed format with 5 alphanumeric characters defined in the following way:

  • Code: OB (Fixed component)
  • Sub-code:
    F: Form of payment Fee
    T: Ticket fee the fee will be charged regardless of the form of payment.

  • Identifier: the indicator that identifies the FEE is two alphanumeric characters.


    Example: OBT01; OBF08

 

Code Block
languagexml
themeConfluence
FOP

It is used only when applying a form of payment fee and has two components:

TYPE: Type of Payment

            CC: credit card (CC - Credit Card)

            DC: debit card (DC - Debit Card)

The identifier is FT (Form of payment Type) followed by the type of card. It must contain 2 alphabetic characters.

Example: / FTCC / FCVI

 

CODE:  Card Code, supports 2 to 4 characters. The identifier is FC (Form of payment Code) followed by the card code

 

Example: / FTDC / FCMA

 

Code Block
languagexml
themeConfluence
EXCH

Application indicator of the FEE in an exchange. This field is optional but if the input is omitted, the value by default will be that a new FEE will not be charged during an exchange transaction.
The identifier in the command is EX and must be followed by the Y (YES) or N (No) parameter to indicate whether the system must charge a new FEE during the exchange.

 

Example: / EX Y

The system logic works as follows depending on how the FEE is configured with the option YES or NO with respect to the exchange. If the exchange is set to NO, it means that at the time of performing the exchange, a new FEE for the issuance of the new ticket will NOT be charged.

So that the system does not charge the FEE, the new itinerary must be priced  with the WS * FEX command and then follow the normal process of the exchange  besides having the option in NO,

If this option is not used and WS  only is used  instead, when attempting to pass step 3 of the exchange a message alerting  PRICE DISCREPANCY will  warn you and will not allow to finish the process. 

To continue, the process of the exchange, price the itinerary again with the WS * FEX command and then start again the exchange

If the exchange is configured in YES, it means that a new FEE will be charged at the moment of performing the exchange for the issuance of the new ticket. The itinerary can be priced both with the WS command and with the WS * FEX command. Then you should follow the normal steps of the exchange and the system, in step 3,inform that the amount corresponding to the FEE must be paid for the exchange of the ticket.

 

Code Block
languagexml
themeConfluence
RFND

This functionality is not yet implemented. It will allow to establish if a charge allows to be reimbursed or not.

 

Code Block
languagexml
themeConfluence
TRIP

Indicator of the type of trip. This field is optional, but if your entry is omitted, the system will assume that the FEE that is being configured and should be applied in both types of trips: Domestic and International.

The options are:

  •  D: domestic trip
  •  I: international trip

 

The identifier in the command is TR and must be followed by the indicator of the type of trip on which the FEE applies.

 

Example : TR I

In case of entering a travel type indicator different from D or I, the system will respond with the following error message:

INVALID - TRIP INDICATOR MUST BE D OR I

 

Code Block
languagexml
themeConfluence
PAX

 

Passenger type indicator. This field is optional, but if your entry is omitted, the system will assume that the FEE that is being configured will apply to all  passengers types.

The options are:

  •  A: adult
  •  C: child / minor
  • I: Infant

 

The identifier in the command is PX (represents the word PAX) and must be followed by the type of passenger on which the FEE will apply.

 

Examples;.

 

/ PXAC (FEE applies to adult and child tickets)
/ PXA (FEE applies to adult tickets)

 

In case of adding an indicator other than A, C or I, the system will respond with the following error message :

INVALID - CHECK PAX TYPE

 

Code Block
languagexml
themeConfluence
CH

 Sales channel indicator where the FEE will be charged. This field is optional, but if the entry is omitted, the system will assume that the FEE that is being configured will always apply, regardless of the sales channel.

Options are:

  • Host
  • Agencies

The identifier in the command is CH (represents the word CHANNEL) and must be followed by the indicator of the sales channel where the FEE will be charged.

 

Example

/ CHA (FEE applies to tickets issued in travel agencies)
/ CHHA (FEE applies to tickets issued on the host and travel agencies)

 

In case of adding an indicator other than H or A, the system will respond with the following error message:

INVALID - INCORRECT SALES CHANNEL

 

Code Block
languagexml
themeConfluence
WW

Options are:

  •  H: Host (Airline Website)
  • A: Agency (Agency Website)

The command indentifier is WW and must be followed by the indicator of the sales channel where the fee will be charged

 

/ WWH (the FEE applies to the tickets issued on the airline's website)
/ WWA (the FEE applies to the tickets issued on travel agencies websites)

.

