From On this module you can will learn to manage the seat map assigned to a flight at check-in.

Block

Blocked or

reserve

reserved seats

Use the following entry to display the seat map

Code Block

language	xml
theme	FadeToGrey

PC<Flight Number>/<Date><Boarding Airport>,SMP

(Seat map management for blocking or reserving seats is also available on Graphic mode)

To block o reserve seats select from the drop down menu, click on the seat to select, then click Apply. Click OK to exit.

To unblock repeat the same entry, right-click to selected seat, choose an option from the drop-down menu then click apply and OK to exit

back to top

Panel

borderColor	gris
bgColor	gris

Table of Contents

outline	true
class	fixedPosition

Managing the seat map by using entries

The functions to block, unblock, and the option to allow infants on adult´s lap infants can be edited using entries instead of displaying the graphic graphical seat map

Reserve Seats

Use the following options to reserve a seat

PC<flight Number>,SMP/R+<seat number>

Reserves the selected seat number and keeps the previously reserved seats.

Example: PC4444,SMP/R+6A

Use the options below to reserve seat / rows

9A	Reserves seat 9A
7AC	Reserves seats 7A and 7C
10*	Reserves the whole row 10
1214	Reserves rows 12 and 14
*86A**	Reserves row 8 and seat 6A

PC<flight Number>,SMP/R<seat number >

Reserves seat number 6A and unblocks all the previously reserved seats.

Example: PC4444,SMP/R8C

PC<flight Number>,SMP/R-<seat number >

Removes the selected seat but keeps all the previously reserved seats on the list. Same logic to reserve seat/rows apply for unblocking.

Example: PC4444,SMP/R-12B

PC<flight Number>,SMP/R

Deletes and unblock all the reserved seats

Note
Indicator SSM (Screen Seat Map) can replace SMP on any of the entries described on top to display a seat map

back to top

Block Seats

Use the following options to block a seat on the seat map.

PC<flight Number>,SMP/B+<seat number >

Blocks the selected seat number and keeps the previously block seats.

Example: PC4444,SMP/B+6A

Use the following options to block a seat or row.

9A	Blocks the seat 9A
7AC	Blocks the seats 7A y 7C
10*	Blocks the whole row 10
1214	Blocks rows 12 and 14
*86A**	Blocks row 8 and seat 6A

PC<flight Number>,SMP/B<seat number>

Block seat 6A and unblocks all the previously reserved seats

Example: PC4444,SMP/B8C

PC<flight Number>,SMP/B-<seat number>

To unblock a specific seat and keeping the previously blocked seat. Same logic to block seat/rows apply for unblocking.

Example: PC4444,SMP/R-12B

PC<flight Number>,SMP/B

Unblock and release all seats.

Note
Indicator SSM (Screen Seat Map) can replace SMP on any of the entries described on at the top to display a seat map

back to top

Lap Infant indicator

Seat indicator for infant on adult´s lap

To indicate that infants are accepted in a seat in on the seat map, the following command can be entered:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I2A

Description

PC3172/07FEBAEP,	Mandatory to indicate flight number, departing date and boar board point
SMP	Indicador del seat Seat map indicator. También puede indicarse SSM (Screen Seat Map). SSM also avaialble for Screen seat map
/	Slash
I	Indicator to accept an infant on adult´s lap infants
2A	Seat number for accepting an infant on adult´s lap infant

Choose from the following options when editing a seat or row to accept an infant on adult´s lap infants

9A	Configures seat 9A
7AC	Configures seats 7A y 7C
10*	Configures row 10
1214	Configures row 12 and 14
*86A**	Configures row 8 and seat 6A

An I displaying on the center of the seat will indicate seat allows lap infants

Example:

Seats 3ABC allow lap infants and seat 2ABC do not

back to top

Delete lap Infant indicator

Use the following entry to delete te allow lap infant indicator a seat available for an infant on adult´s lap from the seat map:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I-2A

Description:

Use the same entries entry as the ones one described to add the lap infant indicator to remove it, simply remove the indicator for an infant on adult´s lap. Simply add a - sign before the seat number

Same logic to add The same logic applies for adding or removing the indicator to seat /or rows apply for removing the indicator.

Use the following entry to remove the the lap infant infant on adult´s lap avaialble seat indicator for all the seats on the seat map

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP/I

This entry will delete all the indicators for lap infant seats available for accepting infants on adult´s lap which were previously added to the seat map

back to top

Managing the seat map from the control panel (version 2)

Introducción

Special feature configurations for flight seat map can be managed at check-in seat maps assigned to a flight. You can set add special features for each seat at the time of check-in on the seat map when checkin-in and from the Flight Control Panel (PC)

Description

In order to manage the different seat characteristics that can be configured in on the check-in seat map, there are 2 versions types of versions.
Version 1 is the one distributed to all airlines and it is the one by default.
Version 2 includes the possibility of configuring new special features , allowing them to for the same seat and also includes aircraft equipment aircraft seat map with 2 floors (upper and main deck)
The new multiple features that are included in version 2 ,can be configured to for the same seat and but the rows that identify identifying the aircraft floor (upper and main deck) are not available to be displayed in the graphic mode, they on the graphical mode. The rows can only be displayed in command native mode. In any caseAnyway, if version 2 is activated, the graphic graphical seat map containing displaying the characteristics of on version 1 can be displayedis available.

