Backoffice

The airline administrator can control and set the Web Check-in  configuration parameters from the Web Check-in back-office. Modifications made and saved in the back-office will be reflected in the Web Check-in process immediately. 

Access to the back-office address will be granted by KIU Helpdesk.

Languages available for the Back-office are Spanish and English. It will be defined according to the browser language configured by default. 

Browsers accepted to use be used for Web Check-in 2.0, are the following

MAC

• Safari: 5.1
• Chrome: 34

Windows

• Chrome: 37
• Internet Explorer: 9
• Firefox: 9

IOS

• Safari: 6

Android

• Chrome: 4.4 
• Internet: 5.

General Settings 

General Preferences

In this section, you can control the following general options which must be always be saved with the Save button in order to have effect.

Web Check-in for Group PNRs Acceptance: Allows or not the acceptance of those passengers in a reservation identified as a group. This option  must be checked in order to be activated.

Display Boarding Gate in Boarding Pass:  Allows to indicate or not boarding gate in boarding pass issued for the passenger . Boarding gate information is extracted from the control panel (PC)configuration in KIU RES. This option must be checked in order to be activated.

Seat Edition allowance: This options allows or not changing a previously chosen seat number. It must be checked in order to be activated. 

Accept Passengers with TK Status in Itinerary: Passengers who have an itinerary with status TK in their reservation can be accepted if this option is allowed. The option must be checked in order to be activated.

• Message for Passengers with TK Status in Itinerary: In case segments with TK status in passengers itinerary are accepted, a generic message has to be configured.This message has to be configured in English and Spanish, adding the text in each tab (ES for Spanish and EN for English).

In addition, the passenger must accept the itinerary changes in order to continue the web Check-in process, when accepting the modifications, the reservation updates the itineraries with TK status and deletes itineraries with UN status. In this version, these are the scenarios that will allow the passenger to web check-in:

• • Schedule change: Highlighted itinerary with the changes will have to be acknowledged in order to continue  with the process.
  • Change of class: Passenger will be prompted to confirm the changes, although the change of class will not highlighted.
  • Change of flight number, origin or destination: Passenger will see the changes highlighted  and will have to confirm them; However, as it is necessary to update the passenger  electronic ticket, it will not be possible to continue accepting the passenger through web check-in.  
    
    

Accept Passengers with KL Status in Itinerary:  Passengers who have an itinerary with KL status in  their reservation can be accepted if this option is allowed. The option must be checked to  be activated. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English). The passenger can confirm the itinerary but if it is necessary to update his electronic ticket it  will not be possible to continue with the acceptance by web check-in

Boarding Pass Sending Configuration:    Text configuration to be sent by email.

• E-mail Subject: : Text that will be displayed in the email  subject line that will sent to the passenger with the boarding pass. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English). If it is not configured, the web check-in process can not be completed. The subject contains the following data:
  • Name and Last Name: passenger's name and last name taken from the PNR
  • E-mail subject: subject chosen by the airline
  • Route: origin and destination of the flight taken from the PNR
    

Example: John Smith - Your Boarding Pass XX Airlines - EZE MIA

• Email Body: Text that will be displayed in the email body that will be sent to the passenger with the boarding pass along with a .pdf format boarding pass. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English). If it is not configured, the web check-in process can not be completed. In order to activate the use of Boarding Pass Web the following wildcard mus be entered: InsertBoardingPassWebLinkHere. This wildcard will displayed the legend "Boarding Pass Web" in the e-mail body with a link that gives access to the boarding on any web browser
  

Classes

 In this section, you can block booking classes that are not allowed  through Web Check-in. This means that for those passengers with itineraries  booked  in the classes set here, cannot be accepted on the flight through the web.

 If the passenger has an itinerary in connection and at least one of the flights involved is booked in a blocked class, the Web Check-in will not be allowed on any of the flights.

 If there is more than one open flight allowing the Web Check-in and those flights are not considered in connection, the passenger can only be accepted in those where the booking class is allowed.

 To configure a booking class, you must enter it together with the message that affected passengers will see. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English). To save the configuration, you must click on the Add button.

 Previously added classes will be displayed in the Blocked Classes Table, detailing each booking class and warning messages in each language. From this table, you can delete the classes by clicking on the delete button.