To remove the channels entered you must use WWN (remove the 2 channels)

 

In case of adding an invalid indicator, the system will respond with the following error message:

INVALID - INCORRECT SALES CHANNEL

 

Code Block
languagexml
themeConfluence
ITIN

 

This functionality is not yet implemented. It will allow to establish charges with different values by itinerary type: One Way, Round Trip or Open Jaw.

 

Code Block
languagexml
themeConfluence
AMOUNT / PERCENTAGE

This indicator is used to define if the FEE will have a fixed amount or will be a percentage of the fare. This indicator is mandatory in the command.

The possible forms of FEE application are:

  • Fixed amount
  •  Percentage

Fixed Amount: the identifier in the command is AM (represents the word AMOUNT) and must be followed by the currency and the value to charge.

Example /AMUSD15

In case of adding an invalid indicator, the system will respond with one of the following error messages :

INVALID AMOUNT

or

INVALID CURRENCY

Percentage: the identifier in the command is PC (represents the word PERCENTAGE) and must be followedby the percentage value. The maximum value that can be entered as a percentage is 99

 

Example /PC10

In case of entering an invalid indicator the system will respond with the following error message:

INVALID AMOUNT

 

 

Code Block
themeConfluence
PRICING DATE

This indicator is used to establish the pricing dates in which the FEE charge will apply. This field is optional and, if the entry is omitted, the system will assume that the FEE that is being configured will always be collected (assumes all dates in order to OPEN system - OPEN).

EFF: effectiveness of application, the identifier is PE (Pricing Effectivity) followed by the date

DIS: Application discontinuity, the identifier is PD (Pricing Discontinuity) followed by the date. The date format is DDMMMAA. If you wish to indicate that the FEE does not have a discontinuity date, the word  OPEN on the PD must be added.(Pricing Discontinuity)


Example /PE12JUN13/PDOPEN

In case of adding an invalid indicator the system will respond with the following error message:

INVALID - CHECK DATE

 

Code Block
languagexml
themeConfluence
POINT OF SALE

This indicator is used to establish the Point of Sale where the FEE will be charged. The configuration applies according to the country of sale. This field is Optional and if omitted applies to all (YY is the indicator that covers all countries).

The identifier in the command is PP (represents the words Point of Pricing) and must be followed by the indicator of the country where the FEE will be charged

The options can be:

  •  one country (Ex .: UY)
  •  all countries (Ex .: YY)
  •  all except one country (eg: XAR) (an X must be placed in front of the country code to indicate the exeption)

 

Example ; /PPAR o /PPYY o /PPxUS

 

In case of adding an invalid indicator the system will respond with the following error message:

CHECK COUNTRY CODE

 

Code Block
languagexml
themeConfluence
FIRST DEPARTURE :

 

This indicator is used to establish the Country of Departure, or beginning of the ticket itinerary, from which the FEE will be charged , that is, only the FEE will be collected if the itinerary starts at an airport in the indicated country.This field is optional and if omitted applies to all (YY is the indicator that covers all countries).

 PF (represents the words Point of First Departure) is the identifier in the command and must be followed by the country code of beginning of the itinerary, from which the FEE will be charged.

 Options can be:

  • one country (Ex .: UY)
  • all countries (Ex .: YY)
  • all except one country (eg: XAR) (an X must be placed in front of the country code to indicate the exeption)

Example:   /PFAR o /PFYY o /PFxUS

In case of entering an invalid indicator the system will respond with the following error message:

 

CHECK COUNTRY CODE

 

Code Block
languagexml
themeConfluence
LAST ARRIVAL:

 

This indicator serves to set the Country of Arrival  from which  the FEE will be charged.The FEE will only  be charged if the itinerary ends at an airport in the indicated country. This field is optional and if omitted applies to all (YY is the indicator that covers all countries).

PL (represents the words Point of Last Arrival)is the identifier in the command and must be followed by the country code of completion of the itinerary, from which the FEE will be charged.