Activate version type:

The version to be used by the airline is configurable and the airline must request it version will be configured under airline request to KIU Support for activation.

Soported Features

This version incorporates the possibility for assigning and displaying multiple characteristics to the same seat and allows managing new characteristics that are not avaialable in force in version 1 (seats that have an electricity charger, seats that allow seating people in wheelchairs, seats that allow seating unaccompanied minors)
In the seats that are in the rows configured in the upper deck , seat rows special and multiple characteristics can also be configured (in the same way that it is configured in the main deck)
This configuration allows managing the map of seats that contain multiple seat characteristics in the same seat (both operational and commercial) and It also incorporates the possibility of configuringto configure/viewing view seats that allow for passengers with reduced mobility (PMR as i.e, wheelchair) and unaccompanied minor (UMNR)minors.
These new features are only displayed in the drop-down seat map menu, in the PV and PC, that is, they . These features are not displayed in the graphic that is displayed at the time of check-in or when graphical seat map displayed when checking a passenger or requesting the PS.
The special characteristics that can be associated (both for the to the seats for both, upper deck and for the main deck ) to the seats are the following:

Descripton	Configuration Code	Seat Map Code
Blocked	BS	B
AC Power	AC	E
Infant	AI	i
Available for wheel chairswheelchairs	WC	M
Reserved for the airline (so it won't be sold)	RS	R
Available for unaccompanied minor	UM	U

Configurate features to seats

Special features can be set beconfigured for each seat

The entry to configure the special features for each seat from using the Control Panel is:

PC<flight>/<date><origin>,SMP//<indicator><+><seat number/row/column>

Where:

Indicator: it is the configuration code of the special feature to be configured (according to the table previously described)
Seat: it is the identification of the row and/or column of the seat to be configured, depending on the characteristic to be configured, the row or column must be identified instead of the seat number.
+: Configures the indicated seat and keeps reserved the other seats that were previously reserved.
- If the "+" is not specified, it reconfigures the reserved seats and releases those that were previously configured

Example:

Code Block

language	vb
theme	FadeToGrey

PC4444/10MARAEP,SMP//AI10F

Description:

PC	Mandatory to indicate Control Panel configurations
4444	flight number
/	Slash
10MAR	Departure date
AEP	Origin
,	comma
SM	Seat map indicator
P	indicator to modify the map
//	doble Slash ( used to identify version 2)
AI	code to configurate, in this case AI (infant indicator)
10F	seat to which the characteristic is assigned (row 10 / column F)

Configuration options for more than one seat/full row/full column

9A	Reserve seat 9A
7AC	Reserve seats 7A and 7C
10*	Reserve the entire row 10
1214	Reserve the entire row 12 and 14
*86A**	Reserve the entire row 8 and seat 6A

Delete previously configured features

If you want to delete the configuration of a seat feature, you must enter the command as follows, with the negative symbol in front of the seat number, the same variants can be applied as for reserving seats / rows.

PC<flight>/<date><origin>,SMP//<indicator><-><seat number/row/column>

Example:

Code Block

language	xml
theme	FadeToGrey

PC4444/10MARAEP,SMP//AI-10F

Option to remove and release all seats blocked:

PC<flight>,SMP//BS

Option to delete and release all reserved seats:

PC<flight>,SMP//RS

Delete a configuration:

To delete the configuration of a seat that allows the acceptance of infants in the seat map the following command can be entered:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP//AI-2A

Description:

The fields are the same as those previously described with the difference that the minus symbol before the seat configured with the letter “I”.

The same variants can be applied as for setting up seats/rows.

To eliminate the configuration of all the seats in the seat map with the indicator “i”, the command is:

Code Block

language	xml
theme	FadeToGrey

PC3172/07FEBAEP,SMP//AI

This command eliminates all the seats with the indicator “I” that are configured in the seat map. seating.

