Versions Compared
| Version | Old Version 18 | New Version Current |
|---|---|---|
| Changes made by | ||
| Saved on |
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Flight indicators can be modified through the schedule change process. Depending on the change to be made, a warning message in the status will be generated for those affected PNRS.
Keep in mind that when a change occurs through the schedule change process, all indicators (VM) that have been placed by CRC will be deleted respecting those that have been placed by schedule change (KS).
The following modifications can only be made after protecting passengers with the KSGMODIFY command
- Header
| Code Block | ||||
|---|---|---|---|---|
| ||||
FLT Flight number |
It is not necessary to change the flight or discontinuity date from the schedule change process. It can be done through date division.
- Legs
DEP | Departure Time |
ARR | Arrival Time |
BRD | Boarding Point |
OFF | Off Point |
EQP | Equipment |
CLS | Classes |
CDD | Change Date and Day |
We must bear in mind that if there are indicators that are related in the Header and in the Legs, when any of them is modified it must be done in both parts.
Steps to follow
Step 1:
| Code Block | ||||
|---|---|---|---|---|
| ||||
KA*4580 Flight items to modify are displayed |
Step 2:
| Code Block |
|---|
KS.2 Parameter item to modify is selected. |
This command displays the flight inventory included in the dates parameter. When this is done you can begin working as it is done in step 3 or ignore it with the KSI command.
From this step, to ignore the KA * ALL or KA * Flight command can also be executed.
Response:
| No Format |
|---|
KS.3
CARRIER FLIGHT AEP.AEPXX-AA 1625/11JAN06
XX 4420
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000011189 22FEB2006 22FEB2006 -234567 X-MO 3 AEP CRD
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 AEP MDQ 1205 1310 65 0 124/CRJ 5 1 382
2 MDQ CPC 1345 1515 90 0 420/DC9 5 1 1194 3 CPC CRD 1600 1800 120 0 420/DC9 5 1 701
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 AEP MDQ 01 Y Y 50 0 0 0 0 S
02 B 40 2-1 80 0 0 S
03 H 40 2-2 40 0 0 S
04 K 20 1-1 40 0 0 S
05 N 20 1-2 20 0 0 S
2 MDQ CPC 01 Y Y 124 0 0 0 0 S
02 B 0 0 S
03 H 0 0 S
04 K 0 0 S
05 N 0 0 C S
3 CPC CRD 01 Y Y 124 0 0 0 0 S
02 B 0 0 S
03 H 0 0 S
04 K 0 0 S
05 N 0 0 C S
AEP-CPC 01 Y Y 50 0 0 0 0 S
02 B 0 0 S
03 H 0 0 S
04 K 0 0 S
05 N 0 0 S
AEP-CRD 01 Y Y 50 0 0 0 0 S
02 B 0 0 S
03 H 0 0 S
04 K 0 0 S
05 N 0 0 S
MDQ-CRD 01 Y Y 124 0 0 0 0 S
02 B 0 0 S
03 H 0 0 S
04 K 0 0 S
05 N 0 0 S
|
Step 3:
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSGMODIFY The flight is protected in order to start modifying it |
Response:
| No Format |
|---|
0 FLIGHTS (73) PAX IN (19) PNRS PROCESS DONE |
System responds with the number of flights, passengers and PNRS to process.
You can verify that the flight is protected by doing the command KS *, which will display the item with the legend *** UPDATE MODE *** as the title.
Step 4:
The necessary modifications are made and in response the item displayed with the modification made is obtained.
Simultaneously, all the changes that need to be made in the different indicators are added, entering them one at a time.
Modify flight number
FLT(Flight)indicator is used with the command KSH to modify a flight number ( KSHFLT)
Example:
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSHFLT4100 |
Description:
KSH | Fixed command |
FLT | Flight indicator |
4100 | New flight number or service |
This change is reflected by modifying all the PNRs of the modified flight.
Modify Legs
Departure or Arrival Time Change:
The indicators are DEP for the departure time and ARR for the arrival time. These are changed by segments with the KSLN command (n is the leg number).
Examples:
Modify departure time
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1DEP1000 |
Description:
KS | Fixed command |
L1 | Leg 1 |
DEP | departure time indicator |
1000 | New departure time |
Modify arrival time
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1ARR1100 Arrival time is modified |
Entry is for leg 1
Both departure and the arrival time can be modified simultaneously. The entry of midnight hours is not accepted as 0000 or 2400, and should be replaced if necessary by 2359 or 0001
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1DEP1000/ARR1230 |
This change is reflected as a change in the departure and arrival time in the PNR segments
Equipment Change :
EQP is equipment indicator which is modified by legs. Several equipments can co-exist for the same flight as long as the classes match each other.