The options can be:
OB FEE

  • one country (Ex .: UY)
  • all countries (Ex .: YY)
  • all except one country (eg: XAR) (an X must be placed in front of the country code to indicate the exeption)

 

Example:     /PLAR o /PLYY o /PLxUS

In case of entering an invalid indicator the system will respond with the following error message:

CHECK COUNTRY CODE

 

 

Code Block
languagexml
themeConfluence
DESCRIPTION

This indicator is used to define the name and description of the FEE charge. It is a mandatory free text field that accepts from 1 to 30 characters .

NM is the identifier in the command (represents the word NAME) and must be followed by the informative text.

 

Example /NMTICKETING FEE

 

 

 

 

Code Block
languagexml
themeConfluence
ELIGIBILITY

This indicator allows defining if the FEE should be applied to the ELIGIBILITY discounts of the Fare Basis when pricing. These discounts will only apply when the FEE is a fixed amount, ie adding eligibility discounts will not be accepted when the FEE is a percentage; in this case the system will respond with the following error message

INVALID - ELIGIBILITY INDICATOR NOT ALLOWED

EL (represents the word ELIGIBILITY ) is the identifier in the command and must be followed by the discount code defined in the fare rule and then the corresponding  percentage.  It will be possible to add up to 5 types of eligibility. If more than one type of eligibility is added it  should be separated with a "comma

The payment percentage value to be added must be between 0.00 and 100.00 (accepts decimals).

Example:  /ELDC50 o /ELDC50,F130

In case of adding an invalid indicator the system will respond with the following error message:

INVALID - CHECK ELIGIBILITY INDICATOR

 

Note:
When two fare basis are combined and  have different eligibility  discount , the FEE value  will be calculated considering the lowest of the eligibility discounts.

 

Code Block
languagexml
themeConfluence
OFFICE RESTRICTION

 

This indicator allows for the same rule to use different collection criteria according to the Office where the FEE is priced. The Office can be Host or Travel Agency. It also allows you to set discounts from the eligibility indicator.

OR is the identifier in the command and the options are executed once the FEE rule is created:

 

ADD

Code Block
languagexml
themeFadeToGrey
TX * FEE / OR- <item> / A / <Office Id / <currency> <amount> / EL <discount code> <percentage>

 

 

Example

TX*FEE/OR-1/A/MIA00XX4/USD3.59/ELSD35
TX*FEEFixed command
/Slash
OR-1Office Restriction indicator and item number of the TX * FEE / * table
/Slash
AADD action indicator
/Slash
MIA00XX4Office ID
/Slash
USD3.59

Currency code and amount, the system will control that the matches with the rule unless
it is a percentage FEE .

/Slash
ELSD35Eligibility Indicator with code and percentage (Optional)

 

DELETE

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / OR- <item> / D / <Office Id>

 

Example 

TX*FEE/OR-1/D/AEP00XX4
TX * FEE
Fixed Command
/
Slash
OR-1Office Restriction indicator and item number of the TX * FEE / * table
/Slash
DDelete action indicator
/Slash
AEP00XX4Office ID

ADD AN OB FEE

In this section we will detail the ways in which an FEE charge can be configured in the system.

In order to create a FEE code the mandatory indicators described in the OB FEE Visualization and Configuration table must be entered after the FEE code entry in all cases. The order of the indicators is indistinct.

 

TICKETING FEE


Next, we will explain the two ways in which an ticketing fee charge can be configured.


The options are:

  • Fixed amount
  • Percentage


Fixed amount

The basic command to add a Ticketing fee with a fixed amount is as follows:


 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / AM <currency> <value> / NM <FEE name>


Example;   :

TX*FEE/A-OBT01/AMUSD10/NMTICKETING FEE


Note that when adding an Ticketing FEE the code indicator must be a T

(Ticketing Fee). Example: OBT01


Next, the structure of the command to add a ticketing fee  with a fixed amount will be detailed and with all the mandatory and optional indicators,:


 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / TR <travel type> / PX <passenger type> / CH <channel
sales> / AM <currency> <value> / PE <date> / PD <date> / PP <country of sale> / PF <country of departure> / PL <country of
arrival> / NM <FEE name>


Example

TX*FEE/A-OBT01/TRDI/PXAC/CHHA/AMUSD15/PE12AUG13/PD31DEC13/PPAR/PFAR/PLYY/NMFEE ARGENTINA

 

Percentage 

The basic command to add a ticketing fee with a percentage is as follows:

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / PC <value> / NM <FEE name>

Example

TX*FEE/A-OBT01/PC8/NMTICKETING FEE

Next, the structure of the command to add a ticketing fee with a percentage will be detailed and with all the mandatory and optional  indicators:

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / TR <travel type> / PX <passenger type> / CH <channel
sales> / PC <value> / PE <date> / PD <date> / PP <country of sale> / PF <country of departure> / PL <country of
arrival> / NM <Fee name>

 

Example:


TX*FEE/A-OBT01/TRDI/PXAC/CHHA/PC5/PE12AUG13/PD31DEC13/PPAR/PFAR/PLYY/NMTICKETING FEE

 

FORM OF PAYMENT FEE

 

Next we will explain the two ways in which a form of payment FEE can be configured.

 The options are:

  • Fixed amount
  • Percentage

Fixed amount

The basic command to add a form of payment fee used to pay the ticket is:

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / FT <card type> / FC <cod. of card> / AM <currency> <value> / NM <FEE name>

 

Example

TX*FEE/A-OBF09/FTCC/FCVI/AMUSD8/NMVISA FEE

Note that when adding a form of payment FEE the indicator of the code must be an F (Form of payment).

 

Example: OBF09

Next, the structure of the command to enter a form of payment fee with a fixed amount and with all the mandatory and optional  indicators:

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / FT <card type> / FC <card code> / TR <travel type> / PX <type of
passenger> / CH <sales channel> / AM <currency> <value> / PE <date> / PD <date> / PP <country of sale> / PF <country
of exit> / PL <arrival country> / NM <FEE name >

 

Example:

 

TX*FEE/A-OBF01/FTDC/FCEL/TRDI/PXAC/CHHA/AMUSD15/PE12AUG13/PD31DEC13/PPAR/PFAR/PLYY/NMFEE VISA ELECTRON

 

Percentage

The basic command to add a form of payment fee with a percentage is as follows:

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / FT <card type> / FC <card code> / PC <value> / NM <FEE name>


Example

TX*FEE/A-OBF03/FTCC/FCIK/PC5/NMFEE MASTERCARD

 

Next, the structure of the command to add a form of payment fee with a percentage and with all the mandatory and optional  indicators

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / A- <code> / FT <card type> / FC <card code> / TR <travel type> / PX <type of
passenger> / CH <sales channel> / PC <value> / PE <date> / PD <date> / PP <country of sale> / PF <country of
departure> / PL <arrival country> / NM <FEE name>

 

Example

TX*FEE/A-OBF02/FTDC/FCMA/TRDI/PXAC/CHA/PC5/PE12AUG13/PD31DEC14/PPAR/PFAR/PLYY/NMFEE MAESTRO

 

DELETE AN OB FEE

To eliminate a fee already added you must first display the table with all the already created FEES and then execute the following command:

 

Code Block
languagexml
TX * FEE / D- <item number>

 

Example:

TX*FEE/D-6
TX*FEEFixed command
/Slash
DDelete action indicator
-hyphen
6OB fee item number to delete

 

MODIFY AN OB FEE

To modify a fee already added , you must first display the table with all the already created FEEs and then execute the following command:

 

 

Code Block
languagexml
themeFadeToGrey
TX * FEE / M- <item number> / TOKEN <new value> / TOKEN <new value> / TOKEN <new value>

Examples

 

TX*FEE/M-1/TRI/PXCI

TX*FEE/M-2/ELDC30,ST60

TX*FEE/M-1/PC5/NMFEE MASTERCARD

 

Considerations

 

  • It is not possible to modify the application of a FEE from Fixed Amount to Percentage and vice versa; before that situation, the FEE must be deleted and reinstated with the desired application.

  •  At the moment of pricing an itinerary, the system will apply all FEE charges that correspond according to how they have been aded into the table.

  • The system will control that two identical FEE codes are not added in the table. If any of the parameters of the table differs it will be possible to add it. In case of entering a repeated code, the system will return the following error message:   INVALID - FEE CODE ALREADY EXISTS. VERIFY

 


PRICING AND TICKETING with OB FEES

When pricing an itinerary you will be able to get OB FEEs in automated or manual way. Automated pricing reads configured parameters from the TX*FEE/* table ,but you can also handle the amounts or percentages during pricing.