Seat Map

Seat Blocking

From this sub-menu, seats that will not be offered through Web Check-in can be configured by registration. For this reason  it is necessary to add the aircraft registration and the seats to be blocked separated by commas. Finally, you must click on the Add button.

 The previously blocked aircraft registrations and seats will be displayed in the Blocked Seats table. From this table, you can delete the blocking by clicking on the delete button.

Passenger type

In this section you can control different configurations for special passenger types.

Selectee passengers: those passengers identified as Selectee by DHS may or may not be accepted on the flight. In case of being accepted, a pre-boarding voucher will be issued instead of a boarding pass. In case this type of passengers are not accepted  on a flight, a message must be configured for the affected passengers so it can be visualizedvisualised. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English)

Inhibited Passengers: those passengers identified as Inhibited by DHS can not be accepted on the flight. A message must be configured for affected passengers so it can be visualized visualised . The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English).

Passengers with SSR WCKN: those reservations that contain the non-standard SSR WCKN may or may not be accepted on the flight. In case of being accepted, a pre-boarding voucher will be issued instead of a boarding pass. In case this type of passengers are not accepted  on a flight, a message must be configured for the affected passengers so it can be visualizedvisualised. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English)

Declaration message

In this section you can configure the declaration message that the passengers will have to accept in order to continue with the web check-in process.The Child Passenger: For those bookings with adults and child passengers you may choose whether the child passenger can be accepted independently o not. In case that child is allowed, the can be accepted on the flight with no adult, if not they will have to be confirmed with and adult or a previously checked adult. A message has to be configured for the not allowed case. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English).The maximum number of characters accepted is 500.

Error messages

In this section, you can configure special error messages.

DHS Verification Error - Missing data for DHS: When DHS data verification fails or is not sufficient, passengers cannot continue with the Web Check-in procedure

Declaration message

In this section you can configure the declaration message that the passengers will have to accept in order to continue with the web check-in process.The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English).The maximum number of characters accepted is 500.

Frequent Traveler

In this section, you can configure if the airline intends  to offer passengers the possibility of entering their frequent traveler's number. The option must be checked in order to be activated.

In case this option is offered, the airline code and name of the frequent flyer program must be added or the airline and then click on the Add button. Frequent flyer programs previously entered will be displayed in the Configured Airlines table, along with the code and name.  From this table, you can delete a program by clicking on the delete button.

Free Seating Message

In those cases in which the aircraft  registration assigned to a flight does not assign seats,a warning message must be provided to the passengers- advising that there is no seat selection available .The message must be configured in Spanish and English, entering the text in each tab (ES)for Spanish and En (EN )for English).

Message for UMNR Passengers: If a reservation only has a passenger type CHD (child), it will not allowed for web check-in, since the system assumes it as a minor that  may not be accompanied, so a warning message will be displayed .

Moreover passengers can check-in and print their boarding pass or pre-boarding card with the indicated NS (No seat)sign. On the seat selection screen, the message will be displayed.

Error messages

In this section, you can configure special error messages.

DHS Verification Error - Missing data for DHS: When DHS data verification fails or is not sufficient, passengers cannot continue with the Web Check-in procedure. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN En for English).

Message for Closed Flights: when the flight control panel (UMNR Passengers: If a reservation only has a passenger type CHD (child), it will not allowed for web check-in, since the system assumes it as a minor that  may not be accompanied, so a warning message will be displayed . The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English).

Message for Closed Flights: when the flight control panel (PC) is configured to accept passengers via web (parameter WCHK) a warning message will be displayed to the passenger. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English).

Message for INFT Passengers: when an INFT passenger type is present in a reservation, it will not be possible for web check-in , so it is necessary to display a warning message.

Error Error Message for  non-ticketed PNRs : if a passenger attempts to web check-in with a non-ticketed PNR , a warning message must be displayed that it will not be eligible for web check-in.

 Web Check-in Conditions

In this section you can configure the text that passengers can check before starting the flight conditions acceptance. A text with a link to the conditions must be included. This chosen text must be configured in English and Spanish in each tab(ES for Spanish and EN for English). The conditions must be loaded through a .pdf file. When the passenger wishes to verify the conditions of the airline to perform the web check-in, the previously loaded .pdf file will be displayed on the screen as a pop-up window of the browser used.