Viewing the seat map

You can enter the following command to view the changes made so far, with the following command:

PV<flight>/<date><origin><destination>

Option to display at the bottom of the seat map the text displaying the meaning of the indicators:

PV<flight>/<date><origin><destination>*

Option so that the texts of the references indicating the meaning of the indicators are not displayed at the bottom:

Example without displaying the text of reference:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS

Response:

No Format

PV4444/20FEBROS
     Y                                                                                                                  
     5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   
w>
F    A    A    A    A    A    A    A   iA E  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                      
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    U    A    A    A    A    A    A    A   
B    A    A    A    A    A    A    R    A    A    U    A    A    A    A    A    U    A    A    A    A    A    A    A   
A    A    A    A    A    M    M    A    A    A    U    A$   A    A    A    A    U    A    A    A    A    A    A    A$

Example displaying the text of reference at the bottom:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS*

Response:

No Format

PV4444/20FEBROS
     Y                                                                                                                  
     5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   
w>
F    A    A    A    A    A    A    A   iA E  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                      
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    U    A    A    A    A    A    A    A   
B    A    A    A    A    A    A    R    A    A    U    A    A    A    A    A    U    A    A    A    A    A    A    A   
A    A    A    A    A    M    M    A    A    A    U    A$   A    A    A    A    U    A    A    A    A    A    A    A$  


SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  E           AVAILABLE WITH AC POWER
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  L           AVAILABLE EXTRA LEGROOM SEAT
  M           AVAILABLE TO WHEELCHAIR
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  U           AVAILABLE TO UNACCOMPANIED MINOR
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  *           MULTIPLE OPERATIONAL CHARACTERISTICS
  +           AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Visualization of multiple characteristics of a seat

The alternative for visualizing all the characteristics configured for one seat.

Seats that have multiple features can be identified on the seat map displaying a "+" sign for the commercial features that seat has, and a "*" sign when it has multiple operational features.

To display the multiple characteristics configured for a particular seat, the format is as follows:

PV<flight>/<date><origin><destination>/ST<seat number>

Example:

Code Block

language	xml
theme	FadeToGrey

PV4444/20FEBROS/ST10A

Response:

No Format
PV4444/20FEBROS/ST10A SEAT 10A CHARACTERISTICS ROUTE: ROS/AEP i - ALLOW INFANTS * M - WHEELCHAIR U - UNACCOMPANIED MINOR E - AC POWER

Configuration of characteristics in the equipment seat map (with version 1)

Introduction

This chapter explains the methodology for assigning the special characteristics of the seats in the team's maps through the OAC; taking into account that the activation of the airline for the administration of seat maps is version 1

Description

Special characteristics can be established for each seat and they are defined with this characteristic in the seat map associated with a configuration
Depending on the type of activation that the airline has, there are 2 types of configuration in the administration and display of seat maps.
This chapter describes the methodology for assigning features with version 1 activated Version
Activation by type:
- The version to be used by the airline is configurable by the customer and must be requested from Support for its configuration

Features supported by version 1

This is the current version (default for all airlines)

The features that can be associated with seats are:

Description	Configuration Code	Seat Map Code
Blocked	B	B
Infant	I	I
Other RBD (Reservation Booking Designator)	K	K
Reserved for airline (not to be sold)	R	R
Non-reclining seat	N	/
Window Column	W	w>
Aisle Column	A	»
Emergency Exit	E	=
Over Wing Seats	G	[

Configuration in the seat map

Special characteristics can be established for each seat and they are defined with this characteristic in the seat map associated with a configuration

To configure the special characteristics for each seat in the equipment, the following steps must be carried out

Code Block

language	vb
theme	FadeToGrey

1. OAC/SMR157                 (retrieval of the seat map to be modified)
2. OAC/SMM/                   (seat/row/column configuration)
3. OAC/SMV                    (display of the modified seat map)
4. OAC/SME                    (save the changes made on the seat map)
5. OAC/SMI                    (ignores the changes made)

Retrieval of the seat map

Retrieve the seat map to be configured on the screen with the following command:

To view the seat map of a flight booked on command is the following

OAC/SMR<seat map number>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMR157

Description:

OAC	Fixed command that identifies the configurations (Aircraft Configuration)
/	Slash
SM	Seat map indicator (Seat map)
R	Indicator to retrieve the map on the screen (Retrieve)
157	Id of the KASAT team to which the Seat Map will be associated that will have the same Id number

When executing this command, the system will display the seat map on the screen, for viewing and later modification, as shown below.

Response:

No Format

OAC/SMR157
[157]
   Y        [                                                                                      
   1  2  3  4  5  6  7  8  9  10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 
w>
F     I  I  I  R  A  I  A  A  I  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
E     I  I  I  R  A  I  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
D     I  I  I  R  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
»              =                 =           =  =                                                  
C  I  I  I  I  B  A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
B  I  I  I  I  B  A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
»              =                 =           =  =                                                  
A  I  I  I  I  B  A/ A/ A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  
w>
 

SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  /           RECLINE RESTRICTED
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Modification/configuration of seating characteristics

Depending on the version activated for the management of the seating map, the commands to configure the special characteristics of the seats are the following:
- Once the seating map is displayed, it must be indicated the modification to be made.
Depending on the version activated for managing seat map management, the commands to configure the special characteristics of seats are as follows