 

AUTOMATED PRICING WITH TICKETING OB FEES

When pricing an itinerary with the basic  "WS" command , the system takes the T type codes (Ticketing FEE ) added in the TX * FEE / * table. The FEE column and the messages mentioned are also added in the configurations section.

 

Description:

 

AIRLINE FEES INCLUDED:This message will be displayed when OB Ticketing FEEs are configured.
AIRLINE FORM OF PAYMENT FEES MAY APPLY:

This message will appear when there is at least one configured  FEE and that no form of payment fee  (eg WS * F / VI) has been priced

In general when you perform the "WS" pricing command

PRICED WITH VALIDATING CARRIER XX:

This message indicates the validating airline that was considered for pricing since the FE

FEE depends on the airline that will be used to issue the ticket.

 

When you display the complete fare quote, a new line is displayed below the total fare and taxes,the addition of the collected  FEE and immediately after the general total, that is, the total amount of the Fees, Taxes and Fees.

 

 

To view the pricing details containing the collected OB fees you must execute the following command:

 

Code Block
languagexml
themeFadeToGrey
WW/OB

 

 

When entering the WW / OB command, the details of the listed FEE OBs are displayed:

 

CODECode established in the table TX * FEE / *
AMOUNTAmount in the e-ticket payment currency
DESCRIPTIONCommercial name of the FEE established in the table TX * FEE / *

 

AUTOMATED TICKETING WITH TICKETING FEE (T TYPE)

 

Ticketing is done with the usual commands.E-ticket records will display all the respective OB fee data.

 

OB FEE AUTOMATED PRICING WITH FORM OF PAYMENT FEE (TYPE F)



To automatically price the FEE by form of  payment method, you must configure the different charges for each type of card in the TX * FEE / * table with the necessary data. Once the data is added into
the table, you must indicate in the pricing command the payment method that will be used ,so as to know the value of the charge that applies to the card with which the ticket will be paid.

 

To price and find out what the charge is for using any type of card, you must use the following command:

 

 

Code Block
languagexml
themeFadeToGrey
WS * F <form of paymentindicator> <card type>

WS*FFIXED COMMAND TO PRICE WITH AN OB FEE
FORM OF PAYMENT INDICATOR

Credit Card Indicator is "/" (bar) and Debit is "."
(Point)

CARD TYPE

Code that indicates the type of credit or debit card that is
will use to pay the ticket.

Example

WS*F/VI o WS*F.EL

 

This command will price according to the configured parameters, applying the value or percentage that has been indicated in the table for that specific credit or debit card.

Here is an example of an itinerary that will be paid with the American Express credit card (priced  with the WS * F / AX command); then when asking for a detail of the fees  that will be collcted by
the use of such card (WW / OB) we find out that an extra of 7.50 will be charged corresponding to the ticketing  fee imposed for American Express:

 

TICKETING WITH A FORM OF PAYMENT FEE

 

To issue a ticket including a Form of Payment FEE, you must use the usual command for both  credit card or debit card.


To visualize a ticket issued with the detail of the collected OB FEE charge, the following must be entered command:

 

 

 

Code Block
languagexml
themeFadeToGrey
ET/2/OB

Example

 

 

PRICE WITH A FEE AND TWO FORMS OF PAYMENT.

In the command, the codes of the credit or debit cards that are to be used in ticket issuance . Below the description

Code Block
languagexml
themeFadeToGrey
WS * F <form of payment indicator> <card type> # / <form of payment indicator> <card type> -
<amount fare> / <amount tax>

 

 

 

WS*FFixed command to price with a fee
FORM OF PAYMENT INDICATOR

Credit Card Indicator is "/" (bar) and Debit is "."
(Point)

CARD TYPE

Code that indicates the type of credit or debit card that is
will use be used to pay

#Fixed command to split forms of payment.
FORM OF PAYMENT INDICATOR

Credit Card Indicator is "/" (bar) and the debit is "."
(Point).

CARD TYPE

Code that indicates the type of credit or debit card that is
will use to pay.

-Hyhpen
FARE AMOUNTNet fare amount of the second form of payment.
/Slash
TAX AMOUNT

Taxes/fees amount to pay with the second form of
payment.