Command to modify is :
Equipment Change
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1EQP480 |
Description:
KS | Fixed Command |
L1 | Leg 1 |
EQP | Equipment indicator |
480 | New equipment number (Available in KASAT* table) |
- Entry is repeated whenever necessary
- This change does not modify PNRs.
Change in booking classes
Class modification is loaded for the first leg but it is good for the whole flight.
CLS is class indicator.Classes can be added or canceled only if they are available in the already existent equipment or one to be loaded
Procedure to modify is the following:
Leg 1 is loaded with the classes in the desired order,according to the example:
| Code Block |
|---|
KSL1 CLS YBHMVO-G.B-N.M |
Description:
KSL1 | Fixed command |
CLS | Class indicator |
YBHMVO | Added booking classes,sorted by input order |
-G.B | -Deleted booking classes .New booking class |
-N.M | -Deleted booking classes .New booking class |
After the CLS indicator, the classes that will remain on the flight will be displayed sorted as they were loaded, for example: YBHMVO.
To cancel classes that were on the flight, it must be defined in which class the canceled ones will be located, placing a hyphen, which will indicate the deletion, followed each one by a period (.) And the class where it will be re-accommodated, example : -GB-NM, class G will be eliminated and will be re-accommodated in B, the same with N and M.
The response is the display of the changed made.
Classes can be canceled and re-accommodated in those that are being added as new.
If an error occurs when a class is canceled and it is re-accommodated in another that is not the desired one or in the order of the load or any other type of conceptual error, the KSIR command must be executed, which deletes all the modifications and returns to the next step after having done KSGMODIFY. All correct changes must be entered again.
The only classes that can not be canceled are the mandatory ones, except that all classes in that cabin are canceled and relocated to another cabin.
You can delete one class and re-accommodate it in another class that belongs to another cabin.
This change is reflected by modifying the PNRs that are affected in the change of classes.
Day change:
CDD indicator is "Change date and day". It is modified individually but it is normally done together with a schedule change. Possible levels are 0,1 or 2. It affects legs and it is modified in the following way:
KSL1CDD0 | No day change |
KSL1CDD1 | One day after |
KSL1CDD2 | Two days after |
If the change of day occurs on the ground , the system automatically places the 1G (G: Ground) indicator, whereas if it occurs on flight the indicator will be 1A (A: Air).
The change is applied to the affected leg.
Example:
Example:
| Code Block |
|---|
Example: ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000003972 01APR2018 10APR2018 1234567 DIARIO 2 SLA AEP LEG BRD OFF DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km) 1 SLA TUC 2300 2340 40 0 420/DC9 2 1 221 2 TUC AEP 0010 0130 80 1G 420/DC9 2 1 1075 |
.
On this flight, the day change is applied in to leg 2 since it occurs after the arrival of leg 1 and before the departure of leg 2.
This change is reflected by modifying the affected PNRs
Change of Origin or Destination:
You can modify the origin or destination airport of a section or add or delete any of them.
The procedures are the following:
Origin Airport Change:
| Code Block |
|---|
KSL1BRDCOR |
KS | Fixed command |
L1 | Leg 1 |
BRD | Boarding airport |
COR | New airport |
System response is a display of the modified inventory.
When modifying a boarding airport, the system recalculates the distance between the new loaded leg and the equipment and classes that the leg had.
Schedule should be changed if necessary as it was described in the CHANGE OF HOURS item. Same transaction can be done in the same step as follows:
| Code Block |
|---|
KSL1BRDCOR/DEP0630/ARR0745 |
KSL1BRDCOR | Modify origin command |
/ | Slash |
DEP0630 | Modify departure time command |
/ | Slash |
ARR0745 | Modify arrival time command |
System response is a display of the modified inventory.
Modify destination airport
KS | Fixed command |
L1 | Leg 1 |
OFF | Origin airport indicator |
COR | New airport |
System response is a display of the modified inventory.
When modifying a destination airport, the system recalculates the distance between the new loaded leg and the equipment and classes that the leg had.