If you do not configure a text for the default link, the following information is displayed for the link: Information to complete your web Check-In . 

Tooltip

In this section, it is possible to configure a tooltip that will be displayed when the user places the cursor in the PNR and / or last name fields on the search screen, showing a message configured by the airline on the search page. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English). 

Boarding Pass 

In this section, you can configure and customize the boarding pass to be delivered to the passenger.

The first step is to set up a template or template in PDF format that will serve as a basis so that it is then completed with the passenger and flight information; click on the Web Check-in button ."Upload Boarding Pass" The maximum size of the template file is 1mb.

Passenger and flight data will be completed through different elements, which can be located or moved to fit the previously loaded template design. The loaded template may contain referential titles, images, texts and indications that the airline considers necessary for the passenger's understanding. By clicking on the Preview button, you can check the last saved boarding pass. Keep in mind that some browsers can block the pop-up window that opens the preview, so the user must allow the browser to do so.

The elements that contain the passenger and flight data must be relocated to fit the loaded template, taking as reference an X axis (bottom edge of the template) and a Y axis (left edge of the template), always considering the units in pixels. In this way, each element is adjusted to the design that the airline wants to implement.

Then, an example of a template with reference titles and additional baggage information for the passenger is added. The airline can update the template as many times as needed. The loaded template application will be available from the moment the information is saved, by clicking on the Save button.

You can verify the active boarding pass model by clicking on the button that will display a pop-up window with the template that is being used.

Boarding Pass Elements

There are mandatory elements that are part of the boarding pass and can not be deleted  but  they can be edited and searched. To modify, click on the Web Check-in button>Image Modifiedfrom the list of elements. This action will display a pop-up screen where the coordinates can be modified , size and type of source.

• Ticket_Number
• Flight
• Passenger_Name
• Departure_Time
• Departure_Date
• To
• From
• Boarding Time
• Gate
• Seat
• Sequence Number
• Barcode

Add Elements

---

You can add the following elements by clicking on the button      The elements that can be added are the following:                                          

FOID 

DEPARTURE AIRPORT NAME

You can add the  "Departure Airport Name" that will display the name of the departure airport. The DEPARTURE_AIRPORT_NAME element must be selected ; with the coordinates where you want to add it; the font size and type. Finally, you must save the element and the changes on the boarding pass so the element can be displayed.

CUSTOM

ARRIVAL AIRPORT NAME

You can add the  "Arrival Airport Name" that will display the name of the arrival airport. The Arrival_AirportName element must be selected with the coordinates where you want to add it; the font size and type of font. Finally, you must save the element and the changes on the boarding pass for which element begins to so the element can be displayed.

OPERATED BY

DEPARTURE CITY NAME

You can add the  "Departure City Name" that will display the name of the departure city. The Departure City Name element must be selected with the coordinates where you want to add it; the font size and type of font. Finally, you must save the element and the changes on the boarding pass for which element begins to so the element can be displayed.

BOARDING GROUP and  BOARDING GROUP IDENTIFIER

ARRIVAL CITY NAME

You can add the  "Arrival City Name" that will display the name of the arrival city. The Arrival City Name element must be selected with the coordinates where you want to add it; the font size and type of font. Finally, you must save the element and the changes on the boarding pass so that the element can  begin to can be displayed.

FOID 

It is the format used to display possible to add a  FOID to the boarding pass in mobile devices, because it´s responsive, it adds QR code instead of 2D bar code. It is integrated with the header and footer of the web check-in flow and it also permits to configure information messages

•  Web Boarding Pass Header: header displayes on top of the boarding highlighted in yellow
• Important Information for Web Boarding Pass: important information to display at the end of the boarding pass.
• Terms and conditions for Web Boarding Pass: terms and conditions to display at the end of the boarding pass.

Pre-Departure Card 

In this section you can configure and customize a pre-departure card.