Examples

WS * F / AX # / VI-100 / 54.15XT
WS * F.EL # AX-900 / 0XT
WS * F.EL # MA-1500 / 78XT

 

This command will price according to the configured parameters and the values that have been indicated in the table for each of the cards. In case these values are fixed amounts, the amount will apply
corresponding to each of the cards.

Example

 

TICKETING WITH A FEE AND TWO FORMS OF PAYMENT

To issue a ticket including the form of payment FEE, the command to use is the the same as ticketing with two form of payments

If at the time of ticketing with two different cards, the order  is reversed with respect to the order in which they were indicated at the time of the pricing the system will allow the issuance, as long as the percentage of FEE that applies to the type of card is the same, otherwise the system will respond with the following error message:

INVALID - PRICE DISCREPANCIES

 

,See example below

 

WS*F/VI#/AX-200/0XT

WK*F/AX42424242424242/1218/Z1234#/VI4242424242424242/0215/Z122222-200/0XT

 

In case that ticketing involves a fixed amount FEE the process will continue even if the order of the cards is reversed in the command.

 

 

PRICING AND TICKETING AND OB FEE IN MANUAL MODE

 

MANUALLY ADD A FEE

This function allows you to add new FEES, which will be added to those already established automatically by means of the  TX * FEE / * table. The maximum amount of FEES to add is 3 . In case of adding  more than 3 different FEES, the system will respond with the following error message:

TOO MANY ITEMS

Those tickets issued by Travel Agencies, in which the OB FEE charges have been handled, will be sent to queue HDQ188 (ETKT - TAXES MODIFIED (TRAVEL AGENCY).

The command to manually force and add a  new FEEs is:

 

 

Code Block
languagexml
themeFadeToGrey
WS * OB + <amount> <FEE subcode>, <FEE name> / <amount> <FEE subcode>, <name
FEE> / <amount> <FEE subcode>, <FEE name>


Description

WSFixed command
*asterisk to split components when pricing
OBOB FEE indicator
+Sign to add a fee
AMOUNTFee Amount

SUBCODE

Fee Subcode that allows 3 characters where the first one can only be T or F and the next two alphanumerics. Example: T09
,Mandatory coma that separates the value of the code name
FEE NAMEName or description given to the FEE
/

Mandatory slash in case of adding other FEEs so as to differentiate them.

(…)The rest of the FEEs are added with the same syntax

 

When pricing when if manually adding the a FEE, the" MANUAL MANIPULATION OF FEES legend "message  will appear.

 

When viewing the manual pricing details , with the command that displays the details of the FEE charges,it will be possible to visualize that to the automatic FEEs, the entered ones are added manually by command:

 

Example

EXCEPT A FEE

It is possible  to exempt the FEEs established automatically in the TX * FEE / * table so that that they are not collected. The execution of this action will exempt the collection of all FEEs. The command is:

 

Code Block
languagexml
themeFadeToGrey
WS*OBEX
WSFixed command
*asterisk to separate components when pricing
OBOB FEE indicator
EXIndicates the exception

 

When excepting the FEE charge, the FEE column will be with value 0.00 and the message AIRLINE FEES INCLUDED will no longer be displayed.


Those tickets issued by Travel Agencies in which the FE FEE charges have been handled will be sent to queue HDQ188.

Example

 

 

TICKETING WITH MANUAL OB FEE PRICING

When ticketing any additional parameter can be added to the ticketing entry

Example

 

WK*OB+5F09,FEE CASH PAYMENT/10T10,ARRIVAL AT MDQ/13T08,FEE EXTRA*FCA

WK*OBEX*FCA

 

The electronic ticket will be displayed with the FEEs added or deleted as appropriate. When displaying the detailed electronic ticket will also identify each of the FEE.

Example


 

 

When the FEEs are exceptedexempted, the electronic ticket is shown without the values of any FEE:

Example

ELECTRONIC TICKET DISPLAY WITH FEE DETAIL

 

To visualize the electronic ticket with the detail of the OB FEE charged, the indicator / OB must be added behind the usual ticket display commands.

Code Block
languagexml
themeFadeToGrey
ET/2/OB

Example: ET/2/OB

 

Code Block
languagexml
themeFadeToGrey
ET / <ticket number> / OB

 

Example:

As in the quote, the details of the OB FEE charged are added.

 

TICKET PRINTING WITH OB FEE

To print the e-ticket receipt that contains FEE charges, you must use the same  commands as any other ticket.