Schedule should be changed if necessary as it was described in the CHANGE OF HOURS item. Same transaction can be done in the same step as follows:
Changes of Airports with Passenger Re-acccommodation
Keep in mind that in case of re-accommodation if there are passengers at both origin or destination to change, the system will leave them without re-accommodation. To be able to re-accommodate them in the new generated route, the order must be executed next to the command in the following way:
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1OFFCOR-REACOK |
KS | Fixed command |
L1 | Leg 1 |
BRD o OFF | Origin or Destination airport indicator |
COR | New airport |
- | Hyphen |
REACOK | New route re-accommodation indicator. |
Keep in mind that if you use the REACOK option when modifying some of the origin or destination points , and then you want to modify any other origin or destination for another leg you must repeat the REACOK option entry with every change.
In case you make a mistake, you must execute KSIR (go back to the formaer step of the KSGMODIFY) and start modifying it again. Neither can you replace the same point twice in the same transaction.
Leg Cancellation
A leg can be eliminated and the system will eliminate the associated segments and re-order the segments and flight segments again.
It must be borne in mind that when a leg is eliminated, when it is indicated, the system acts on the destination airport. Therefore, when you want to eliminate the origin of leg o leg 1, you have to work on an imaginary section or leg 0 (zero).
Example:
Based on the following inventory system response after having done the KSGMODIFY as follows:
| Code Block |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1652/22NOV04
XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000005985 01DEC2004 10DEC2004 1234567 DIARIO 3 JUJ AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 JUJ SLA 0700 0730 30 0 124/CRJ 3 1 72
2 SLA TUC 0800 0835 35 0 124/CRJ 3 1 221
3 TUC AEP 0900 1045 105 0 124/CRJ 3 1 1075
LEG BRD OFF # M-C AUTH BS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 JUJ SLA 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
2 SLA TUC 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
3 TUC AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
JUJ-TUC 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
JUJ-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
SLA-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0 |
- To cancel TUC the following command must be done:
KS | Fixed command |
L2 | Leg 2 |
DEL | Delete indicator |
System response is a display of the modified inventory.
.
Response:
| No Format |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1728/22NOV18 XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000005985 01DEC2004 10DEC2018 1234567 DIARIO 2 SLA AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 SLA TUC 0800 0835 35 0 124/CRJ 3 1 221 2 TUC AEP 0900 1045 105 0 124/CRJ 3 1 1075
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 SLA TUC 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
2 TUC AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
SLA-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0 |
The system recalculates the distance and eliminates the schedules corresponding to TUC and the related segments. In case it is necessary to modify schedules of the remaining leg, this can be done with the usual procedure.
Returning to the initial example of a 3-leg flight, if you want to cancel JUJ, which is the origin of leg 1, the command is:
KS | Fixed command |
L0 | Leg 0. |
DEL | Delete indicator |
Response:
| No Format |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1728/22NOV04 XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000005985 01DEC2004 10DEC2004 1234567 DIARIO 2 SLA AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 SLA TUC 0800 0835 35 0 124/CRJ 3 1 221 2 TUC AEP 0900 1045 105 0 124/CRJ 3 1 1075
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 SLA TUC 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
2 TUC AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
SLA-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
|
The system recalculates the distance and eliminates the schedules corresponding to JUJ and the related segments. In case it is necessary to modify schedules of the remaining legs, this can be done with the usual procedure.
Add Legs
Legs can be added and system will create segments based on these legs and re-accommodate them on the flight.
As well as deletion of legs take into account that when adding any the system will act on the destination airport and hence when adding it in to the origin leg or leg 1 there is a need to work on an imaginary leg or leg 0 .
Example: Counting on the following inventory and after having done KSGMODIFY.
| Code Block |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1203/23NOV04 XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END 1 0000005984 11DEC2004 30DEC2004 1234567 DIARIO 1 SLA AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km) 1 SLA AEP 0800 1000 120 0 124/CRJ 3 1 1275
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 SLA AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
|
- As an example in order to add TUC to segment 1 as destination airport the command to perform is ;
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1ADDTUC |
KS | Fixed command |
L1 | Leg 1 |
ADD | Add indicator |
TUC | New airport |
System response is the displayed inventory with the changes adding the new destination,recalculating distances and re-adjusting the new segments.
Response:
| Code Block |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1212/23NOV04 XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END
1 0000005984 11DEC2004 30DEC2004 1234567 DIARIO 2 SLA AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 SLA TUC 0800 1000 120 0 124/CRJ 3 1 221
2 TUC AEP 0800 1000 120 0 124/CRJ 3 1 1075
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 SLA TUC 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
2 TUC AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
SLA-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0 03 H 0 0 0
|
When adding legs, all the data corresponding to schedules, equipment and classes is extracted from the previous leg, except when it is added to leg 0 that data is extracted from the subsequent leg, therefore the next step is to modify the new leg schedules and if necessary, the equipment and other commercial indicators.
