Versions Compared
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Introduction
This functionality allows bag tags and boarding passes to be printed remotely, that is, boarding passes and bag tags can be printed remotely from a connected KIU Terminal to another KIU terminal.
The following commands will allow performing the following functionalities:
Manage printers where bag tags and boarding passes will be printed
Manage terminals that will print remotely
Display terminals and printers configuration
Define Printer
The following commands can be used to define the remote printers for boarding passes and bag tags.
Print a boarding pass
The following command allows to set the terminal printer that will be shared with other KIU termianals, and where the boarding passes will be printed:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE>/P-ATB/<ON or OFF> |
Examples:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX457/P-ATB/ON --> Activates terminal to receive BP printings. |
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX457/P-ATB/OFF --> Deactivates terminal to receive BP printings. |
ON and OFF options are the options that allow activating or deactivating the use of the printers of a terminal.
When using the OFF indicator, if the terminal indicated in the command has associated terminals, it will be immediately unassigned and it will not be able to continue printing on the terminal printer.
If you do not enter # symbol and the terminal code (device), the system will assume that the terminal from which you are working will be the terminal in which the boarding passes will be printed. The command is the following:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA/P-ATB/<ON or OFF> |
Examples:
Code Block | ||
---|---|---|
| ||
PTA/P-ATB/ON --> Activates terminal to receive BP printings |
Code Block | ||
---|---|---|
| ||
PTA/P-ATB/OFF --> Dectivates terminal to receive BP printings |
Bag tags Printer:
The following command allows you to set the printer of the terminal that will be shared with other KIU terminals, and where the bag tags will be printed :
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE>/P-BTP/<ON or OFF> |
Examples:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX457/P-BTP/ON --> Activates terminal to receive BT printings |
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX457/P-BTP/OFF --> Deactivates terminal to receive BT printings. |
ON and OFF options are the options that allow activating or deactivating the use of the printers of a terminal.
When using OFF indicator if the indicated terminal has assigned terminals it will automatically be unassigned and will not allow to continue printing in the terminal printer
If you do not enter # symbol and the terminal code (device), the system will assume that the terminal from which you are working will be the terminal in which the bag tags will be printed. The command is the following:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA/P-BTP/<ON or. OFF> |
Example:
Code Block | ||
---|---|---|
| ||
PTA/P-BTP/ON --> Activates terminal where to receive boarding passes.Ac |
Code Block | ||
---|---|---|
| ||
PTA/P-BTP/OFF -->Deactivates terminal where to receive boarding passes.Ac |
Remote printer selection
The following commands should be used to define on which printers the boarding passes will be printed, and the bag tags.
In the command you must indicate the terminal in which the printers are connected.
Boarding pass printer
LINK
The following command allows establishing a link between terminals to remotely print boarding passes. This command allows you to link a terminal with a remote printer.
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE 1>/A-ATB/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX460/A-ATB/CUN00XX457 |
In the previous example when a passenger is accepted from terminal CUN00XX460,boarding pass will be printed to connected terminal CUN00XX457.
If terminal or device 1 is not indicated in the command ,system assumption will consider the terminal code from where the transaction is being made.
Code Block | ||
---|---|---|
| ||
PTA/A-ATB/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA/A-ATB/CUN00XX457 |
Device 2" is the terminal where the printer is connected.
Dissociate
The following command cancels the link between terminals to remotely print boarding passes.
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE 1>/D-ATB/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX460/D-ATB/CUN00XX457 |
In the previous example, when a passenger is checked-in from terminal CUN00XX460, the boarding pass will no longer be printed on the printer connected to terminal CUN00XX457.
If terminal 1 (Device 1) is not indicated in the command, the system will assume by default the terminal code from which the transaction is being made:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA/D-ATB/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA/D-ATB/CUN00XX457 |
Device 2" is the terminal where the printer is connected.
Bag Tag printer
LINK
The following command allows establishing a link between terminals to remotely print bag tags. This command allows you to link a terminal with a remote printer.
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE 1>/A-BTP/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX460/A-BTP/CUN00XX457 |
In the previous example, when a passenger is checked-in with luggage from terminal CUN00XX460, the bag tag will be printed on the printer connected to terminal CUN00XX457.
If terminal 1 (Device 1) is not indicated in the command, the system will assume by default the terminal code from which the transaction is being made:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA/A-BTP/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA/A-BTP/CUN00XX457 |
"Device 2" is the terminal where the printer is connected.
Dissociate
The following command allows to cancel the link between terminals to print bag tags remotely.
Code Block | ||||
---|---|---|---|---|
| ||||
PTA#<DEVICE 1>/D-BTP/<DEVICE 2> |
Example:
Code Block | ||
---|---|---|
| ||
PTA#CUN00XX460/D-BTP/CUN00XX457 |
In the previous example, when a passenger is checked-in with baggage from terminal CUN00XX460, the bag tag will no longer be printed on the printer connected to terminal CUN00XX457.
If terminal 1 (Device 1) is not indicated in the command, the system will assume the terminal code by default from which the transaction is being made:
Code Block | ||||
---|---|---|---|---|
| ||||
PTA/D-BTP/<DEVICE 2> |
Example
Code Block | ||
---|---|---|
| ||
PTA/D-BTP/CUN00XX457 |
"Device 2" is the terminal where the printer is connected.