Configure a feature:

OAC/SMM/<indicator><seat>

Where:

Indicator: is the code of configuration of the special feature to be configured (according to the table previously described; in this case for this version the code is one character)
Seat: it is the identification of the row and/or column of the seat to be configured

Example:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM/I10F

Description:

OAC	Fixed command that identifies the configurations (Aircraft Configuration)
/	Slash
SM	Seat map
M	Indicator to modify the previously displayed map (modify)
/	Slash
I	Feature code to configure, in this case I (infant indicator)
10F	Seat to which the characteristic is assigned (row 10 / column F)

Configuration options for more than one seat/full row/c full column

One seat: 2A
Multiple seats: 2AB3C
One full row: 4*
Multiple full rows: 4*5*
One seat and one full row: 3B5*

Delete a previously configured feature

If you want to delete the configuration of a feature from an entry, you must enter the command as follows, with the negative symbol in front of the entry number, as shown below:

OAC/SMM/<indicator>-<seat>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMM/I-10F

This entry removes the permission for an adult with an infant to sit in seat 10F

Visualización / Redespliegue mapa de asientos

Once the modifications have been entered in the seat map, you can enter the following command to display the changes made so far, with the following command:

Code Block

language	vb
theme	FadeToGrey

OAC/SMV

Ignore Seat Map

At any time you can ignore what is being modified or created:

Code Block

language	vb
theme	FadeToGrey

OAC/SMI

Save Seat Map

Once all the indicators have been added, the seat map must be saved/recorded:

Code Block

language	java
theme	FadeToGrey

OAC/SME

Delete a seat map

OAC/SMD{seat map number created}

Clone a seat map

OAC/SMC{seat map number created}

Graphical seat map generation

Once the seat map has been created, a graphical version can be generated

OAC/SMG{seat map number created}

Note
If the configuration of a seat map, which is being used on a flight, is modified, the changes will not be automatically displayed because the aircraft registration in use will have to be unassigned for assigning a different one and then reassigning the original one. At this time the changes made in the OAC/SM will be displayed.

List of Commands

Item	Command	Description	Example
OAC/SMx Modifiers	OAC/SMx *: List all A: Add M: Modify D: Delete R: Retrieve V: View I: Ignore E: End and Save changes	Possible modifiers for OAC/ SMx
List	OAC/SM*	List of equipments created
Retrieve	OAC/SMR/<id Seat Map>	Retrieve Seat Map on screen	OAC/SMR1
Ignore	OAC/SMI	Ignore retrieved Seat Map
View	OAC/SMV	Redisplay Seat Map recovered
Save changes	OAC/SME	Save changes applied to the retrieved Seat Map
Delete	OAC/SMD/<id Seat Map>	Delete Seat Map	OAC/SMD1
OAC/SMM//x Modifiers	OAC/SMM/x I: Assign Infants B: Blocked Seat R: Reserved Seat W: Window (sólo a columnas) A: Aisle (sólo a columnas) G: Wing (sólo a filas) N: Not Recline E: Emergency Exit (sólo a filas) V: Preferential Seat K: RBDs restriction (sólo a filas)	Possible modifiers for OAC/SMM/x
Window	OAC/SMM/W<column> OAC/SMM/W-<column>	Indicate window column	OAC/SMM/WA OAC/SMM/W-A
Aisle	OAC/SMM/A<column> OAC/SMM/A-<column>	Indicate aisle column	OAC/SMM/AG OAC/SMM/A-G
Wings	OAC/SMM/G<row> OAC/SMM/G-<row>	Indicate rows above wings	OAC/SMM/G8 OAC/SMM/G-8
Exit	OAC/SMM/E<row> OAC/SMM/E-<row>	Indicate rows of Emergency Exit	OAC/SMM/E8 OAC/SMM/E-8
Infant	OAC/SMM/I<rows/seats> OAC/SMM/I-<rows/seats>	Indicate rows/seats suitable for infants	OAC/SMM/I112H13 OAC/SMM/I-12H
Reserved	OAC/SMM/R<rows/seats> OAC/SMM/R-<rows/seats>	Indicate rows/seats Reserved	OAC/SMM/R3* OAC/SMM/R-3*
Blocked	OAC/SMM/B<rows/seatss> OAC/SMM/B-<rows/seats>	Indicate rows/seats Blocked	OAC/SMM/B5AB OAC/SMM/B-5A
Non-reclining	OAC/SMM/N<rows/seatss> OAC/SMM/N-<rows/seats>	Indicate non-reclining rows/seats	OAC/SMM/N3* OAC/SMM/N-3D
Preferential	OAC/SMM/V<rows/seats> OAC/SMM/V-<rows/seats>	Indicate rows/seats Preferential (VIP)	OAC/SMM/V3* OAC/SMM/V-3*
RBD	OAC/SMM/K<rows>/<RBDs> OAC/SMM/K<rows>/*	Indicate rows with restrictions according to RBD (* indicates all RBDs)	OAC/SMM/K113/ABK OAC/SMM/K113/*

Configuration of characteristics in the equipment seat map (with version 2)

Introduction

This chapter explains the methodology for assigning the special characteristics of the seats in the seating maps of the teams through the OAC; taking into account that the activation of the airline for the administration of seat maps is version 2.