Pre-departure card

The pre-departure card contains almost all the same elements as the Boarding Pass, although the following are excluded:

• 2D bar code
• Order number

Image Removedl.The file template maximum size is 1mb-

Passenger and flight data will be completed through different elements, which can be located or moved to fit the previously loaded template design. The loaded template may contain referential titles, images, texts and indications that the airline considers necessary for the passenger's understanding. By clicking on the Preview button, you can check the last saved boarding pass. Keep in mind that some browsers can block the pop-up window that opens the preview, so the user must allow the browser to do so.

The elements that contain the passenger and flight data must be relocated to fit the loaded template, taking as reference an X axis (bottom edge of the template) and a Y axis (left edge of the template), always considering the units in pixels. In this way, each element is adjusted to the design that the airline wants to implement.

Image Removed

Next , an example of a template with reference titles and additional baggage information for the passenger is added. The airline can update the template as many times as needed. The loaded template application will be available from the moment the information is saved, by clicking on the Save button.

Boarding Pass Elements

 There are mandatory elements that are part of the boarding pass and can not print of the passenger checked. The FOID element must be selected; the coordinates where you want to add it; the font size and type. Finally, you must save the element and the changes on the boarding pass so the element can be displayed.

CUSTOM

Any customizable element can be added  by the administrator to the boarding pass print . The CUSTOM item must be selected; the coordinates where you want to add it; the size and type of font. Finally, you must save the element and the changes on the boarding pass for which element begins to be displayed.

OPERATED BY

"Operated by" element can be  added to the boarding pass print. This is extracted from the OPTG configuration of the flight PC or control panel of the operating carrier.. The item OPERATED_BY must be selected; the coordinates where you want to add; the size and type of font. Finally, you must save the element and the changes on the boarding pass for which element begins to be displayed.

BOARDING GROUP and  BOARDING GROUP IDENTIFIER

Boarding group and Boarding group identifier can be  added to the boarding pass print. The item BOARDING_GROUP and BOARDING_GROUP_IDENTIFIER must be selected; the coordinates where you want to add; the size and type of font. Finally, you must save the element and the changes on the boarding pass so that the element can  begin to be displayed.

Web Boarding Pass

It is the format used to display the boarding pass in mobile devices, because it´s responsive, it adds QR code instead of 2D bar code. It is integrated with the header and footer of the web check-in flow and it also permits to configure information messages

•  Web Boarding Pass Header: header displayes on top of the boarding highlighted in yellow
• Important Information for Web Boarding Pass: important information to display at the end of the boarding pass.
• Terms and conditions for Web Boarding Pass: terms and conditions to display at the end of the boarding pass.

Pre-Departure Card 

In this section you can configure and customize a pre-departure card.

Pre-departure card

The pre-departure card contains almost all the same elements as the Boarding Pass, although the following are excluded:

• 2D bar code
• Order number

Image Addedl.The file template maximum size is 1mb-

Passenger and flight data will be completed through different elements, which can be located or moved to fit the previously loaded template design. The loaded template may contain referential titles, images, texts and indications that the airline considers necessary for the passenger's understanding. By clicking on the Preview button, you can check the last saved boarding pass. Keep in mind that some browsers can block the pop-up window that opens the preview, so the user must allow the browser to do so.

The elements that contain the passenger and flight data must be relocated to fit the loaded template, taking as reference an X axis (bottom edge of the template) and a Y axis (left edge of the template), always considering the units in pixels. In this way, each element is adjusted to the design that the airline wants to implement.

Image Added

Next , an example of a template with reference titles and additional baggage information for the passenger is added. The airline can update the template as many times as needed. The loaded template application will be available from the moment the information is saved, by clicking on the Save button.

Boarding Pass Elements

 There are mandatory elements that are part of the boarding pass and can not be deleted but they can be  edited and located. To modify, click on the Web Check-in button>from the element list. This action will display a pop-up window where you can modify coordinates ,size and font type.

• Ticket_Number: 
• Flight: 
• Passenger_Name: 
• Departure_Time: 
• Departure_Date: 
• To: 
• From: 
• Boarding Time: 
• Gate: 
• Seat: 

Add elements

You can add the following elements by clicking on the button      The elements that can be added are the following:  

FOID 

It is possible to add a  FOID to the boarding pass print of the passenger checked. The FOID element must be selected; the coordinates where you want to add it; the font size and type. Finally, you must save the element and the changes on the boarding pass so the element  can be displayed.