 

Code Block
languagexml
themeFadeToGrey
ITR / <line number>

 

Example   ITR/2

 

Code Block
languagexml
themeFadeToGrey
ITR / <ticket number>

 

The ticket will be displayed with the FEE values charged and will be detailed below the total of the fare.

 

Example  ITR/9998000000796

SENDING A TICKET WITH OB FEE BY E-MAIL

To send proof of a ticket containing FEE charges by email, you must use the usual commands used to send a ticket via email without FEE charges:

 

 

Code Block
languagexml
themeFadeToGrey
ITR / <line number> - <email address>

Example: : ITR/2-DIRECION@DOMINIO.COM

 

Code Block
languagexml
themeFadeToGrey
ITR / <ticket number> - <email address>

Example:   ITR/9998000000796-DIRECION@DOMINIO.COM 

 

EXCHANGE WITH An OB FEE

In order to apply an OB FEE charge in an exchange, it must be configured in the TX * FEE / * table.

In the TX * FEE / * table it must  indicated if a new FEE will be charged in the reissue of the ticket or not (See Visualization and Configuration of the  OB FEE Table - EXCH Section Pag. 3)

There is a new way to price so that the system considers the collection  of OB FEE charges in an exchange transaction. The command is:

 

 

Code Block
languagexml
themeFadeToGrey
WS*FEX

 

This command allows the system to know whether or not to price OB FEE charges, as well as how to price them. Depending on the case, the processes for performing an exchange considering the FEE collection is different,
Below, different scenarios will be described to understand how exchanges work with both  Ticketing and Form of Payments FEES.

 

EXCHANGE  OPEN FOR USE COUPONS AND TICKETING FEES WITH FIXED AMOUNT

The procedure is normal, the system will automatically take the applicable Ticketing  FEEs according to the configuration of the TX * FEE / * table. The itinerary pricing  regardless of the payment method must always be done with the command: WS * FEX

 

EXCHANGE OPEN FOR USE COUPONS AND TICKETING FEES WITH PERCENTAGE

Before proceeding with the reissue, it must be known what the value of the difference to be paid is.You must apply the Form of payment FEE with percentage 

 

To obtain this value we recommend following the following steps:

  • Begin a regular exchange process WK * FEX
  • Reach the third mask of the process and take the TOTAL A / C value

 

It is important to take this value and not the GRAND TOTAL value, since the latter includes a FEE amount.
-

Ignore the exchange process

Once the value of the difference to be paid without FEE has been obtained, the PNR must be priced with the new itinerary indicating the form of payment to use, in this way the system can correctly calculate correctly which is the percentage of FEE receivable

 

The pricing command will be the following

 

 

Code Block
languagexml
themeFadeToGrey
WS * FEX # <payment method indicator> <card type> - <value of fare difference >

Example:

WS*FEX#/VI-450 o WS*FEX#.EL-890


All quotes of this type will include the following message so that the applicable values can be checked.

* EXCH INCLUDES FEE PERCENTAGE - PLS VERIFY AMOUNTS **

Example

 

Finally, the exchange should be carried out regularly and taking into account that the form of payment of the difference must match the one previously priced; otherwise the system will respond with the
following error message: INVALID - PRICE DISCREPANCY

 

REPORTS

The FEE will be reflected in the following reports under a new column called FEE.

Example

The FEE column will also be displayed in the  WA *, WL reports and its variants, WQ and its variants and WR and its variants.

 

It can also be displayed in all the variants of the detailed DQT* report.

Similarly, travel agencies that have related branches can view the WG reports with the FEE column. Also available for WG commands executed by the carrier.

 

 

HISTORY

To visualize the complete history of the FEEs table the command is:

Code Block
languagexml
themeFadeToGrey
TX*FEE/*H

The system will display a list with all the OB FEES that have history distinguishing in the CODE column the codes of each position and in the LAST UPDATE column the date and zulu time  of the last one will be detailed modification.

 

To visualize the history of a particular FEE, the following command should be executed.

 

 

Code Block
languagexml
themeFadeToGrey
TX*FEE/*H/

Example:

 

Code Block
languagexml
themeFadeToGrey
 TX*FEE/*H/T20

 

All creations, modifications and deletions will be recorded in the history. The display shows the previous configuration and the command used for the modification detailing: user, date and
Zulu time in which the action was executed.