Description

Special characteristics can be established for each seat and that they are defined with this characteristic in the seat map associated with a configuration
Depending on the type of activation that the airline has, there are 2 types of configuration in the administration and visualization of seat maps.
This chapter describes the methodology for assigning features with version 1 activated Version

Activation by type:

The version to be used by the airline is configurable by the customer and must be requested from Support for its configuration

Features supported by the version 2

This version incorporates the possibility of assigning and displaying multiple characteristics to the same seat and allows managing new characteristics that are not in force in version 1 (seats that have an electricity charger, seats that allow assigning people in wheelchairs, seats that allow unaccompanied minors to sit)
It also allows the configuration of seat maps identifying aircraft configurations with two floors. The upper deck is identified as the upper deck and the main deck as the main deck
In the seats that are in the rows configured in the upper deck, special and multiple characteristics can also be configured (in the same way that it is configured in the main deck)
This configuration It allows managing the map of seats that contain multiple characteristics in the same seat (both operational and commercial) and also incorporates the possibility of configuring/viewing seats that allow passengers with reduced mobility (wheelchair) and unaccompanied minor (unaccompanied minor).
These new features are only displayed on the drop-down seat map at the PV, PC, OAC and KPRS, that is, they are not displayed on the graph that is displayed at the time of check-in or when requesting the PS.

The special characteristics that can be associated (both for the upper deck and for the main deck) to the seats are the following:

Description	Configuration Code	Seat Map Code
Blocked	BS	B
AC Power	AC	E
Infant	AI	i
Other RBD (Reservation Booking Designator)	BK	K
Extra legroom	LS	L
Available for wheelchair	WC	M
Pre-reserved seat (PRS)	N/A (from KPRS function)	P
Reserved for the airline (not to be sold)	RS	R
Available for Unaccompanied Minor	UM	U
Preferent/Premium Seat	VS	V
Non-Reclining Seat	NR	/
At Cost Seat	CS	$
Window Column	WN	w>
Aisle Column	AL	»
Emergency exit seat	EX	=
Overwing seats	WG	[
Upper deck	UP	<upper deck>
Only Adults	OA	O

Seat map configuration

Special characteristics can be configured for each seat and they are defined with this characteristic in the seat map associated with a configuration

To configure the special characteristic features for each seat in the equipment, perform following steps:

Code Block

language	xml
theme	FadeToGrey

1. OAC/SMR157                 (seat map retrieval to modify)
2. OAC/SMM/                   (seat/row/column configuration)
3. OAC/SMV                    (seat map display modified seat map)
4. OAC/SME                    (save the changes made to the seat map)
5. OAC/SMI                    (ignores the changes made)

Seat map retrieval

Retrieve on screen the seat map to be configured with the following command:

To see the seat map of a reserved flight, the command is the following

OAC/SMR<seat map number>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMR157

Description:

OAC	Fixed command that identifies the configurations (Aircraft Configuration)
/	Slash
SM	Seat Map Indicator
R	Indicator to retrieve the map on the screen (Retrieve)
157	Id of the KASAT list to which the Seat Map was associated and will have the same Id number

When transmitting this command, the system will display the seat map on the screen for viewing and updating:

Response:

No Format

OAC/SMR157
[157]
     Y              [                                                                                                                                                
     1    2    3    4    5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   
w>
F        iA   iA   iA    R    A   i*$L  U    A   iA    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E        iA   iA   iA    R    A   iA$+  M    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D        iA   iA   iA    R    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                             =                   =    =                                                                                   
C   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
B   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                             =                   =    =                                                                                   
A   iA   iA   iA   iA    B    /    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
w>
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS


SEAT REFERENCES:
  -            OCCUPPIED
  A           AVAILABLE
  B           BLOCKED
  E           AVAILABLE WITH AC POWER
  F           AVAILABLE TO FREQUENT FLYER PASSENGER
  I           AVAILABLE WITH INFANTS
  K           AVAILABLE TO OTHER RBD
  L           AVAILABLE EXTRA LEGROOM SEAT
  M           AVAILABLE TO WHEELCHAIR
  P           PRE-RESERVED SEAT
  R           RESERVED FOR AIRLINE
  U           AVAILABLE TO UNACCOMPANIED MINOR
  V           AVAILABLE PREFERENT/PREMIUM SEAT
  *           MULTIPLE OPERATIONAL CHARACTERISTICS
  +           AVAILABLE FOR MULTIPLE COMMERCIAL CHARACTERISTICS
  /           RECLINE RESTRICTED
  $           CHARGEABLE SEAT
  w>          WINDOWS
  »           CORRIDOR
  =           EMERGENCY EXIT
  [           WINGS