CUSTOM

Any customizable element can be added  by the administrator to the boarding pass print . The CUSTOM item must be selected; the coordinates where you want to add it; the size and type of font. Finally, you must save the element and the changes on the boarding pass so it can be displayed.

OPERATED BY

"Operated by" element can be  added to the boarding pass print. This is extracted from the OPTG configuration of the flight PC or control panel of the operating carrier.. The item OPERATED_BY .. The item OPERATED_BY must be selected; the coordinates where you want to add; the size and type of font. Finally, you must save the element and the changes on the boarding pass so it can be displayed.

BOARDING GROUP and  BOARDING GROUP IDENTIFIER

Boarding group and Boarding group identifier can be  added to the boarding pass print. The item BOARDING_GROUP and BOARDING_GROUP_IDENTIFIER must be selected; the coordinates where you want to add; the size and type of font. Finally, you must save the element and the changes on the boarding pass so it can be displayed.

BOARDING GROUP and  BOARDING GROUP IDENTIFIER

Boarding group and Boarding group identifier can be  added to the boarding pass print. The item BOARDING_GROUP and BOARDING_GROUP_IDENTIFIER must be selected; the coordinates where you want to add; the size and type of font. Finally, you must save the element and the changes on the boarding pass so it can be displayed.

Destinations

Pre-departure Card Web

It is the format used to display the boarding pass in mobile devices. It is integrated with the header and footer of the web check-in flow and it also permits to configure information messages

• Web Pre-departure Card Header: header displayed on top of the web pre-departure card highlighted in yellow.
• Important Information for Web Pre-departure Card: important information to display at the end of the web pre-departure card.
• Terms and conditions for Web Pre-departure Card: terms and conditions to display at the end of the web pre-departure card.

Destinations

 In this section, you can enter those destinations that generate a pre-departure card instead of  a boarding pass. You must enter the airport code and then click on the Create button.

The previously loaded destinations will be displayed in the Destinations table, detailing the IATA airport code; the name of the airport and city to which it belongs.You can delete destinations by clicking on the delete button..

Pre-boarding

Message

In this section, you can configure a message that will be displayed on all pre-boarding documents. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and En for English).

Web Check-in conditions

In this section you can configure the conditions or instructions that the airline wishes to present to the passenger before starting a reservation search.

Text for Conditions link

From here you can enter the text to be displayed by the end user. The message must be configured in Spanish and English, entering the text in each tab (ES for Spanish and EN for English).

Upload conditions pdf.

From here you must upload the pdf file that will be opened when using the link. Click on Select File and then Save. In the lower part the last saved file will be displayed.

Pre-reserved seats

Web Check-in will only be able to process those seats that have been pre-assigned , this means that there are seats for all the passengers of the reservation; these seats can also be modified.

In case not all the seats are pre-assigned the acceptance process on the flight can not be completed.

KIU RES configuration

Equipment

A specific equipment  registration must be associated with the table used in the flight loading module (KASAT)  so that, when a flight check-in containing such equipment is initialized, that aircraft registration is automatically assigned to the control panel and set the corresponding seat map. This action will allow the seat map to be used both for check-in and in the Web Check-in. To associate the aircraft registration with the equipment table, the command is as follows: 

KASAT/M/{REGISTRATION ID}/OAR{REGISTRATION}

KASAT/M/231/OARLV-WSH

Description: 

Once the registration is associated, it will be displayed when checking  the KASAT * command in the OAR Default column, as shown below:

KASAT*
 CONFIGURATION EQUIPMENT - SAT
ITEM  EQP  (CAB/AU) CLASSES                                  ##   (OAR Default)
   1  SF3  (Y/34)YBHKMZGXNOEDRTVSQ                            17    LV-SMF
 231  DC9  (Y/110)YBKLMSOHEW                                  10    LV-WSH
 339  DC9  (F/5)FP(C/15)CJ(Y/90)YBKLMSOHEW                    14
 757  757  (J/12)JCD(Y/158)YBHKMNOS                           11    LV-MPD

KASAT/M/{EQUIPMENT ID}/OARDEL

KASAT/M/231/OARDEL

When performing this command, the system will remove any registration linked to the equipment located in item 231 of the KASAT *. 