2.Returning to the initial example of a one-leg-flight , if you want to add JUJ at the beginning of it, the command is:
| Code Block |
|---|
KSL0ADDJUJ |
KS | Fixed Command |
L0 | Leg 0 |
ADD | Add indicator |
JUJ | New airport |
Response:
| No Format |
|---|
CARRIER FLIGHT *** UPDATE MODE *** HDQ.BUEXX-MM 1222/23NOV18 XX 4111
ITEM IDMASTERVL EFFECT DISCONT FREQUENCY NLG FRM END
1 0000005984 11DEC2018 30DEC2004 1234567 DIARIO 2 JUJ AEP
LEG BRD TD OFF TA DEPT ARRV 'BLK CD NBR/EQP NBC CAB DIST(km)
1 JUJ SLA 0800 1000 120 0 124/CRJ 3 1 72
2 SLA AEP 0800 1000 120 0 124/CRJ 3 1 1275
LEG BRD OFF # M-C AUTH BS LS NG-NL LSS TSO TSC NLOS WLL STATUS ML
1 JUJ SLA 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
2 SLA AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0 0
JUJ-AEP 01 Y Y 50 0 0 0 0
02 B 0 0 0
03 H 0 0
|
System response is the displayed inventory with the changes, adding the new destination, recalculating distances, origin and destination in the header, number of legs and recreating the new segments.
The next step is to modify the schedules of the new leg ,and if necessary the equipment and other commercial indicators.
3. Option to add legs with the schedule:
You can add legs with the schedule by doing the following command:
| Code Block | ||||
|---|---|---|---|---|
| ||||
KSL1ADDJUJ/DEP1000/ARR1200 |
KSL1ADDJUJ | Add leg command |
DEP1000 | Departure time |
ARR1200 | Arrival time |
| Note | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
2 .If after performing KSGMODIFY command should be necessary to re-establish the taken item as it was in the beginning without modifying anything the entry is :
This command ignores the protection that the schedule process does on the flight and restores it. System response is: 3 FLIGHTS (42) PAX IN (17) PNRS RESTORED DONE
3.To visualize the changes that are being made during the process, the command is KS ** which allows to view the status of the indicators before and after the change. 4. Once the command KSGMODIFY is done you cannot do the KA*ALL entry in the same window. System will respond NOT PERMITTED. SCHEDULE PROCESS. You can view KA* entry by changing to another window 5.You can execute the commands to add commercial indicators to flights (sales limit, waiting list limit, closing or opening of classes, etc.) while making some modification of flights, but after the KSGMODIFY entry, not before . KSGMODIFY can only be avoided if the only modifications to be made are commercial indicators. 6.To ignore the changes that have been made after KSGMODIFY entry , KSIR command can be performed. It ignores the changes made and returns to the step after the KSGMODIFY.
Step 5
Paso 5: En el caso de haber realizado una eliminación o cambios de tramos, se debe ejecutar una reacomodación de los pasajeros afectados a dichos tramos o segmentos. Para ejecutar la reacomodación de pasajeros ver en las páginas siguientes, el capítulo REACOMODACION DE PASAJEROS DENTRO DEL PROCESO DE SCHEDULE CHANGE Step 5: In the case of having carried out an elimination or leg changes , a rearrangement of the passengers deleted or changed a leg , a passenger re-accommodation affected to such legs or segments must be executed. To execute the rearrangement of passengers passenger re-accommodation take a look in the following pages, the chapter PASSENGEROMIZATION OF PASSENGERS at chapter PASSENGER RE-ACCOMMODATION WITHIN THE SCHEDULE CHANGE PROCESS Paso Step 6 :
Respuesta:Response
Este procedimiento, además de procesar y fijar los cambios realizados, modificará los PNRs afectados colocando en los segmentos confirmados del vuelo modificado un status UN y creará un segmento nuevo con los datos actualizados y status TK. Aquellos PNRs que hubiesen estado en lista de espera y les colocará también un status UN al segmento modificado y un status TL al nuevo segmento. Los segmentos que estuviesen con status MM o HM antes de la modificación aparecerán también UN pero el nuevo segmento quedará MM o HM según corresponda.This procedure, in addition to processing and saving the changes made, will modify the affected PNRs placing in the confirmed segments of the modified flight a UN status and will create a new segment with the updated data and status TK. Those PNRs that had been held on waiting list will also get a status UN to the modified segment and a TL status to the new segment. The segments that were with status MM or HM before the modification will also appear UN but the new segment will be MM or HM as appropriate.
|