Modification/configuration of seat characteristics

The commands to configure the special seat characteristics are as follows:
- Once the seat map is displayed, indicate the update or modification to be made.
Depending on the activated version for managing the seat map, the commands to configure the special seat characteristics are the following

Code Block

language	vb
theme	FadeToGrey

OAC/SMM//<indicator><seat>

Where:

Indicator: is the configuration code of the special feature to configure (according to the table previously described; in this case for this version the code is two characters)
Seat: is the identification of the row and/or column of the seat to configure

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMM//AI10F

Description:

OAC	Fixed command that identifies the configurations (Aircraft Configuration)
/	Slash
SM	Seat map
M	Indicator to modify the previously displayed map (modify)
//	Double Slash (used to identify version 2)
AI	Feature code to configure, in this case AI (infant indicator)
10F	Seat to which the feature is assigned (row 10 / column F)

Configuration options for more a seat/ several seats/full row/full column

One seat: 2A
Multiple seats: 2AB3C
One full row: 4*
Multiple full rows: 4*5*
One seat and one full row: 3B5*

Equipment Row Configuration with two floors

This version allows the seat map configuration for aircraft with two floors. The upper deck is identified as upper deck and the main deck as the main deck
It must be configured per full row and allows each seat located on the upper deck to be configured with any of the special characteristics supported (Infant/Unaccompanied Minor, etc.)

Having retrieved the seat map, that is:

No Format

OAC/SMR143
[143]
     F         C                        Y                                                                                                                                                                                   
     1    2    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   
K    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
J              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
H    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
G              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                         
E                                       A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                         
B              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    <= ROW SHOWN IN AGT
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

The rows that will be in the upper deck can be configured as follows:

Code Block

language	java
theme	FadeToGrey

OAC/SMM//<indicator><row>

Where UP is the indicator

Example:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM//UP10

Response:

No Format
OAC/SMM//UP10 OK

Modified seat map display:

No Format

 UPPER DECK
     C     
     10   
K    A   
J    A   
H    A   
G    A   
»         
E        
D    A   
C    A   
»         
B    A   
A    A   
     N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    <= ROW SHOWN IN AGT
     N    <= ROW HAS RBD RESTRICTIONS
MAIN DECK
     F         C                   Y                                                                                                                                                                                   
     1    2    6    7    8    9    11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   
K    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
J              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
H    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
G              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                    
E                                  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
C    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                                                                                                                                                                                                                    
B              A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    Y    <= ROW SHOWN IN AGT
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

Delete a previously configured feature

If you want to delete the configuration of a feature of a seat, you must enter the command as follows, with the symbol negative in front of the seat number, as shown below:

OAC/SMM//<indicator>-<seat>

Example:

Code Block

language	xml
theme	FadeToGrey

OAC/SMM//AI-10F

With this entry the permission is removed so that seat 10F is available for a passenger with no infant

View / Redisplay seat map

Once the updates have been registered in the seat map, you can view these changes by transmitting the following command:

Code Block

language	java
theme	FadeToGrey

OAC/SMV

Ignore seat map

To ignore what is being modified or created before:

Code Block

language	java
theme	FadeToGrey

OAC/SMI

Save seat map

Once all the indicators have been added, you must record/save the seat map characteristics:

Code Block

language	java
theme	FadeToGrey

OAC/SME

Delete seat map

OAC/SMD{seat map number created}

Clone seat map

OAC/SMC{seat map number created}

Generate a graphical seat map

Once the seat map is created, we can generate a graphical seat map.

OAC/SMG{seat map number created}

Note
If the configuration of a seat map, which is in use for a flight, is modified, the changes will not be automatically shown. The aircraft registration in use will have to be unassigned, then a different registration should be assigned before reassigning the original registration in order to view the latest updates introduced. At this time the changes made in the OAC/SM will be displayed.

Displaying multiple characteristics of a seat

The option of visualizing all the characteristics configured in the same seat is incorporated.
Seats that have multiple features can be identified on the seat map showing a "+" sign for the commercial features that seat has, and a "*" sign when it has multiple operational features
Identification of multiple characteristics for the same entry (from the SMR or with the SMV)

Example (seats 7F y 7E)

Code Block

language	vb
theme	FadeToGrey

OAC/SMV<seat>

Response:

No Format

OAC/SMV
[157]
     Y              [                                                                                                                                                
     1    2    3    4    5    6    7    8    9    10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   
w>
F        iA   iA   iA    R    A   i*$L  A    A   iA    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
E        iA   iA   iA    R    A   iA$+  A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
D        iA   iA   iA    R    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                                                 =    =                                                                                   
C   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
B   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
»                        =                                                 =    =                                                                                   
A   iA   iA   iA   iA    B    /    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A    A   
w>
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS FREQUENT FLYER RESTRICTIONS
     N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    N    <= ROW HAS RBD RESTRICTIONS