Inhibit Automatic Initialization

This is an exception table so that the flights indicated here are not automatically initialized for check-in. It is necessary to have the CHKLV2 keyword  to update this table. The commands for the administration of this table are the following:

Table display

PIB*

PIB*
FLIGHTS BLOCKED FOR INITIALIZATION
4421    8800    8000    5111    4500   

Add flight:

This command allows you to add a flight from the automatic initialization block table:

PIB/A-{flight number}

Example:

PIB/A-4500

Description:

Delete Flight:

 This command allows you to delete a flight from the automatic initialization block table:

PIB/D-{fligh number }

PIB/D-4500

Description:

When the responses are correct the system will reply OK

Flights Exceptions and Segments Not Accepted

This table allows you to select the flight segments that should not be accepted through the Web Check-in, that is, those segments that will are not eligible  through web check-in. The commands for the administration of this table are the following:

Table Display:

Code Block
language xml theme FadeToGrey
PXS*

Example:

No Format
PXS* SEGMENTS NOT AVAILABLE FOR WEB CHECK-IN ALL/AEPCOR 4420/MDQBRC 4501/CORAEP

Considerations :

• ALL option cannot be combined with specific flight numbers for the same segment,as well as flight loads and then ALL option for the same segment. Only one logic can be selected.
• Although flights will not accept passengers via web, the WCHK indicator will remain in Y (Yes) on the flight PC.

Add flight and segment:

PXS/A-{flight}{segment}

PXS/A-4500AEPCOR

Description:

Add segment for all flights:

This command allows to add a segment for all  airline flights to the table.

PXS/A-ALL{segment}

PXS/A-ALLAEPMDZ

Delete flight and segment

PXS/D-4500AEPCOR

Delete segment ( All flights)

PXS/D-ALLAEPCOR

Description:

Correct system response are OK

 JJCHK Table

Anchor
TablaJJCHK TablaJJCHK

JJCHK table contains the Web Check-in behavior configurations under the WEB CHECK-IN section. To request modifications, send an email to the Helpdesk host@kiusys.com or your account executive

• [WTO]WEB CHECK-IN TIME OPEN: Indicates number of hours before flight departure in which passengers are allowed to be accepted by Web Check-in.
• [WTM]WEB CHECK-IN TIME CLOSE:  Indicates the number of hours before flight departure  in which passengers are not allowed to be accepted by Web Check-in
• [WGO]WEB CHECK-IN TIME OPEN (GROUPS):  Indicates the number of hours before flight departure in which passengers are allowed in group bookings to be accepted by Web Check-in.
• [WGM]WEB CHECK-IN TIME CLOSE (GROUPS): Indicates the number of hours before flight departure  in which passengers are not allowed in group bookings to be accepted by Web Check-in.
  
  
• [WSR]WEB CHECK-IN * SSR CHKD/SEAT GENERATION: SSR CHKD element is allowed to be added in PNL to indicate that passengers are already check through Web check-in.
• [WER]WEB CHECK-IN EXTERNAL RECORD LOCATOR SEARCH: Indicates if passenger is able to check in through the web with another GDS PNR.
• [WPS]WEB CHECK-IN ALLOW PSGR SELECTEE:  Indicates if Selectee passengers are accepted through web check-in 

In addition, the following parameter must be configured in the DEFAULT CHECK-IN INITIALIZATION section.

• [DBP]DEFAULT BOARDING PRINT: Indicates whether the boarding pass printing is enabled or not. In case it is enabled the indicator must be set to "YES

 Web Check-In process

---

Next, the final steps that the passenger must perform to be accepted on a flight will be described. Keep in mind that for the process to be successful, all the requirements configured in the Flight Control Panel (PC) must be met, for example the information entry  to complete APIS, holding a ticket , assigned flight registration, etc.

Connecting Flights

A passenger in order  to be able to check-in their itinerary online, all flights must be initialized, with registration and meet the passenger acceptance schedules from the web according to the JJCHK configuration. The behavior is the same as that applied in KIU RES.

Interline connecting flights.

In case of interline connecting flights  with no mutual agreement the passenger will be allowed to check-in only on the airline's own flights

Steps for web check-in

Under construction