To view the multiple characteristics contained in a particular seat, the format is as follows:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/<seat>

Example:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/7E

Response:

No Format
SEAT 7E CHARACTERISTICS i - ALLOW INFANTS $ - CHARGEABLE SEAT L - EXTRA LEGROOM SEAT E - AC POWER

Ejemplo:

Code Block

language	vb
theme	FadeToGrey

OAC/SMS/7F

Respuesta:

No Format
SEAT 7F CHARACTERISTICS i - ALLOW INFANTS M - WHEELCHAIR U - UNACCOMPANIED MINOR $ - CHARGEABLE SEAT L - EXTRA LEGROOM SEAT w> - WINDOWS SEAT

Description:

OAC	Fixed command that identifies the configurations (Aircraft Configuration)
/	Slash
SM	Seat map indicator
S	IShow indicator
/	Slash
7F	Seat that has a "*" in the previous display

List of Commands

Item	Command	Description	Example
OAC/SMx Modifiers	OAC/SMx *: List all A: Add M: Modify D: Delete R: Retrieve V: View I: Ignore E: End and Save changes	Possible modifiers for OAC/SMx
List	OAC/SM*	List of created equipments
Retrieve	OAC/SMR/<id Seat Map>	Retrieve Seat Map on screen	OAC/SMR1
Ignore	OAC/SMI	Ignore Retrieved Seat Map
View	OAC/SMV	Redisplay Retrieved Seat Map
Save Changes	OAC/SME	Save Changes Applied to Retrieved Seat Map
Delete	OAC/SMD/<id Seat Map>	Delete Seat Map	OAC/SMD1
OAC/SMM//x Modifiers	OAC/SMM//x AI: Assign Infants AC: Phone Charger CS: Chargeable Seat BS: Blocked Seat RS: Reserved Seat WN: Window (only columns) AL: Aisle (only columns) WG: Wing (only rows) NR: Not Recline EX: Emergency Exit (only rows) LS: Extra Leg Room Seat VS: Preferential Seat BK: RBDs restriction (only rows) WC: Wheelchair UM: Unaccompanied minor OA: Only Adults	Possible modifiers for OAC/SMM//x
Window	OAC/SMM//WN<column> OAC/SMM//WN-<column>	Indicate window column	OAC/SMM//WNA OAC/SMM//WN-A
Aisle	OAC/SMM//AL<column> OAC/SMM//AL-<column>	Indicate aisle column	OAC/SMM//ALG OAC/SMM//AL-G
Wings	OAC/SMM//WG<row> OAC/SMM//WG-<row>	Indicate rows above wings	OAC/SMM//WG8 OAC/SMM//WG-8
Exit	OAC/SMM//EX<row> OAC/SMM//EX-<row>	Indicate rows of Emergency Exit	OAC/SMM//EX8 OAC/SMM//EX-8
Infant	OAC/SMM//AI<rows/seats> OAC/SMM//AI-<rows/seats>	Indicate rows/seats suitable for infants	OAC/SMM//AI112H13 OAC/SMM//AI-12H
Reserved	OAC/SMM//RS<rows/seats> OAC/SMM//RS-<rows/seats>	Indicate rows/seats Reserved	OAC/SMM//RS3* OAC/SMM//RS-3*
Blocked	OAC/SMM//BS<rows/seats> OAC/SMM//BS-<rows/seats>	Indicate rows/ Blocked seats	OAC/SMM//BS5AB OAC/SMM//BS-5A
No Recline	OAC/SMM//NR<rows/seats> OAC/SMM//NR-<rows/seats>	Indicate non-reclining rows/seats	OAC/SMM//NR3* OAC/SMM//NR-3D
Preferential	OAC/SMM//VS<rows/seats> OAC/SMM//VS-<rows/seats>	Indicate rows/Preferential seats (VIP)	OAC/SMM//VS3* OAC/SMM//VS-3*
Extra Leg	OAC/SMM//LS<rows/seats> OAC/SMM//LS-<rows/seats>	Indicate rows/seats with extra space (Extra Leg Room)	OAC/SMM//LS3* OAC/SMM//LS-3*
Cost	OAC/SMM//CS<rows/seats> OAC/SMM//CS-<rows/seats>	Indicate rows/seats with cost	OAC/SMM//CS11DEF OAC/SMM//CS-11E
RBD	OAC/SMM//BK<rows>/<RBDs> OAC/SMM//BK<row>/*	Indicate rows with restrictions according to RBD (* indicates all RBDs)	OAC/SMM//BK113/ABK OAC/SMM//BK113/*
AC Power (cellphone charger)	OAC/SMM//AC<rows/seats> OAC/SMM//AC<rows/seats>	Indicate rows with power charger	OAC/SMM//AC112H13 OAC/SMM//AC112H13
WC (wheelchair)	OAC/SMM//WC<rows/seats> OAC/SMM//WC<rows/seats>	Indicate rows/seats available for wheelchair	OAC/SMM//WC112H13 OAC/SMM//WC112H13
UM (unaccompanied minor)	OAC/SMM//UM<rows/seats> OAC/SMM//UM<rows/seats>	Indicate rows/seats available for unaccompanied minor	OAC/SMM//UM112H13 OAC/SMM//UM112H13
Upper deck	OAC/SMM//UP<row>	Indicate row located on the upper deck	OAC/SMM//UP10
Only Adults	OAC/SMM//OA<rows/seats>	Indicate rows/seats that only accept adult passengers	OAC/SMM//OA112H13

Quick Reference Seat Map Configuration (OAC/PC)

Seat map quick guide

Feature	Seatmap display Unit	Configuration with VSM-1 (OAC/SMM/)	Configuration with VSM-2 (OAC/SMM//)	PC Configuration with VSM-1	PC Configuration with VSM-2
Blocked	B	OAC/SMM/B1A	OAC/SMM//BS1A	PC301/6MARMAD,SMP/B+2J	PC301/6MARMAD,SMP//BS+2J
AC Power	E	N/A	OAC/SMM//AC1A	N/A	PC210/7JANAEP,SMP//AC5F
Infant	I	OAC/SMM/I1A	OAC/SMM//AI1A	PC210/7JANAEP,SMP/I4F	PC210/7JANAEP,SMP//AI4F
Other RBD	K	OAC/SMM/K1A	OAC/SMM//BK1A	N/A	N/A
Extra legroom	L	N/A	OAC/SMM//LS1A	N/A	N/A
Wheelchair	M	N/A	OAC/SMM//WC1A	N/A	PC210/7JANAEP,SMP//WC4F
Pre-reserved seat	P	N/A	N/A	N/A	N/A
Reserved for airline	R	OAC/SMM/R1A	OAC/SMM//RS1A	PC210/7JANAEP,SMP/R3A	PC210/7JANAEP,SMP//RS4F
Unaccompanied minor	U	N/A	OAC/SMM//UM1A	N/A	PC3270/1JUNCOR,SMP//UM8A
Preferent/Premium seat	V	OAC/SMM/V1A	OAC/SMM//VS1A	N/A	N/A
Multiple operating features	*	N/A	N/A	N/A	N/A
Multiple commercial features	+	N/A	N/A	N/A	N/A
Non-reclinable Seat	/	OAC/SMM/N10A	OAC/SMM//NR1A	N/A	N/A
Seat with charge	$	N/A	OAC/SMM//CS1A	N/A	N/A
Window Column	w>	OAC/SMM/WF	OAC/SMM//WNF	N/A	N/A
Aisle Column	>>	OAC/SMM/AD	OAC/SMM//ALD	N/A	N/A
Emergency Exit	=	OAC/SMM/E5	OAC/SMM//EX5	N/A	N/A
Wing	[	OAC/SMM/G4	OAC/SMM//WG4	N/A	N/A
Upper deck	UPPER DECK	N/A	OAC/SMM//UP10	N/A	N/A
Only Adults	O	N/A	OAC/SMM//OA1*5ABC	N/A	N/A

Version	Old Version 25	New Version 26
Changes made by	ana herradon (Unlicensed)	ana herradon (Unlicensed)
Saved on	Aug 08, 2023	Aug 09, 2023

Page Comparison

Versions Compared

Key

Managing the seat map from the control panel (version 1)

Blocked or

reserved seats

Managing the seat map by using entries

Reserve Seats

Block Seats

Seat indicator for infant on adult´s lap

Delete lap Infant indicator

Managing the seat map from the control panel (version 2)

Configurate features to seats

Delete previously configured features

Delete a configuration:

Viewing the seat map

Visualization of multiple characteristics of a seat

Configuration of characteristics in the equipment seat map (with version 1)

Features supported by version 1

Configuration in the seat map

Retrieval of the seat map

Modification/configuration of seating characteristics

Delete a previously configured feature

Visualización / Redespliegue mapa de asientos

Graphical seat map generation

List of Commands

Configuration of characteristics in the equipment seat map (with version 2)

Features supported by the version 2

Seat map configuration

Seat map retrieval

Modification/configuration of seat characteristics

Equipment Row Configuration with two floors

Delete a previously configured feature

View / Redisplay seat map

Ignore seat map

Save seat map

Delete seat map

Clone seat map

Generate a graphical seat map

Displaying multiple characteristics of a seat

List of Commands

Quick Reference Seat Map Configuration (OAC/PC)

Seat map quick guide